Influence of material velocity on heat generation during linear welding stage of friction stir welding
2016
Аутори
Murariu, AlinVeljić, Darko
Barjaktarević, Dragana R.
Rakin, Marko
Radović, Nenad A.
Sedmak, Aleksandar
Djoković, Jelena M.
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
The heat generated during friction stir welding process depends on plastic deformation of the material and friction between the tool and the material. In this work, heat generation is analysed with respect to the material velocity around the tool in Al alloy Al2024-T351 plate. The slip rate of the tool relative to the workpiece material is related to the frictional heat generated. The material velocity, on the other hand, is related to the heat generated by plastic deformation. During the welding process, the slippage is the most pronounced on the front part of the tool shoulder. Also, it is higher on the retreating side than on the advancing side. Slip rate in the zone around the tool pin has very low values, almost negligible. In this zone, the heat generation from friction is very low, because the material is in paste-like state and subjected to intensive plastic deformation. The material flow velocity around the pin is higher in the zone around the root of the pin. In the radial di...rection, this quantity increases from the pin to the periphery of the tool shoulder.
Кључне речи:
slip rate / numerical simulation / material velocity / heat generation / friction stir welding / equivalent plastic strainИзвор:
Thermal Science, 2016, 20, 5, 1693-1701Издавач:
- Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd
Финансирање / пројекти:
- Развој нових методологија ревитализације турбинске и хидромеханичке опреме хидроелектрана у зависности од узрока деградације материјала (RS-MESTD-Technological Development (TD or TR)-35002)
DOI: 10.2298/TSCI150904217M
ISSN: 0354-9836
WoS: 000387093300025
Scopus: 2-s2.0-85068456830
Институција/група
Inovacioni centarTY - JOUR AU - Murariu, Alin AU - Veljić, Darko AU - Barjaktarević, Dragana R. AU - Rakin, Marko AU - Radović, Nenad A. AU - Sedmak, Aleksandar AU - Djoković, Jelena M. PY - 2016 UR - https://machinery.mas.bg.ac.rs/handle/123456789/2300 AB - The heat generated during friction stir welding process depends on plastic deformation of the material and friction between the tool and the material. In this work, heat generation is analysed with respect to the material velocity around the tool in Al alloy Al2024-T351 plate. The slip rate of the tool relative to the workpiece material is related to the frictional heat generated. The material velocity, on the other hand, is related to the heat generated by plastic deformation. During the welding process, the slippage is the most pronounced on the front part of the tool shoulder. Also, it is higher on the retreating side than on the advancing side. Slip rate in the zone around the tool pin has very low values, almost negligible. In this zone, the heat generation from friction is very low, because the material is in paste-like state and subjected to intensive plastic deformation. The material flow velocity around the pin is higher in the zone around the root of the pin. In the radial direction, this quantity increases from the pin to the periphery of the tool shoulder. PB - Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd T2 - Thermal Science T1 - Influence of material velocity on heat generation during linear welding stage of friction stir welding EP - 1701 IS - 5 SP - 1693 VL - 20 DO - 10.2298/TSCI150904217M ER -
@article{ author = "Murariu, Alin and Veljić, Darko and Barjaktarević, Dragana R. and Rakin, Marko and Radović, Nenad A. and Sedmak, Aleksandar and Djoković, Jelena M.", year = "2016", abstract = "The heat generated during friction stir welding process depends on plastic deformation of the material and friction between the tool and the material. In this work, heat generation is analysed with respect to the material velocity around the tool in Al alloy Al2024-T351 plate. The slip rate of the tool relative to the workpiece material is related to the frictional heat generated. The material velocity, on the other hand, is related to the heat generated by plastic deformation. During the welding process, the slippage is the most pronounced on the front part of the tool shoulder. Also, it is higher on the retreating side than on the advancing side. Slip rate in the zone around the tool pin has very low values, almost negligible. In this zone, the heat generation from friction is very low, because the material is in paste-like state and subjected to intensive plastic deformation. The material flow velocity around the pin is higher in the zone around the root of the pin. In the radial direction, this quantity increases from the pin to the periphery of the tool shoulder.", publisher = "Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd", journal = "Thermal Science", title = "Influence of material velocity on heat generation during linear welding stage of friction stir welding", pages = "1701-1693", number = "5", volume = "20", doi = "10.2298/TSCI150904217M" }
Murariu, A., Veljić, D., Barjaktarević, D. R., Rakin, M., Radović, N. A., Sedmak, A.,& Djoković, J. M.. (2016). Influence of material velocity on heat generation during linear welding stage of friction stir welding. in Thermal Science Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd., 20(5), 1693-1701. https://doi.org/10.2298/TSCI150904217M
Murariu A, Veljić D, Barjaktarević DR, Rakin M, Radović NA, Sedmak A, Djoković JM. Influence of material velocity on heat generation during linear welding stage of friction stir welding. in Thermal Science. 2016;20(5):1693-1701. doi:10.2298/TSCI150904217M .
Murariu, Alin, Veljić, Darko, Barjaktarević, Dragana R., Rakin, Marko, Radović, Nenad A., Sedmak, Aleksandar, Djoković, Jelena M., "Influence of material velocity on heat generation during linear welding stage of friction stir welding" in Thermal Science, 20, no. 5 (2016):1693-1701, https://doi.org/10.2298/TSCI150904217M . .