Eksperimenti sagorevanja različitih tečnih goriva u ložištu sa fluidizovanim slojem
The experiments of fluidized bed combustion of diversely liquid fuel
2010
Аутори
Mladenović, Milica R.Nemoda, Stevan
Dakić, Dragoljub
Repić, Branislav
Erić, Aleksandar M.
Đurović, Dejan M.
Komatina, Mirko
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Ovaj rad predstavlja doprinos ispitivanju sagorevanja alternativnih tečnih goriva poput: taloga iz rezervoara sirove nafte, zatim tečnih materija nastalih kao nusproizvod u procesima procesne, petrohemijske i metalurške industrije, iskorišćenih jestivih i mineralnih ulja, ili glicerina - nusprodukta proizvodnje biodizela. Ove materije se najčešće tretiraju kao otpadne ili istrošene materije i njihovo odlaganje/uklanjanje je najčešće skopčano sa velikim ekološkim problemima. Pored toga, te materije se zbog velikog sadržaja balasta, neujednačenog sastava i gustine ne mogu sagorevati u uobičajenim uređajima za sagorevanje tečnih goriva, pa se kao rešenje nameće tehnologija termičke dezintegracije u fluidizovanom sloju, koji omogućava sagorevanje materija najrazličitijeg porekla i neujednačenog sastava, uz smanjenje emisije polutanata i veliku termičku inertnost postrojenja. U radu je dat opis eksperimentalne instalacije za sagorevanje tečnih goriva velikih gustina u fluidizovanom sloju, k...ao i prikaz eksperimentalnih rezultata sagorevanja nekoliko tipova tečnih goriva sa i bez nečistoća, različitih gustina i viskoziteta, sa i bez dodavanja vode, u dugotrajnim, stacionarnim režimima. Prilikom analize eksperimenata akcenat je postavljen na efikasnost i stabilnost sagorevanja goriva različitog sastava. Razmatran je sadržaj štetnih produkata sagorevanja, uz analizu rasporeda temperatura u ložištu radi određivanja lokacije zone intenzivnog sagorevanja u zavisnosti od karakteristika goriva.
This paper is a contribution to the investigation of combustion of alternative liquid fuels, such as: the sediment from crude-fuel oil tanks; liquid substances - by-products of processes in process, petrochemical and metallurgical industries; used edible and mineral oils; or glycerin - by-product of biodiesel production. These substances are most commonly treated as waste or used matter, and their disposal/removal is most often linked to considerable environmental problems. In addition to this, these substances, due to high content of ballast matter, non-uniform composition and density, can not be burnt in conventional liquid fuel combustors, hence the technology of thermal disintegration in the fluidized bed imposes as a solution, which enables the combustion of fuels of most distinct types and non-uniform compositions, together with diminishing pollutant emissions and high thermal inertia of the facility. In the paper, a description of the experimental set-up for the combustion of hi...gh density liquid fuels in the fluidized bed is given, as well as experimental results obtained by combustion of several liquid fuel types, with or without impurities, with different densities and viscosities, with or without adding water, in long-term, steady regimes. During the analysis of the experiments, the focus was set on the combustion efficiency and stability, for fuels of various compositions. The content of harmful combustion products has been considered, as well as the analysis of furnace temperature distribution, in order to determine the location of the intensive combustion zone as a function of fuel properties.
