Experimental Investigation of Microcutting Mechanisms in Granite Grinding
Samo za registrovane korisnike
2011
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
This paper shows the results of investigations performed in the brittle materials microcutting at the Faculty of Mechanical Engineering, Belgrade University. The interactions between a single diamond grain and the machined granite are analyzed. The change in the normal cutting force as a function of grain penetration speed and depth was experimentally established in microcutting of two types of granite originating from Serbia. Based on the grain traces on granite and the generated cracks, the critical grain penetration depth for the formation of brittle fracturing was established. The experiments are intended to assist in the optimization of the grinding process as technology dominant in the granite finishing. [DOI: 10.1115/1.4003521]
Ključne reči:
granite / fracture / cutting force / cracks / chipIzvor:
Journal of Manufacturing Science and Engineering-Transactions of The Asme, 2011, 133, 2Izdavač:
- Asme-Amer Soc Mechanical Eng, New York
DOI: 10.1115/1.4003521
ISSN: 1087-1357
WoS: 000289148700017
Scopus: 2-s2.0-79952583603
Kolekcije
Institucija/grupa
Mašinski fakultetTY - JOUR AU - Tanović, Ljubodrag AU - Bojanić, Pavao AU - Puzović, Radovan AU - Milutinović, M. PY - 2011 UR - https://machinery.mas.bg.ac.rs/handle/123456789/1161 AB - This paper shows the results of investigations performed in the brittle materials microcutting at the Faculty of Mechanical Engineering, Belgrade University. The interactions between a single diamond grain and the machined granite are analyzed. The change in the normal cutting force as a function of grain penetration speed and depth was experimentally established in microcutting of two types of granite originating from Serbia. Based on the grain traces on granite and the generated cracks, the critical grain penetration depth for the formation of brittle fracturing was established. The experiments are intended to assist in the optimization of the grinding process as technology dominant in the granite finishing. [DOI: 10.1115/1.4003521] PB - Asme-Amer Soc Mechanical Eng, New York T2 - Journal of Manufacturing Science and Engineering-Transactions of The Asme T1 - Experimental Investigation of Microcutting Mechanisms in Granite Grinding IS - 2 VL - 133 DO - 10.1115/1.4003521 ER -
@article{ author = "Tanović, Ljubodrag and Bojanić, Pavao and Puzović, Radovan and Milutinović, M.", year = "2011", abstract = "This paper shows the results of investigations performed in the brittle materials microcutting at the Faculty of Mechanical Engineering, Belgrade University. The interactions between a single diamond grain and the machined granite are analyzed. The change in the normal cutting force as a function of grain penetration speed and depth was experimentally established in microcutting of two types of granite originating from Serbia. Based on the grain traces on granite and the generated cracks, the critical grain penetration depth for the formation of brittle fracturing was established. The experiments are intended to assist in the optimization of the grinding process as technology dominant in the granite finishing. [DOI: 10.1115/1.4003521]", publisher = "Asme-Amer Soc Mechanical Eng, New York", journal = "Journal of Manufacturing Science and Engineering-Transactions of The Asme", title = "Experimental Investigation of Microcutting Mechanisms in Granite Grinding", number = "2", volume = "133", doi = "10.1115/1.4003521" }
Tanović, L., Bojanić, P., Puzović, R.,& Milutinović, M.. (2011). Experimental Investigation of Microcutting Mechanisms in Granite Grinding. in Journal of Manufacturing Science and Engineering-Transactions of The Asme Asme-Amer Soc Mechanical Eng, New York., 133(2). https://doi.org/10.1115/1.4003521
Tanović L, Bojanić P, Puzović R, Milutinović M. Experimental Investigation of Microcutting Mechanisms in Granite Grinding. in Journal of Manufacturing Science and Engineering-Transactions of The Asme. 2011;133(2). doi:10.1115/1.4003521 .
Tanović, Ljubodrag, Bojanić, Pavao, Puzović, Radovan, Milutinović, M., "Experimental Investigation of Microcutting Mechanisms in Granite Grinding" in Journal of Manufacturing Science and Engineering-Transactions of The Asme, 133, no. 2 (2011), https://doi.org/10.1115/1.4003521 . .