Influence of friction stir welding parameters on properties of 2024 t3 aluminium alloy joints
2014
Аутори
Eramah, Abdsalam M.Rakin, Marko
Veljić, Darko
Tadić, Srđan
Radović, Nenad A.
Zrilić, Milorad
Perović, Milenko M.
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
The aim of this work is to analyse the process of friction stir welding (FSW) of 3 mm thick aluminium plates made of high strength aluminium alloy - 2024 T3, as well as to assess the mechanical properties of the produced joints. Friction Stir Welding is a modern procedure which enables joining of similar and dissimilar materials in the solid state, by the combined action of heat and mechanical work. This paper presents an analysis of the experimental results obtained by testing the butt welded joints. Tensile strength of the produced joints is assessed, as well as the distribution of hardness, micro-and macrostructure through the joints (in the base material, nugget, heat affected zone and thermo-mechanically affected zone). Different combinations of the tool rotation speed and the welding speed are used, and the dependence of the properties of the joints on these parameters of welding technology is determined.
Кључне речи:
welding speed / welding parameters / welded joint properties / rotation speed / friction stir welding / 2024 aluminium alloyИзвор:
Thermal Science, 2014, 18, S21-S28Издавач:
- Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd
Финансирање / пројекти:
- Развој технологије производње и заваривања Ал-Мг легура високе чврстоће за примену у конструкцијама друмских и железничких транспортних средстава (RS-MESTD-Technological Development (TD or TR)-34018)
- Одрживост и унапређење машинских система у енергетици и транспорту применом форензичког инжењерства, еко и робуст дизајна (RS-MESTD-Technological Development (TD or TR)-35006)
DOI: 10.2298/TSCI130307170E
ISSN: 0354-9836
WoS: 000338690200004
Scopus: 2-s2.0-84907061101
Институција/група
Inovacioni centarTY - JOUR AU - Eramah, Abdsalam M. AU - Rakin, Marko AU - Veljić, Darko AU - Tadić, Srđan AU - Radović, Nenad A. AU - Zrilić, Milorad AU - Perović, Milenko M. PY - 2014 UR - https://machinery.mas.bg.ac.rs/handle/123456789/2021 AB - The aim of this work is to analyse the process of friction stir welding (FSW) of 3 mm thick aluminium plates made of high strength aluminium alloy - 2024 T3, as well as to assess the mechanical properties of the produced joints. Friction Stir Welding is a modern procedure which enables joining of similar and dissimilar materials in the solid state, by the combined action of heat and mechanical work. This paper presents an analysis of the experimental results obtained by testing the butt welded joints. Tensile strength of the produced joints is assessed, as well as the distribution of hardness, micro-and macrostructure through the joints (in the base material, nugget, heat affected zone and thermo-mechanically affected zone). Different combinations of the tool rotation speed and the welding speed are used, and the dependence of the properties of the joints on these parameters of welding technology is determined. PB - Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd T2 - Thermal Science T1 - Influence of friction stir welding parameters on properties of 2024 t3 aluminium alloy joints EP - S28 SP - S21 VL - 18 DO - 10.2298/TSCI130307170E ER -
@article{ author = "Eramah, Abdsalam M. and Rakin, Marko and Veljić, Darko and Tadić, Srđan and Radović, Nenad A. and Zrilić, Milorad and Perović, Milenko M.", year = "2014", abstract = "The aim of this work is to analyse the process of friction stir welding (FSW) of 3 mm thick aluminium plates made of high strength aluminium alloy - 2024 T3, as well as to assess the mechanical properties of the produced joints. Friction Stir Welding is a modern procedure which enables joining of similar and dissimilar materials in the solid state, by the combined action of heat and mechanical work. This paper presents an analysis of the experimental results obtained by testing the butt welded joints. Tensile strength of the produced joints is assessed, as well as the distribution of hardness, micro-and macrostructure through the joints (in the base material, nugget, heat affected zone and thermo-mechanically affected zone). Different combinations of the tool rotation speed and the welding speed are used, and the dependence of the properties of the joints on these parameters of welding technology is determined.", publisher = "Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd", journal = "Thermal Science", title = "Influence of friction stir welding parameters on properties of 2024 t3 aluminium alloy joints", pages = "S28-S21", volume = "18", doi = "10.2298/TSCI130307170E" }
Eramah, A. M., Rakin, M., Veljić, D., Tadić, S., Radović, N. A., Zrilić, M.,& Perović, M. M.. (2014). Influence of friction stir welding parameters on properties of 2024 t3 aluminium alloy joints. in Thermal Science Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd., 18, S21-S28. https://doi.org/10.2298/TSCI130307170E
Eramah AM, Rakin M, Veljić D, Tadić S, Radović NA, Zrilić M, Perović MM. Influence of friction stir welding parameters on properties of 2024 t3 aluminium alloy joints. in Thermal Science. 2014;18:S21-S28. doi:10.2298/TSCI130307170E .
Eramah, Abdsalam M., Rakin, Marko, Veljić, Darko, Tadić, Srđan, Radović, Nenad A., Zrilić, Milorad, Perović, Milenko M., "Influence of friction stir welding parameters on properties of 2024 t3 aluminium alloy joints" in Thermal Science, 18 (2014):S21-S28, https://doi.org/10.2298/TSCI130307170E . .