Analysis of deep groove ball bearing design for assembly
Samo za registrovane korisnike
2013
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
This paper presents a comprehensive analysis of the assembly processes for single-row ball bearings. There are two different types of assembly processes, which depend on ball numbers and ball bearing ring designs. In the case of deep groove ball bearings, assembly is usually undertaken through slight deformation of the outer ring to increase clearance for insertion of the final ball. As a result, the outer ring takes an elliptical instead of a circular shape and requires deformation to be below a critical level to avoid fracture. Causal analysis of outer ring fracture during assembly is the main goal of the presented analysis, based on the expressions of the Theory of Elasticity for the thin ring exposed to bending, as well as Finite Element Analysis (FEA). The theoretical and numerical results have been verified by experimental testing.
Ključne reči:
Theory of elasticity / Finite element analysis / Deep groove ball bearing / AssemblyIzvor:
Advanced Materials Research, 2013, 633, 77-86Izdavač:
- Trans Tech Publications Ltd
Finansiranje / projekti:
- Razvoj metodologija za povećanje radne sposobnosti, pouzdanosti i energetske efikasnosti mašinskih sistema u energetici (RS-MESTD-Technological Development (TD or TR)-35029)
DOI: 10.4028/www.scientific.net/AMR.633.77
ISSN: 1022-6680
Scopus: 2-s2.0-84873038746
Kolekcije
Institucija/grupa
Mašinski fakultetTY - JOUR AU - Mitrović, Radivoje AU - Subić, Aleksandar AU - Atanasovska, Ivana PY - 2013 UR - https://machinery.mas.bg.ac.rs/handle/123456789/1822 AB - This paper presents a comprehensive analysis of the assembly processes for single-row ball bearings. There are two different types of assembly processes, which depend on ball numbers and ball bearing ring designs. In the case of deep groove ball bearings, assembly is usually undertaken through slight deformation of the outer ring to increase clearance for insertion of the final ball. As a result, the outer ring takes an elliptical instead of a circular shape and requires deformation to be below a critical level to avoid fracture. Causal analysis of outer ring fracture during assembly is the main goal of the presented analysis, based on the expressions of the Theory of Elasticity for the thin ring exposed to bending, as well as Finite Element Analysis (FEA). The theoretical and numerical results have been verified by experimental testing. PB - Trans Tech Publications Ltd T2 - Advanced Materials Research T1 - Analysis of deep groove ball bearing design for assembly EP - 86 SP - 77 VL - 633 DO - 10.4028/www.scientific.net/AMR.633.77 ER -
@article{ author = "Mitrović, Radivoje and Subić, Aleksandar and Atanasovska, Ivana", year = "2013", abstract = "This paper presents a comprehensive analysis of the assembly processes for single-row ball bearings. There are two different types of assembly processes, which depend on ball numbers and ball bearing ring designs. In the case of deep groove ball bearings, assembly is usually undertaken through slight deformation of the outer ring to increase clearance for insertion of the final ball. As a result, the outer ring takes an elliptical instead of a circular shape and requires deformation to be below a critical level to avoid fracture. Causal analysis of outer ring fracture during assembly is the main goal of the presented analysis, based on the expressions of the Theory of Elasticity for the thin ring exposed to bending, as well as Finite Element Analysis (FEA). The theoretical and numerical results have been verified by experimental testing.", publisher = "Trans Tech Publications Ltd", journal = "Advanced Materials Research", title = "Analysis of deep groove ball bearing design for assembly", pages = "86-77", volume = "633", doi = "10.4028/www.scientific.net/AMR.633.77" }
Mitrović, R., Subić, A.,& Atanasovska, I.. (2013). Analysis of deep groove ball bearing design for assembly. in Advanced Materials Research Trans Tech Publications Ltd., 633, 77-86. https://doi.org/10.4028/www.scientific.net/AMR.633.77
Mitrović R, Subić A, Atanasovska I. Analysis of deep groove ball bearing design for assembly. in Advanced Materials Research. 2013;633:77-86. doi:10.4028/www.scientific.net/AMR.633.77 .
Mitrović, Radivoje, Subić, Aleksandar, Atanasovska, Ivana, "Analysis of deep groove ball bearing design for assembly" in Advanced Materials Research, 633 (2013):77-86, https://doi.org/10.4028/www.scientific.net/AMR.633.77 . .