Uticaj temperature ivice žljeba i unete toplote na strukturu i tvrdoću zone uticaja toplote zavarenog spoja čelika P 460 NL1
The impact of groove edge temperature and heat input on the structure and hardness of the heat affected zone of steel 460 NL1 welded joint
2018
Аутори
Jovičić, RadomirSedmak, Simon
Ilić, Nada
Radović, Ljubica
Štrbački, Svetlana
Antić, Milica
Burzić, Zijah
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Polazne strukture i vreme hlađenja u temperaturnom intervalu 800 - 500°C (t8/5) imaju presudan uticaj na strukture i osobine zone uticaja toplote zavarenih spojeva čelika. Na vreme hlađenja t8/5 između ostalog, utiče i temperatura ivice žleba. Zbog zagrevanja toplotom luka temperatura ivice žleba duž spoja raste, zbog čega se vreme hlađenja zone uticaja toplote produžava. Samim tim, duž spoja se produžava i vreme hlađenja t8/5. U radu su prikazani rezultati merenja temperatura ivica žleba pri zavarivanju višeprolaznog sučeonog spoja mikrolegiranog čelika P 460 NL1. Određen je uticaj ovih temperatura na vremena hlađenja t8/5 i na makro i mikrostrukture i tvrdoće u zoni uticaja toplote ovog zavarenog spoja.
The starting structures and cooling times in the temperature range 800 - 500°C (t8/5) have a decisive influence on the structures and properties of the heat affected zone of steel welded joints. At the cooling time t8/5, inter alia, the groove edge temperature has an effect. Due to heating by the electrical arc, the groove edge temperature along the joint, increases, resulting in extending of the cooling time of the heat affected zone. Therefore, the cooling time t 8/5 is extended along the joint. The paper presents the measurement results of the groove edges temperature during the welding of the multilayer joint of the microalloyed steel P 460 NL1. The influence of these temperatures on the cooling time t8/5 and on the macro and microstructure and hardness in the heat affected zone of this welded joint was determined.
Кључне речи:
vreme hlađenja t8/5 / tvrdoće / temperatura ivica žleba / strukture / structure / hardness / groove edge temperature / cooling time t 8/5Извор:
Zavarivanje i zavarene konstrukcije, 2018, 63, 3, 101-113Издавач:
- DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd
Финансирање / пројекти:
- Истраживање могућности унапређења технологије заваривања микролегираних челика (RS-MESTD-Technological Development (TD or TR)-35024)
Институција/група
Inovacioni centarTY - JOUR AU - Jovičić, Radomir AU - Sedmak, Simon AU - Ilić, Nada AU - Radović, Ljubica AU - Štrbački, Svetlana AU - Antić, Milica AU - Burzić, Zijah PY - 2018 UR - https://machinery.mas.bg.ac.rs/handle/123456789/2748 AB - Polazne strukture i vreme hlađenja u temperaturnom intervalu 800 - 500°C (t8/5) imaju presudan uticaj na strukture i osobine zone uticaja toplote zavarenih spojeva čelika. Na vreme hlađenja t8/5 između ostalog, utiče i temperatura ivice žleba. Zbog zagrevanja toplotom luka temperatura ivice žleba duž spoja raste, zbog čega se vreme hlađenja zone uticaja toplote produžava. Samim tim, duž spoja se produžava i vreme hlađenja t8/5. U radu su prikazani rezultati merenja temperatura ivica žleba pri zavarivanju višeprolaznog sučeonog spoja mikrolegiranog čelika P 460 NL1. Određen je uticaj ovih temperatura na vremena hlađenja t8/5 i na makro i mikrostrukture i tvrdoće u zoni uticaja toplote ovog zavarenog spoja. AB - The starting structures and cooling times in the temperature range 800 - 500°C (t8/5) have a decisive influence on the structures and properties of the heat affected zone of steel welded joints. At the cooling time t8/5, inter alia, the groove edge temperature has an effect. Due to heating by the electrical arc, the groove edge temperature along the joint, increases, resulting in extending of the cooling time of the heat affected zone. Therefore, the cooling time t 8/5 is extended along the joint. The paper presents the measurement