Sintering of Mechanically Activated Magnesium-titanate and Barium-zinc-titanate Ceramics
2011
Autori
Obradović, NinaFilipović, Suzana
Pavlović, Vladimir B.
Maričić, Aleksa
Mitrović, N.
Balać, Igor
Ristić, Momčilo M.
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
In this article the influence of mechanical activation on sintering process of magnesium-titanate and barium-zinc-titanate ceramics has been investigated. Both non-activated and mixtures treated in planetary ball mill for 80 minutes were sintered at 1100 degrees C and 1300 degrees C. The influence of mechanical activation on phase composition and crystal structure has been analyzed by XRD, while the effect of activation and sintering process on microstructure was investigated by scanning electron microscopy. It has been established that temperature of 1100 degrees C was to low to induce final sintering stage for both systems. Moreover, we concluded that barium-zinc-titanate ceramics exhibited better sinterability than magnesium-titanate ceramics.
Ključne reči:
Sintering / SEM / Mechanochemical processing / CeramicsIzvor:
Science of Sintering, 2011, 43, 2, 145-151Izdavač:
- Međunarodni Institut za nauku o sinterovanju, Beograd
Finansiranje / projekti:
- Serbian Academy of Sciences and Arts
- Usmerena sinteza, struktura i svojstva multifunkcionalnih materijala (RS-MESTD-Basic Research (BR or ON)-172057)
- Sinteza, razvoj tehnologija dobijanja i primena nanostrukturnih multifunkcionalnih materijala definisanih svojstava (RS-MESTD-Integrated and Interdisciplinary Research (IIR or III)-45019)
DOI: 10.2298/SOS1102145O
ISSN: 0350-820X
WoS: 000296942600004
Scopus: 2-s2.0-80054101317
Kolekcije
Institucija/grupa
Mašinski fakultetTY - JOUR AU - Obradović, Nina AU - Filipović, Suzana AU - Pavlović, Vladimir B. AU - Maričić, Aleksa AU - Mitrović, N. AU - Balać, Igor AU - Ristić, Momčilo M. PY - 2011 UR - https://machinery.mas.bg.ac.rs/handle/123456789/1166 AB - In this article the influence of mechanical activation on sintering process of magnesium-titanate and barium-zinc-titanate ceramics has been investigated. Both non-activated and mixtures treated in planetary ball mill for 80 minutes were sintered at 1100 degrees C and 1300 degrees C. The influence of mechanical activation on phase composition and crystal structure has been analyzed by XRD, while the effect of activation and sintering process on microstructure was investigated by scanning electron microscopy. It has been established that temperature of 1100 degrees C was to low to induce final sintering stage for both systems. Moreover, we concluded that barium-zinc-titanate ceramics exhibited better sinterability than magnesium-titanate ceramics. PB - Međunarodni Institut za nauku o sinterovanju, Beograd T2 - Science of Sintering T1 - Sintering of Mechanically Activated Magnesium-titanate and Barium-zinc-titanate Ceramics EP - 151 IS - 2 SP - 145 VL - 43 DO - 10.2298/SOS1102145O ER -
@article{ author = "Obradović, Nina and Filipović, Suzana and Pavlović, Vladimir B. and Maričić, Aleksa and Mitrović, N. and Balać, Igor and Ristić, Momčilo M.", year = "2011", abstract = "In this article the influence of mechanical activation on sintering process of magnesium-titanate and barium-zinc-titanate ceramics has been investigated. Both non-activated and mixtures treated in planetary ball mill for 80 minutes were sintered at 1100 degrees C and 1300 degrees C. The influence of mechanical activation on phase composition and crystal structure has been analyzed by XRD, while the effect of activation and sintering process on microstructure was investigated by scanning electron microscopy. It has been established that temperature of 1100 degrees C was to low to induce final sintering stage for both systems. Moreover, we concluded that barium-zinc-titanate ceramics exhibited better sinterability than magnesium-titanate ceramics.", publisher = "Međunarodni Institut za nauku o sinterovanju, Beograd", journal = "Science of Sintering", title = "Sintering of Mechanically Activated Magnesium-titanate and Barium-zinc-titanate Ceramics", pages = "151-145", number = "2", volume = "43", doi = "10.2298/SOS1102145O" }
Obradović, N., Filipović, S., Pavlović, V. B., Maričić, A., Mitrović, N., Balać, I.,& Ristić, M. M.. (2011). Sintering of Mechanically Activated Magnesium-titanate and Barium-zinc-titanate Ceramics. in Science of Sintering Međunarodni Institut za nauku o sinterovanju, Beograd., 43(2), 145-151. https://doi.org/10.2298/SOS1102145O
Obradović N, Filipović S, Pavlović VB, Maričić A, Mitrović N, Balać I, Ristić MM. Sintering of Mechanically Activated Magnesium-titanate and Barium-zinc-titanate Ceramics. in Science of Sintering. 2011;43(2):145-151. doi:10.2298/SOS1102145O .
Obradović, Nina, Filipović, Suzana, Pavlović, Vladimir B., Maričić, Aleksa, Mitrović, N., Balać, Igor, Ristić, Momčilo M., "Sintering of Mechanically Activated Magnesium-titanate and Barium-zinc-titanate Ceramics" in Science of Sintering, 43, no. 2 (2011):145-151, https://doi.org/10.2298/SOS1102145O . .