Verifikacija čvrstoće samonosećeg ADR rezervoara poluprikolice
Strength verification of semi-trailer's self-supporting ADR tank body
Apstrakt
Problematika rada odnosi se na distribuciju opterećenja kroz zonu oslanjanja rezervoara. U radu se potencira značaj uticaja koji konstrukcija oslonih jastuka rezervoara, odnosno interakcija sa donjim postrojem cisterne ima na njegovo ponašanje i pouzdanost. U radu je razmatrano aktuelno stanje, uz komentar zahteva i kriterijuma koji normativno regulišu ovaj segment. Osnovni cilj rada je da ukaže na nedoslednost i nepreciznost aktuelne regulative i ponudi način za prevazilaženje uočenih problema primeren stanju tehnike u segmentu identifikacije ponašanja i verifikacije konstrukcija sa stanovišta čvrstoće. U ovom smislu predstavljena je konkretna primena razvijenog metodološkog prilaza na primeru specifičnog rešenja oslanjanja samonosećeg ADR rezervoara poluprikolice cisterne u zoni vučnog čepa, uz ilustrativno predstavljanje proračunskih odziva karakterističnih varijanti i režima opterećenja, uključujući sva potrebna pojašnjenja i komentare dobijenih rezultata.
This paper analyzes load distribution throughout the tank body suspension zone. It points out the importance of influence that the design of the link between the tank wall and the base of the tank vehicle (suspension cushion zone) has on the structure behaviour and reliability. In this study, the current state is considered, giving comments on the requirements and the criteria which make a normative regulation of this segment. The basic purpose of this study is to point out the inconsistency and inaccuracy of current regulations as well as to offer a technically adequate way of resolving the stated problems in the segment of identification of behaviour and verification of construction from the strength point of view. In addition, we have illustrated how a developed methodological approach has been applied to a particular model of self-supporting ADR tank body of semi-trailers in the fifth wheel coupling pin zone, including the characteristic graphic presentation of carried out calculat...ions and necessary explanation and comments.
Ključne reči:
support structure optimization / numerical prototyping / ADR tank body suspensionIzvor:
FME Transactions, 2012, 40, 1, 25-30Izdavač:
- Univerzitet u Beogradu - Mašinski fakultet, Beograd
Finansiranje / projekti:
- Naučno-tehnološka podrška unapređenju bezbednosti specijalnih drumskih i šinskih vozila (RS-MESTD-Technological Development (TD or TR)-35045)
- Razvoj savremenih metoda dijagnostike i ispitivanja mašinskih struktura (RS-MESTD-Technological Development (TD or TR)-35040)
Kolekcije
Institucija/grupa
Mašinski fakultetTY - JOUR AU - Rakićević, Branislav AU - Mitić, Saša AU - Popović, Vladimir AU - Vorotović, Goran AU - Radivojević, Jovan D. PY - 2012 UR - https://machinery.mas.bg.ac.rs/handle/123456789/1577 AB - Problematika rada odnosi se na distribuciju opterećenja kroz zonu oslanjanja rezervoara. U radu se potencira značaj uticaja koji konstrukcija oslonih jastuka rezervoara, odnosno interakcija sa donjim postrojem cisterne ima na njegovo ponašanje i pouzdanost. U radu je razmatrano aktuelno stanje, uz komentar zahteva i kriterijuma koji normativno regulišu ovaj segment. Osnovni cilj rada je da ukaže na nedoslednost i nepreciznost aktuelne regulative i ponudi način za prevazilaženje uočenih problema primeren stanju tehnike u segmentu identifikacije ponašanja i verifikacije konstrukcija sa stanovišta čvrstoće. U ovom smislu predstavljena je konkretna primena razvijenog metodološkog prilaza na primeru specifičnog rešenja oslanjanja samonosećeg ADR rezervoara poluprikolice cisterne u zoni vučnog čepa, uz ilustrativno predstavljanje proračunskih odziva karakterističnih varijanti i režima opterećenja, uključujući sva potrebna pojašnjenja i komentare dobijenih rezultata. AB - This paper analyzes load distribution throughout the tank body suspension zone. It points out the importance of influence that the design of the link between the tank wall and the base of the tank vehicle (suspension cushion zone) has on the structure behaviour and reliability. In this study, the current state is considered, giving comments on the requirements and the criteria