The construction of capacitive voltage divide for measuring ultrafast pulse voltage
Само за регистроване кориснике
2015
Конференцијски прилог (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
The problem of pulse voltage measurements in the nanoseconds range has become of great importance with ongoing problems related to the construction of pulse fusion generators as well as with simulations of electromagnetic pulses related to the atmospheric nuclear explosion. Ultrafast pulses in the nanoseconds range can be measured by the capacitive voltage divider. The problem that arises with ultrafast voltage occurrence is inductivity. Under conditions of the nanoseconds pulse increaserate, conductors of about few centimeters should be regarded as inductivity. Therefore, capacitive divider can be treated as an equivalent RLC circuit. The ohmic resistance R in that equivalent circuit originates from the characteristic impedance (either 50 Ω or 75 Ω) and, depending on its design, it can introduce an additional parasite inductivity. The aim of this paper is to consider and analyze the constructive solutions of capacitive voltage divider for measuring ultrafast voltage occurrence.... Three types of capacitive divider will be constructed for that purpose. The high-voltage capacitor of each divider will be gas capacitor (in order to avoid both electrostatic and electrodynamic influence on measurement accuracy). The variations between divider types will be made for low-voltage capacitor. The designed low-voltage capacitors will be: 1-in the shape of 10 mica capacitors connected in a parallel with a discrete ending resistor of 50 Ω 2-in the form of gas trimmer capacitor with a discrete ending resistor of 50 Ω, and 3-the continual mica capacitor with waveguide resistor of 50 Ω (L=0). Ultrafast pulse response will be measured with dividers constructed in such manner, and will be compared with the corresponding response obtained from the numerical simulations.
Кључне речи:
Voltage measurement / Voltage control / Resistors / Electrodes / Distortion measurement / CapacitorsИзвор:
Digest of Technical Papers-IEEE International Pulsed Power Conference, 2015, 2015-OctoberИздавач:
- Institute of Electrical and Electronics Engineers Inc.
Финансирање / пројекти:
- Физички и функционални ефекти интеракције зрачења са електротехничким и биолошким системима (RS-MESTD-Basic Research (BR or ON)-171007)
Институција/група
Inovacioni centarTY - CONF AU - Kovačević, Uroš AU - Bajramović, Zijad AU - Jovanović, B. AU - Lazarević, D. AU - Djekić, S. PY - 2015 UR - https://machinery.mas.bg.ac.rs/handle/123456789/2189 AB - The problem of pulse voltage measurements in the nanoseconds range has become of great importance with ongoing problems related to the construction of pulse fusion generators as well as with simulations of electromagnetic pulses related to the atmospheric nuclear explosion. Ultrafast pulses in the nanoseconds range can be measured by the capacitive voltage divider. The problem that arises with ultrafast voltage occurrence is inductivity. Under conditions of the nanoseconds pulse increaserate, conductors of about few centimeters should be regarded as inductivity. Therefore, capacitive divider can be treated as an equivalent RLC circuit. The ohmic resistance R in that equivalent circuit originates from the characteristic impedance (either 50 Ω or 75 Ω) and, depending on its design, it can introduce an additional parasite inductivity. The aim of this paper is to consider and analyze the constructive solutions of capacitive voltage divider for measuring ultrafast voltage occurrence. Three types of capacitive divider will be constructed for that purpose. The high-voltage capacitor of each divider will be gas capacitor (in order to avoid both electrostatic and electrodynamic influence on measurement accuracy). The variations between divider types will be made for low-voltage capacitor. The designed low-voltage capacitors will be: 1-in the shape of 10 mica capacitors connected in a parallel with a discrete ending resistor of 50 Ω 2-in the form of gas trimmer capacitor with a discrete ending resistor of 50 Ω, and 3-the continual mica capacitor with waveguide resistor of 50 Ω (L=0). Ultrafast pulse response will be measured with dividers constructed in such manner, and will be compared with the corresponding response obtained from the numerical simulations. PB - Institute of Electrical and Electronics Engineers Inc. C3 - Digest of Technical Papers-IEEE International Pulsed Power Conference T1 - The construction of capacitive voltage divide for measuring ultrafast pulse voltage VL - 2015-October DO - 10.1109/PPC.2015.7296889 ER -
@conference{ author = "Kovačević, Uroš and Bajramović, Zijad and Jovanović, B. and Lazarević, D. and Djekić, S.", year = "2015", abstract = "The problem of pulse voltage measurements in the nanoseconds range has become of great importance with ongoing problems related to the construction of pulse fusion generators as well as with simulations of electromagnetic pulses related to the atmospheric nuclear explosion. Ultrafast pulses in the nanoseconds range can be measured by the capacitive voltage divider. The problem that arises with ultrafast voltage occurrence is inductivity. Under conditions of the nanoseconds pulse increaserate, conductors of about few centimeters should be regarded as inductivity. Therefore, capacitive divider can be treated as an equivalent RLC circuit. The ohmic resistance R in that equivalent circuit originates from the characteristic impedance (either 50 Ω or 75 Ω) and, depending on its design, it can introduce an additional parasite inductivity. The aim of this paper is to consider and analyze the constructive solutions of capacitive voltage divider for measuring ultrafast voltage occurrence. Three types of capacitive divider will be constructed for that purpose. The high-voltage capacitor of each divider will be gas capacitor (in order to avoid both electrostatic and electrodynamic influence on measurement accuracy). The variations between divider types will be made for low-voltage capacitor. The designed low-voltage capacitors will be: 1-in the shape of 10 mica capacitors connected in a parallel with a discrete ending resistor of 50 Ω 2-in the form of gas trimmer capacitor with a discrete ending resistor of 50 Ω, and 3-the continual mica capacitor with waveguide resistor of 50 Ω (L=0). Ultrafast pulse response will be measured with dividers constructed in such manner, and will be compared with the corresponding response obtained from the numerical simulations.", publisher = "Institute of Electrical and Electronics Engineers Inc.", journal = "Digest of Technical Papers-IEEE International Pulsed Power Conference", title = "The construction of capacitive voltage divide for measuring ultrafast pulse voltage", volume = "2015-October", doi = "10.1109/PPC.2015.7296889" }
Kovačević, U., Bajramović, Z., Jovanović, B., Lazarević, D.,& Djekić, S.. (2015). The construction of capacitive voltage divide for measuring ultrafast pulse voltage. in Digest of Technical Papers-IEEE International Pulsed Power Conference Institute of Electrical and Electronics Engineers Inc.., 2015-October. https://doi.org/10.1109/PPC.2015.7296889
Kovačević U, Bajramović Z, Jovanović B, Lazarević D, Djekić S. The construction of capacitive voltage divide for measuring ultrafast pulse voltage. in Digest of Technical Papers-IEEE International Pulsed Power Conference. 2015;2015-October. doi:10.1109/PPC.2015.7296889 .
Kovačević, Uroš, Bajramović, Zijad, Jovanović, B., Lazarević, D., Djekić, S., "The construction of capacitive voltage divide for measuring ultrafast pulse voltage" in Digest of Technical Papers-IEEE International Pulsed Power Conference, 2015-October (2015), https://doi.org/10.1109/PPC.2015.7296889 . .