Кључне речи:
teško tečno gorivo / tečna otpadna goriva / sirova nafta / iskorišćena maziva-ulja / fluidizovani sloj / waste liquid / used lubricating oil / heavy liquid fuel / fluidized bed / crude fuel oilИзвор:
Termotehnika, 2010, 36, 1, 133-142Издавач:
- Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd i Društvo termičara Srbije, Beograd
Колекције
Институција/група
Mašinski fakultetTY - JOUR AU - Mladenović, Milica R. AU - Nemoda, Stevan AU - Dakić, Dragoljub AU - Repić, Branislav AU - Erić, Aleksandar M. AU - Đurović, Dejan M. AU - Komatina, Mirko PY - 2010 UR - https://machinery.mas.bg.ac.rs/handle/123456789/1068 AB - Ovaj rad predstavlja doprinos ispitivanju sagorevanja alternativnih tečnih goriva poput: taloga iz rezervoara sirove nafte, zatim tečnih materija nastalih kao nusproizvod u procesima procesne, petrohemijske i metalurške industrije, iskorišćenih jestivih i mineralnih ulja, ili glicerina - nusprodukta proizvodnje biodizela. Ove materije se najčešće tretiraju kao otpadne ili istrošene materije i njihovo odlaganje/uklanjanje je najčešće skopčano sa velikim ekološkim problemima. Pored toga, te materije se zbog velikog sadržaja balasta, neujednačenog sastava i gustine ne mogu sagorevati u uobičajenim uređajima za sagorevanje tečnih goriva, pa se kao rešenje nameće tehnologija termičke dezintegracije u fluidizovanom sloju, koji omogućava sagorevanje materija najrazličitijeg porekla i neujednačenog sastava, uz smanjenje emisije polutanata i veliku termičku inertnost postrojenja. U radu je dat opis eksperimentalne instalacije za sagorevanje tečnih goriva velikih gustina u fluidizovanom sloju, kao i prikaz eksperimentalnih rezultata sagorevanja nekoliko tipova tečnih goriva sa i bez nečistoća, različitih gustina i viskoziteta, sa i bez dodavanja vode, u dugotrajnim, stacionarnim režimima. Prilikom analize eksperimenata akcenat je postavljen na efikasnost i stabilnost sagorevanja goriva različitog sastava. Razmatran je sadržaj štetnih produkata sagorevanja, uz analizu rasporeda temperatura u ložištu radi određivanja lokacije zone intenzivnog sagorevanja u zavisnosti od karakteristika goriva. AB - This paper is a contribution to the investigation of combustion of alternative liquid fuels, such as: the sediment from crude-fuel oil tanks; liquid substances - by-products of processes in process, petrochemical and metallurgical industries; used edible and mineral oils; or glycerin - by-product of biodiesel production. These substances are most commonly treated as waste or used matter, and their disposal/removal is most often linked to considerable environmental problems. In addition to this, these substances, due to high content of ballast matter, non-uniform composition and density, can not be burnt in conventional liquid fuel combustors, hence the technology of thermal disintegration in the fluidized bed imposes as a solution, which enables the combustion of fuels of most distinct types and non-uniform compositions, together with diminishing pollutant emissions and high thermal inertia of the facility. In the paper, a description of the experimental set-up for the combustion of high density liquid fuels in the fluidized bed is given, as well as experimental results obtained by combustion of several liquid fuel types, with or without impurities, with different densities and viscosities, with or without adding water, in long-term, steady regimes. During the analysis of the experiments, the focus was set on the combustion efficiency and stability, for fuels of various compositions. The content of harmful combustion products has been considered, as well as the analysis of furnace temperature distribution, in order to determine the location of the intensive combustion zone as a function of fuel properties. PB - Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd i Društvo termičara Srbije, Beograd T2 - Termotehnika T1 - Eksperimenti sagorevanja različitih tečnih goriva u ložištu sa fluidizovanim slojem T1 - The experiments of fluidized bed combustion of diversely liquid fuel EP - 142 IS - 1 SP - 133 VL - 36 UR - https://hdl.handle.net/21.15107/rcub_machinery_1068 ER -