which make a normative regulation of this segment. The basic purpose of this study is to point out the inconsistency and inaccuracy of current regulations as well as to offer a technically adequate way of resolving the stated problems in the segment of identification of behaviour and verification of construction from the strength point of view. In addition, we have illustrated how a developed methodological approach has been applied to a particular model of self-supporting ADR tank body of semi-trailers in the fifth wheel coupling pin zone, including the characteristic graphic presentation of carried out calculations and necessary explanation and comments. PB - Univerzitet u Beogradu - Mašinski fakultet, Beograd T2 - FME Transactions T1 - Verifikacija čvrstoće samonosećeg ADR rezervoara poluprikolice T1 - Strength verification of semi-trailer's self-supporting ADR tank body EP - 30 IS - 1 SP - 25 VL - 40 UR - https://hdl.handle.net/21.15107/rcub_machinery_1577 ER -
@article{ author = "Rakićević, Branislav and Mitić, Saša and Popović, Vladimir and Vorotović, Goran and Radivojević, Jovan D.", year = "2012", abstract = "Problematika rada odnosi se na distribuciju opterećenja kroz zonu oslanjanja rezervoara. U radu se potencira značaj uticaja koji konstrukcija oslonih jastuka rezervoara, odnosno interakcija sa donjim postrojem cisterne ima na njegovo ponašanje i pouzdanost. U radu je razmatrano aktuelno stanje, uz komentar zahteva i kriterijuma koji normativno regulišu ovaj segment. Osnovni cilj rada je da ukaže na nedoslednost i nepreciznost aktuelne regulative i ponudi način za prevazilaženje uočenih problema primeren stanju tehnike u segmentu identifikacije ponašanja i verifikacije konstrukcija sa stanovišta čvrstoće. U ovom smislu predstavljena je konkretna primena razvijenog metodološkog prilaza na primeru specifičnog rešenja oslanjanja samonosećeg ADR rezervoara poluprikolice cisterne u zoni vučnog čepa, uz ilustrativno predstavljanje proračunskih odziva karakterističnih varijanti i režima opterećenja, uključujući sva potrebna pojašnjenja i komentare dobijenih rezultata., This paper analyzes load distribution throughout the tank body suspension zone. It points out the importance of influence that the design of the link between the tank wall and the base of the tank vehicle (suspension cushion zone) has on the structure behaviour and reliability. In this study, the current state is considered, giving comments on the requirements and the criteria which make a normative regulation of this segment. The basic purpose of this study is to point out the inconsistency and inaccuracy of current regulations as well as to offer a technically adequate way of resolving the stated problems in the segment of identification of behaviour and verification of construction from the strength point of view. In addition, we have illustrated how a developed methodological approach has been applied to a particular model of self-supporting ADR tank body of semi-trailers in the fifth wheel coupling pin zone, including the characteristic graphic presentation of carried out calculations and necessary explanation and comments.", publisher = "Univerzitet u Beogradu - Mašinski fakultet, Beograd", journal = "FME Transactions", title = "Verifikacija čvrstoće samonosećeg ADR rezervoara poluprikolice, Strength verification of semi-trailer's self-supporting ADR tank body", pages = "30-25", number = "1", volume = "40", url = "https://hdl.handle.net/21.15107/rcub_machinery_1577" }
Rakićević, B., Mitić, S., Popović, V., Vorotović, G.,& Radivojević, J. D.. (2012). Verifikacija čvrstoće samonosećeg ADR rezervoara poluprikolice. in FME Transactions Univerzitet u Beogradu - Mašinski fakultet, Beograd., 40(1), 25-30. https://hdl.handle.net/21.15107/rcub_machinery_1577
Rakićević B, Mitić S, Popović V, Vorotović G, Radivojević JD. Verifikacija čvrstoće samonosećeg ADR rezervoara poluprikolice. in FME Transactions. 2012;40(1):25-30. https://hdl.handle.net/21.15107/rcub_machinery_1577 .
Rakićević, Branislav, Mitić, Saša, Popović, Vladimir, Vorotović, Goran, Radivojević, Jovan D., "Verifikacija čvrstoće samonosećeg ADR rezervoara poluprikolice" in FME Transactions, 40, no. 1 (2012):25-30, https://hdl.handle.net/21.15107/rcub_machinery_1577 .