Application of the high strength steel hardox 450 for manufacturing of assemblies in the military industry
Samo za registrovane korisnike
2017
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
The problems related to welding of the high strength steel, aimed for manufacturing of welded structures operating in the prominent wear conditions, is considered in this paper. The paper presents an analysis of possibilities and prescribing the technology for welding the high strength steel HARDOX 450. The methodology for estimate the weldability of this steel was established in the theoretical part of the paper, as well as calculations of the welding parameters, while the hardness was investigated in details and the macro and micro structures of the individual welded joint zones were estimated in the experimental part. Obtained experimental results could be usefully applied for selecting and establishing the optimal welding technology for structures made of this steel. The technology thus established and the GMAW welding regime can enable successful execution of the welded joints and reduce the possibility for appearance of flaws and cracks to a minimum.
Ključne reči:
Welding technology / Microstructure / High strength steel / HARDOX 450 / HardnessIzvor:
Key Engineering Materials, 2017, 755, 96-105Izdavač:
- Trans Tech Publications Ltd
Finansiranje / projekti:
- This research was partially financially supported by European regional development fund and Slovak state budget by the project "Research Centre of the University of Žilina" – ITMS 26220220183 and by the Ministry of Education, Science and Technological Development
DOI: 10.4028/www.scientific.net/KEM.755.96
ISSN: 1013-9826
Scopus: 2-s2.0-85032938971
Kolekcije
Institucija/grupa
Mašinski fakultetTY - JOUR AU - Lazić, Vukić AU - Arsić, D. AU - Nikolić, R.R. AU - Đorđević, D. AU - Prokić-Cvetković, Radica AU - Popović, Olivera PY - 2017 UR - https://machinery.mas.bg.ac.rs/handle/123456789/2733 AB - The problems related to welding of the high strength steel, aimed for manufacturing of welded structures operating in the prominent wear conditions, is considered in this paper. The paper presents an analysis of possibilities and prescribing the technology for welding the high strength steel HARDOX 450. The methodology for estimate the weldability of this steel was established in the theoretical part of the paper, as well as calculations of the welding parameters, while the hardness was investigated in details and the macro and micro structures of the individual welded joint zones were estimated in the experimental part. Obtained experimental results could be usefully applied for selecting and establishing the optimal welding technology for structures made of this steel. The technology thus established and the GMAW welding regime can enable successful execution of the welded joints and reduce the possibility for appearance of flaws and cracks to a minimum. PB - Trans Tech Publications Ltd T2 - Key Engineering Materials T1 - Application of the high strength steel hardox 450 for manufacturing of assemblies in the military industry EP - 105 SP - 96 VL - 755 DO - 10.4028/www.scientific.net/KEM.755.96 ER -
@article{ author = "Lazić, Vukić and Arsić, D. and Nikolić, R.R. and Đorđević, D. and Prokić-Cvetković, Radica and Popović, Olivera", year = "2017", abstract = "The problems related to welding of the high strength steel, aimed for manufacturing of welded structures operating in the prominent wear conditions, is considered in this paper. The paper presents an analysis of possibilities and prescribing the technology for welding the high strength steel HARDOX 450. The methodology for estimate the weldability of this steel was established in the theoretical part of the paper, as well as calculations of the welding parameters, while the hardness was investigated in details and the macro and micro structures of the individual welded joint zones were estimated in the experimental part. Obtained experimental results could be usefully applied for selecting and establishing the optimal welding technology for structures made of this steel. The technology thus established and the GMAW welding regime can enable successful execution of the welded joints and reduce the possibility for appearance of flaws and cracks to a minimum.", publisher = "Trans Tech Publications Ltd", journal = "Key Engineering Materials", title = "Application of the high strength steel hardox 450 for manufacturing of assemblies in the military industry", pages = "105-96", volume = "755", doi = "10.4028/www.scientific.net/KEM.755.96" }
Lazić, V., Arsić, D., Nikolić, R.R., Đorđević, D., Prokić-Cvetković, R.,& Popović, O.. (2017). Application of the high strength steel hardox 450 for manufacturing of assemblies in the military industry. in Key Engineering Materials Trans Tech Publications Ltd., 755, 96-105. https://doi.org/10.4028/www.scientific.net/KEM.755.96
Lazić V, Arsić D, Nikolić R, Đorđević D, Prokić-Cvetković R, Popović O. Application of the high strength steel hardox 450 for manufacturing of assemblies in the military industry. in Key Engineering Materials. 2017;755:96-105. doi:10.4028/www.scientific.net/KEM.755.96 .
Lazić, Vukić, Arsić, D., Nikolić, R.R., Đorđević, D., Prokić-Cvetković, Radica, Popović, Olivera, "Application of the high strength steel hardox 450 for manufacturing of assemblies in the military industry" in Key Engineering Materials, 755 (2017):96-105, https://doi.org/10.4028/www.scientific.net/KEM.755.96 . .