The influence of the valena metal-plating additive on tribotechnical characteristics of the Steel-Bronze tribological system
Само за регистроване кориснике
2016
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
The paper considers a change in the coefficient of friction and the temperature distribution in the contact zone of the steel-bronze tribosystem. Investigations were carried out by the shaft-bushing system for three values of the load in the mixed-to-boundary lubrication regime with SAE 80W transmission oil without and with Valena additive. It is found that the additive presence in oil decreases the coefficient of friction by 11-21%, depending on the applied load. At the same time, the maximum decrease in the coefficient of friction is observed at a maximum applied load of 1500 N.
Кључне речи:
Valena additive / lubricant / contact temperature / coefficient of frictionИзвор:
Journal of Friction and Wear, 2016, 37, 2, 187-190Издавач:
- Pleiades Publishing Inc, Moscow
Финансирање / пројекти:
- Program for Scientific-Technological Collaboration in the Tribology Study of the Metal-Plating Additive Valena of the Tribology Center at TU Sofia
- Rudservice company from Gezkazgan, Kazakhstan
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200105 (Универзитет у Београду, Машински факултет) (RS-MESTD-inst-2020-200105)
- Faculty of Industrial Technology at the Technical University of Sofia
- FP7-REGPOT project: AComIn (Advanced Computing for Innovation) [316087]
- FP7 Capacity Programme (Research Potential of Convergence Regions)
- CEEPUS III Network [CIII-BG-0703]
- Bulgarian Ministry of Education and Science [DUNK-01/3
- Истраживање и оптимизација технолошких и функционалних перформанси вентилационог млина термоелектране Костолац Б (RS-MESTD-Technological Development (TD or TR)-34028)
- Развој триболошких микро/нано двокомпонентних и хибридних самоподмазујућих композита (RS-MESTD-Technological Development (TD or TR)-35021)
DOI: 10.3103/S1068366616020082
ISSN: 1068-3666
WoS: 000376616500017
Scopus: 2-s2.0-84971635372
Колекције
Институција/група
Mašinski fakultetTY - JOUR AU - Kandeva, Mara AU - Karastoyanov, D. AU - Assenova, E. AU - Jakimovska, K. AU - Simeonov, S. AU - Vencl, Aleksandar PY - 2016 UR - https://machinery.mas.bg.ac.rs/handle/123456789/2437 AB - The paper considers a change in the coefficient of friction and the temperature distribution in the contact zone of the steel-bronze tribosystem. Investigations were carried out by the shaft-bushing system for three values of the load in the mixed-to-boundary lubrication regime with SAE 80W transmission oil without and with Valena additive. It is found that the additive presence in oil decreases the coefficient of friction by 11-21%, depending on the applied load. At the same time, the maximum decrease in the coefficient of friction is observed at a maximum applied load of 1500 N. PB - Pleiades Publishing Inc, Moscow T2 - Journal of Friction and Wear T1 - The influence of the valena metal-plating additive on tribotechnical characteristics of the Steel-Bronze tribological system EP - 190 IS - 2 SP - 187 VL - 37 DO - 10.3103/S1068366616020082 ER -
@article{ author = "Kandeva, Mara and Karastoyanov, D. and Assenova, E. and Jakimovska, K. and Simeonov, S. and Vencl, Aleksandar", year = "2016", abstract = "The paper considers a change in the coefficient of friction and the temperature distribution in the contact zone of the steel-bronze tribosystem. Investigations were carried out by the shaft-bushing system for three values of the load in the mixed-to-boundary lubrication regime with SAE 80W transmission oil without and with Valena additive. It is found that the additive presence in oil decreases the coefficient of friction by 11-21%, depending on the applied load. At the same time, the maximum decrease in the coefficient of friction is observed at a maximum applied load of 1500 N.", publisher = "Pleiades Publishing Inc, Moscow", journal = "Journal of Friction and Wear", title = "The influence of the valena metal-plating additive on tribotechnical characteristics of the Steel-Bronze tribological system", pages = "190-187", number = "2", volume = "37", doi = "10.3103/S1068366616020082" }
Kandeva, M., Karastoyanov, D., Assenova, E., Jakimovska, K., Simeonov, S.,& Vencl, A.. (2016). The influence of the valena metal-plating additive on tribotechnical characteristics of the Steel-Bronze tribological system. in Journal of Friction and Wear Pleiades Publishing Inc, Moscow., 37(2), 187-190. https://doi.org/10.3103/S1068366616020082
Kandeva M, Karastoyanov D, Assenova E, Jakimovska K, Simeonov S, Vencl A. The influence of the valena metal-plating additive on tribotechnical characteristics of the Steel-Bronze tribological system. in Journal of Friction and Wear. 2016;37(2):187-190. doi:10.3103/S1068366616020082 .
Kandeva, Mara, Karastoyanov, D., Assenova, E., Jakimovska, K., Simeonov, S., Vencl, Aleksandar, "The influence of the valena metal-plating additive on tribotechnical characteristics of the Steel-Bronze tribological system" in Journal of Friction and Wear, 37, no. 2 (2016):187-190, https://doi.org/10.3103/S1068366616020082 . .