Heat generation during plunge stage in friction stir welding
2013
Autori
Veljić, DarkoRakin, Marko
Perović, Milenko M.
Međo, Bojan
Radaković, Zoran
Todorović, Petar
Pavišić, Mirko N.
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
This paper deals with the heat generation in the Al alloy Al2024-T3 plate under different rotating speeds and plunge speeds during the plunge stage of friction stir welding. A 3-D finite element model is developed in the commercial code ABAQUS/Explicit using the arbitrary Lagrangian-Eulerian formulation, the Johnson- Cook material law, and Coulomb’s Law of friction. The heat generation in friction stir welding can be divided into two parts: frictional heat generated by the tool and heat generated by material deformation near the pin and the tool shoulder region. Numerical results obtained in this work indicate a more prominent influence from the friction-generated heat. The slip rate of the tool relative to the workpiece material is related to this portion of heat. The material velocity, on the other hand, is related to the heat generated by plastic deformation. Increasing the plunging speed of the tool decreases the friction-generated heat and increases the amount of deformation-gener...ated heat, while increasing the tool rotating speed has the opposite influence on both heat portions. Numerical results are compared with the experimental ones, in order to validate the numerical model, and a good agreement is obtained.
Ključne reči:
temperature fields / slip rate / plastic strain / numerical simulation / heat generation / friction / friction stir weldingIzvor:
Thermal Science, 2013, 17, 2, 489-496Izdavač:
- Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd
Finansiranje / projekti:
- Razvoj tehnologije proizvodnje i zavarivanja Al-Mg legura visoke čvrstoće za primenu u konstrukcijama drumskih i železničkih transportnih sredstava (RS-MESTD-Technological Development (TD or TR)-34018)
- Razvoj tehnologije izrade obloge i jezgra na bazi domaćih sirovina za proizvodnju specijalnih obloženih elektroda namenjenih za elektrolučno zavarivanje čelika (RS-MESTD-Technological Development (TD or TR)-34016)
- Održivost i unapređenje mašinskih sistema u energetici i transportu primenom forenzičkog inženjerstva, eko i robust dizajna (RS-MESTD-Technological Development (TD or TR)-35006)
DOI: 10.2298/TSCI120301205V
ISSN: 0354-9836
WoS: 000319301200016
Scopus: 2-s2.0-84881110967
Kolekcije
Institucija/grupa
Mašinski fakultetTY - JOUR AU - Veljić, Darko AU - Rakin, Marko AU - Perović, Milenko M. AU - Međo, Bojan AU - Radaković, Zoran AU - Todorović, Petar AU - Pavišić, Mirko N. PY - 2013 UR - https://machinery.mas.bg.ac.rs/handle/123456789/1666 AB - This paper deals with the heat generation in the Al alloy Al2024-T3 plate under different rotating speeds and plunge speeds during the plunge stage of friction stir welding. A 3-D finite element model is developed in the commercial code ABAQUS/Explicit using the arbitrary Lagrangian-Eulerian formulation, the Johnson- Cook material law, and Coulomb’s Law of friction. The heat generation in friction stir welding can be divided into two parts: frictional heat generated by the tool and heat generated by material deformation near the pin and the tool shoulder region. Numerical results obtained in this work indicate a more prominent influence from the friction-generated heat. The slip rate of the tool relative to the workpiece material is related to this portion of heat. The material velocity, on the other hand, is related to the heat generated by plastic deformation. Increasing the plunging speed of the tool decreases the friction-generated heat and increases the amount of deformation-generated heat, while increasing the tool rotating speed has the opposite influence on both heat portions. Numerical results are compared with the experimental ones, in order to validate the numerical model, and a good agreement is obtained. PB - Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd T2 - Thermal Science T1 - Heat generation during plunge stage in friction stir welding EP - 496 IS - 2 SP - 489 VL - 17 DO - 10.2298/TSCI120301205V ER -
@article{ author = "Veljić, Darko and Rakin, Marko and Perović, Milenko M. and Međo, Bojan and Radaković, Zoran and Todorović, Petar and Pavišić, Mirko N.", year = "2013", abstract = "This paper deals with the heat generation in the Al alloy Al2024-T3 plate under different rotating speeds and plunge speeds during the plunge stage of friction stir welding. A 3-D finite element model is developed in the commercial code ABAQUS/Explicit using the arbitrary Lagrangian-Eulerian formulation, the Johnson- Cook material law, and Coulomb’s Law of friction. The heat generation in friction stir welding can be divided into two parts: frictional heat generated by the tool and heat generated by material deformation near the pin and the tool shoulder region. Numerical results obtained in this work indicate a more prominent influence from the friction-generated heat. The slip rate of the tool relative to the workpiece material is related to this portion of heat. The material velocity, on the other hand, is related to the heat generated by plastic deformation. Increasing the plunging speed of the tool decreases the friction-generated heat and increases the amount of deformation-generated heat, while increasing the tool rotating speed has the opposite influence on both heat portions. Numerical results are compared with the experimental ones, in order to validate the numerical model, and a good agreement is obtained.", publisher = "Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd", journal = "Thermal Science", title = "Heat generation during plunge stage in friction stir welding", pages = "496-489", number = "2", volume = "17", doi = "10.2298/TSCI120301205V" }
Veljić, D., Rakin, M., Perović, M. M., Međo, B., Radaković, Z., Todorović, P.,& Pavišić, M. N.. (2013). Heat generation during plunge stage in friction stir welding. in Thermal Science Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd., 17(2), 489-496. https://doi.org/10.2298/TSCI120301205V
Veljić D, Rakin M, Perović MM, Međo B, Radaković Z, Todorović P, Pavišić MN. Heat generation during plunge stage in friction stir welding. in Thermal Science. 2013;17(2):489-496. doi:10.2298/TSCI120301205V .
Veljić, Darko, Rakin, Marko, Perović, Milenko M., Međo, Bojan, Radaković, Zoran, Todorović, Petar, Pavišić, Mirko N., "Heat generation during plunge stage in friction stir welding" in Thermal Science, 17, no. 2 (2013):489-496, https://doi.org/10.2298/TSCI120301205V . .