Industrial cooling tower design and operation in the moderate-continental climate conditions
Апстракт
A large number of producers offer a wide choice of various types of industrial cooling towers. Usually, a proper choice of pre-fabricated cooling tower satisfies end-user needs. However, if there are specific end-user requirements, it is necessary to design cooling tower according to those requirements. For the adhesive factory located in southern region of Serbia, 350 kW mechanical draught wet cooling tower was designed and built. Dimensioning of the. cooling tower was done according to parameters of the ambient air, higher than the standard recommendations given in the literature. In this paper, the reasons for deviation from recommendations are given. The analysis of the cooling tower operation based on real meteorological parameters for 2015 is also shown in this paper. According to this analysis, cooling tower provides required water temperature in any season, and gives opportunity for energy savings in winter, with opportunity for heat capacity enlargement if production capacity ...is raised as it is planned in the factory.
Кључне речи:
cooling water / cooling tower / choice of design parameters / ambient airИзвор:
Thermal Science, 2016, 20, S1203-S1214Издавач:
- Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd
DOI: 10.2298/TSCI16S5203L
ISSN: 0354-9836
WoS: 000389964200003
Scopus: 2-s2.0-85012040924
Колекције
Институција/група
Mašinski fakultetTY - JOUR AU - Laković, Mirjana S. AU - Banjac, Miloš AU - Laković, Slobodan V. AU - Jović, Milica M. PY - 2016 UR - https://machinery.mas.bg.ac.rs/handle/123456789/2306 AB - A large number of producers offer a wide choice of various types of industrial cooling towers. Usually, a proper choice of pre-fabricated cooling tower satisfies end-user needs. However, if there are specific end-user requirements, it is necessary to design cooling tower according to those requirements. For the adhesive factory located in southern region of Serbia, 350 kW mechanical draught wet cooling tower was designed and built. Dimensioning of the. cooling tower was done according to parameters of the ambient air, higher than the standard recommendations given in the literature. In this paper, the reasons for deviation from recommendations are given. The analysis of the cooling tower operation based on real meteorological parameters for 2015 is also shown in this paper. According to this analysis, cooling tower provides required water temperature in any season, and gives opportunity for energy savings in winter, with opportunity for heat capacity enlargement if production capacity is raised as it is planned in the factory. PB - Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd T2 - Thermal Science T1 - Industrial cooling tower design and operation in the moderate-continental climate conditions EP - S1214 SP - S1203 VL - 20 DO - 10.2298/TSCI16S5203L ER -
@article{ author = "Laković, Mirjana S. and Banjac, Miloš and Laković, Slobodan V. and Jović, Milica M.", year = "2016", abstract = "A large number of producers offer a wide choice of various types of industrial cooling towers. Usually, a proper choice of pre-fabricated cooling tower satisfies end-user needs. However, if there are specific end-user requirements, it is necessary to design cooling tower according to those requirements. For the adhesive factory located in southern region of Serbia, 350 kW mechanical draught wet cooling tower was designed and built. Dimensioning of the. cooling tower was done according to parameters of the ambient air, higher than the standard recommendations given in the literature. In this paper, the reasons for deviation from recommendations are given. The analysis of the cooling tower operation based on real meteorological parameters for 2015 is also shown in this paper. According to this analysis, cooling tower provides required water temperature in any season, and gives opportunity for energy savings in winter, with opportunity for heat capacity enlargement if production capacity is raised as it is planned in the factory.", publisher = "Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd", journal = "Thermal Science", title = "Industrial cooling tower design and operation in the moderate-continental climate conditions", pages = "S1214-S1203", volume = "20", doi = "10.2298/TSCI16S5203L" }
Laković, M. S., Banjac, M., Laković, S. V.,& Jović, M. M.. (2016). Industrial cooling tower design and operation in the moderate-continental climate conditions. in Thermal Science Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd., 20, S1203-S1214. https://doi.org/10.2298/TSCI16S5203L
Laković MS, Banjac M, Laković SV, Jović MM. Industrial cooling tower design and operation in the moderate-continental climate conditions. in Thermal Science. 2016;20:S1203-S1214. doi:10.2298/TSCI16S5203L .
Laković, Mirjana S., Banjac, Miloš, Laković, Slobodan V., Jović, Milica M., "Industrial cooling tower design and operation in the moderate-continental climate conditions" in Thermal Science, 20 (2016):S1203-S1214, https://doi.org/10.2298/TSCI16S5203L . .