@article{ author = "Mladenović, Milica R. and Nemoda, Stevan and Dakić, Dragoljub and Repić, Branislav and Erić, Aleksandar M. and Đurović, Dejan M. and Komatina, Mirko", year = "2010", abstract = "Ovaj rad predstavlja doprinos ispitivanju sagorevanja alternativnih tečnih goriva poput: taloga iz rezervoara sirove nafte, zatim tečnih materija nastalih kao nusproizvod u procesima procesne, petrohemijske i metalurške industrije, iskorišćenih jestivih i mineralnih ulja, ili glicerina - nusprodukta proizvodnje biodizela. Ove materije se najčešće tretiraju kao otpadne ili istrošene materije i njihovo odlaganje/uklanjanje je najčešće skopčano sa velikim ekološkim problemima. Pored toga, te materije se zbog velikog sadržaja balasta, neujednačenog sastava i gustine ne mogu sagorevati u uobičajenim uređajima za sagorevanje tečnih goriva, pa se kao rešenje nameće tehnologija termičke dezintegracije u fluidizovanom sloju, koji omogućava sagorevanje materija najrazličitijeg porekla i neujednačenog sastava, uz smanjenje emisije polutanata i veliku termičku inertnost postrojenja. U radu je dat opis eksperimentalne instalacije za sagorevanje tečnih goriva velikih gustina u fluidizovanom sloju, kao i prikaz eksperimentalnih rezultata sagorevanja nekoliko tipova tečnih goriva sa i bez nečistoća, različitih gustina i viskoziteta, sa i bez dodavanja vode, u dugotrajnim, stacionarnim režimima. Prilikom analize eksperimenata akcenat je postavljen na efikasnost i stabilnost sagorevanja goriva različitog sastava. Razmatran je sadržaj štetnih produkata sagorevanja, uz analizu rasporeda temperatura u ložištu radi određivanja lokacije zone intenzivnog sagorevanja u zavisnosti od karakteristika goriva., This paper is a contribution to the investigation of combustion of alternative liquid fuels, such as: the sediment from crude-fuel oil tanks; liquid substances - by-products of processes in process, petrochemical and metallurgical industries; used edible and mineral oils; or glycerin - by-product of biodiesel production. These substances are most commonly treated as waste or used matter, and their disposal/removal is most often linked to considerable environmental problems. In addition to this, these substances, due to high content of ballast matter, non-uniform composition and density, can not be burnt in conventional liquid fuel combustors, hence the technology of thermal disintegration in the fluidized bed imposes as a solution, which enables the combustion of fuels of most distinct types and non-uniform compositions, together with diminishing pollutant emissions and high thermal inertia of the facility. In the paper, a description of the experimental set-up for the combustion of high density liquid fuels in the fluidized bed is given, as well as experimental results obtained by combustion of several liquid fuel types, with or without impurities, with different densities and viscosities, with or without adding water, in long-term, steady regimes. During the analysis of the experiments, the focus was set on the combustion efficiency and stability, for fuels of various compositions. The content of harmful combustion products has been considered, as well as the analysis of furnace temperature distribution, in order to determine the location of the intensive combustion zone as a function of fuel properties.", publisher = "Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd i Društvo termičara Srbije, Beograd", journal = "Termotehnika", title = "Eksperimenti sagorevanja različitih tečnih goriva u ložištu sa fluidizovanim slojem, The experiments of fluidized bed combustion of diversely liquid fuel", pages = "142-133", number = "1", volume = "36", url = "https://hdl.handle.net/21.15107/rcub_machinery_1068" }
Mladenović, M. R., Nemoda, S., Dakić, D., Repić, B., Erić, A. M., Đurović, D. M.,& Komatina, M.. (2010). Eksperimenti sagorevanja različitih tečnih goriva u ložištu sa fluidizovanim slojem. in Termotehnika Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd i Društvo termičara Srbije, Beograd., 36(1), 133-142. https://hdl.handle.net/21.15107/rcub_machinery_1068
Mladenović MR, Nemoda S, Dakić D, Repić B, Erić AM, Đurović DM, Komatina M. Eksperimenti sagorevanja različitih tečnih goriva u ložištu sa fluidizovanim slojem. in Termotehnika. 2010;36(1):133-142. https://hdl.handle.net/21.15107/rcub_machinery_1068 .
Mladenović, Milica R., Nemoda, Stevan, Dakić, Dragoljub, Repić, Branislav, Erić, Aleksandar M., Đurović, Dejan M., Komatina, Mirko, "Eksperimenti sagorevanja različitih tečnih goriva u ložištu sa fluidizovanim slojem" in Termotehnika, 36, no. 1 (2010):133-142, https://hdl.handle.net/21.15107/rcub_machinery_1068 .