results of the groove edges temperature during the welding of the multilayer joint of the microalloyed steel P 460 NL1. The influence of these temperatures on the cooling time t8/5 and on the macro and microstructure and hardness in the heat affected zone of this welded joint was determined. PB - DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd T2 - Zavarivanje i zavarene konstrukcije T1 - Uticaj temperature ivice žljeba i unete toplote na strukturu i tvrdoću zone uticaja toplote zavarenog spoja čelika P 460 NL1 T1 - The impact of groove edge temperature and heat input on the structure and hardness of the heat affected zone of steel 460 NL1 welded joint EP - 113 IS - 3 SP - 101 VL - 63 DO - 10.5937/zzk1803101J ER -
@article{ author = "Jovičić, Radomir and Sedmak, Simon and Ilić, Nada and Radović, Ljubica and Štrbački, Svetlana and Antić, Milica and Burzić, Zijah", year = "2018", abstract = "Polazne strukture i vreme hlađenja u temperaturnom intervalu 800 - 500°C (t8/5) imaju presudan uticaj na strukture i osobine zone uticaja toplote zavarenih spojeva čelika. Na vreme hlađenja t8/5 između ostalog, utiče i temperatura ivice žleba. Zbog zagrevanja toplotom luka temperatura ivice žleba duž spoja raste, zbog čega se vreme hlađenja zone uticaja toplote produžava. Samim tim, duž spoja se produžava i vreme hlađenja t8/5. U radu su prikazani rezultati merenja temperatura ivica žleba pri zavarivanju višeprolaznog sučeonog spoja mikrolegiranog čelika P 460 NL1. Određen je uticaj ovih temperatura na vremena hlađenja t8/5 i na makro i mikrostrukture i tvrdoće u zoni uticaja toplote ovog zavarenog spoja., The starting structures and cooling times in the temperature range 800 - 500°C (t8/5) have a decisive influence on the structures and properties of the heat affected zone of steel welded joints. At the cooling time t8/5, inter alia, the groove edge temperature has an effect. Due to heating by the electrical arc, the groove edge temperature along the joint, increases, resulting in extending of the cooling time of the heat affected zone. Therefore, the cooling time t 8/5 is extended along the joint. The paper presents the measurement results of the groove edges temperature during the welding of the multilayer joint of the microalloyed steel P 460 NL1. The influence of these temperatures on the cooling time t8/5 and on the macro and microstructure and hardness in the heat affected zone of this welded joint was determined.", publisher = "DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd", journal = "Zavarivanje i zavarene konstrukcije", title = "Uticaj temperature ivice žljeba i unete toplote na strukturu i tvrdoću zone uticaja toplote zavarenog spoja čelika P 460 NL1, The impact of groove edge temperature and heat input on the structure and hardness of the heat affected zone of steel 460 NL1 welded joint", pages = "113-101", number = "3", volume = "63", doi = "10.5937/zzk1803101J" }
Jovičić, R., Sedmak, S., Ilić, N., Radović, L., Štrbački, S., Antić, M.,& Burzić, Z.. (2018). Uticaj temperature ivice žljeba i unete toplote na strukturu i tvrdoću zone uticaja toplote zavarenog spoja čelika P 460 NL1. in Zavarivanje i zavarene konstrukcije DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd., 63(3), 101-113. https://doi.org/10.5937/zzk1803101J
Jovičić R, Sedmak S, Ilić N, Radović L, Štrbački S, Antić M, Burzić Z. Uticaj temperature ivice žljeba i unete toplote na strukturu i tvrdoću zone uticaja toplote zavarenog spoja čelika P 460 NL1. in Zavarivanje i zavarene konstrukcije. 2018;63(3):101-113. doi:10.5937/zzk1803101J .
Jovičić, Radomir, Sedmak, Simon, Ilić, Nada, Radović, Ljubica, Štrbački, Svetlana, Antić, Milica, Burzić, Zijah, "Uticaj temperature ivice žljeba i unete toplote na strukturu i tvrdoću zone uticaja toplote zavarenog spoja čelika P 460 NL1" in Zavarivanje i zavarene konstrukcije, 63, no. 3 (2018):101-113, https://doi.org/10.5937/zzk1803101J . .