3-D model of solid and gas phase flow in the duct bend behind the mill gas classifier at the fan mill
Нема приказа
Аутори
Stupar, GoranTucaković, Dragan
Živanović, Titoslav
Ivanović, V.
Zivanović, V.
Komarov, Dragan
Конференцијски прилог (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
This paper shows the computer simulation of two-phase flow of the mill gases, the solid particles of monodisperse coal dust and the transport fluid. Numeric simulation was performed with the software pack Fluent 6.3.26, application of the internal method DPM (Discrete Phase Models) which is based on the Lagrange approach. The standard k-ε model was used for gas phase turbulence modeling.The simulation was done for smooth, rectangular 90 o bend of inclined mill gas duct, located behind the classifier, for fan mill N 80.75 in block 1 of the thermal power plant "Kostolac A" (Serbia), with the aim of determining the pulverized coal distribution on duct cross section before entering the jet burner. Obtained results show the transport fluid velocity, the pulverized coal velocity and the particle trajectories within the flow channel. The simulation covers the flow of monodisperse particles with diameters ds = 50 μm, ds = 100 μm, ds = 600 μm and ds = 1000 μm, and their mixture. The results of ...this work were verified against experimental results available in the literature. Mill gas classifier in the TPP "Kostolac A" was reconstructed based on the analysis of numerical results.
Кључне речи:
Two-phase flow / Solid particles / Mill gases / Mill gas duct / Computer simulationИзвор:
Proceedings of the 24th International Conference on Efficiency, Cost, Optimization, Simulation and E, 2011, 786-797Издавач:
- Nis University
Scopus: 2-s2.0-84903640648
Институција/група
Inovacioni centarTY - CONF AU - Stupar, Goran AU - Tucaković, Dragan AU - Živanović, Titoslav AU - Ivanović, V. AU - Zivanović, V. AU - Komarov, Dragan PY - 2011 UR - https://machinery.mas.bg.ac.rs/handle/123456789/1291 AB - This paper shows the computer simulation of two-phase flow of the mill gases, the solid particles of monodisperse coal dust and the transport fluid. Numeric simulation was performed with the software pack Fluent 6.3.26, application of the internal method DPM (Discrete Phase Models) which is based on the Lagrange approach. The standard k-ε model was used for gas phase turbulence modeling.The simulation was done for smooth, rectangular 90 o bend of inclined mill gas duct, located behind the classifier, for fan mill N 80.75 in block 1 of the thermal power plant "Kostolac A" (Serbia), with the aim of determining the pulverized coal distribution on duct cross section before entering the jet burner. Obtained results show the transport fluid velocity, the pulverized coal velocity and the particle trajectories within the flow channel. The simulation covers the flow of monodisperse particles with diameters ds = 50 μm, ds = 100 μm, ds = 600 μm and ds = 1000 μm, and their mixture. The results of this work were verified against experimental results available in the literature. Mill gas classifier in the TPP "Kostolac A" was reconstructed based on the analysis of numerical results. PB - Nis University C3 - Proceedings of the 24th International Conference on Efficiency, Cost, Optimization, Simulation and E T1 - 3-D model of solid and gas phase flow in the duct bend behind the mill gas classifier at the fan mill EP - 797 SP - 786 UR - https://hdl.handle.net/21.15107/rcub_machinery_1291 ER -
@conference{ author = "Stupar, Goran and Tucaković, Dragan and Živanović, Titoslav and Ivanović, V. and Zivanović, V. and Komarov, Dragan", year = "2011", abstract = "This paper shows the computer simulation of two-phase flow of the mill gases, the solid particles of monodisperse coal dust and the transport fluid. Numeric simulation was performed with the software pack Fluent 6.3.26, application of the internal method DPM (Discrete Phase Models) which is based on the Lagrange approach. The standard k-ε model was used for gas phase turbulence modeling.The simulation was done for smooth, rectangular 90 o bend of inclined mill gas duct, located behind the classifier, for fan mill N 80.75 in block 1 of the thermal power plant "Kostolac A" (Serbia), with the aim of determining the pulverized coal distribution on duct cross section before entering the jet burner. Obtained results show the transport fluid velocity, the pulverized coal velocity and the particle trajectories within the flow channel. The simulation covers the flow of monodisperse particles with diameters ds = 50 μm, ds = 100 μm, ds = 600 μm and ds = 1000 μm, and their mixture. The results of this work were verified against experimental results available in the literature. Mill gas classifier in the TPP "Kostolac A" was reconstructed based on the analysis of numerical results.", publisher = "Nis University", journal = "Proceedings of the 24th International Conference on Efficiency, Cost, Optimization, Simulation and E", title = "3-D model of solid and gas phase flow in the duct bend behind the mill gas classifier at the fan mill", pages = "797-786", url = "https://hdl.handle.net/21.15107/rcub_machinery_1291" }
Stupar, G., Tucaković, D., Živanović, T., Ivanović, V., Zivanović, V.,& Komarov, D.. (2011). 3-D model of solid and gas phase flow in the duct bend behind the mill gas classifier at the fan mill. in Proceedings of the 24th International Conference on Efficiency, Cost, Optimization, Simulation and E Nis University., 786-797. https://hdl.handle.net/21.15107/rcub_machinery_1291
Stupar G, Tucaković D, Živanović T, Ivanović V, Zivanović V, Komarov D. 3-D model of solid and gas phase flow in the duct bend behind the mill gas classifier at the fan mill. in Proceedings of the 24th International Conference on Efficiency, Cost, Optimization, Simulation and E. 2011;:786-797. https://hdl.handle.net/21.15107/rcub_machinery_1291 .
Stupar, Goran, Tucaković, Dragan, Živanović, Titoslav, Ivanović, V., Zivanović, V., Komarov, Dragan, "3-D model of solid and gas phase flow in the duct bend behind the mill gas classifier at the fan mill" in Proceedings of the 24th International Conference on Efficiency, Cost, Optimization, Simulation and E (2011):786-797, https://hdl.handle.net/21.15107/rcub_machinery_1291 .