Structural, mechanical and tribological properties of A356 aluminium alloy reinforced with Al2O3, SiC and SiC plus graphite particles
Само за регистроване кориснике
2010
Аутори
Vencl, Aleksandar![](/themes/Miragemashinery/images/orcid.png)
Bobić, Ilija
![](/themes/Miragemashinery/images/orcid.png)
Arostegui, Saioa
Bobić, Biljana
![](/themes/Miragemashinery/images/orcid.png)
Marinković, Aleksandar
![](/themes/Miragemashinery/images/orcid.png)
Babić, Miroslav
Чланак у часопису (Објављена верзија)
![](/themes/Miragemashinery//images/creativecommons/arr.png)
Метаподаци
Приказ свих података о документуАпстракт
Particulate composites with A356 aluminium alloy as a matrix were produced by compocasting process using ceramic particles (Al2O3, SiC) and graphite particles. The matrix alloy and the composites were thermally processed applying the T6 heat treatment regime. Structural, mechanical and tribological properties of heat treated matrix alloy and the composites were examined and compared. It was shown that heat treatment affected microstructure of the composites matrix. The fracture of the composites matrix was ductile, while transition from ductile to brittle fracture occurred in the zone of reinforcing particles. The values of elasticity modulus of all the composites were higher in relation to the matrix alloy. It was also established that wear resistance and coefficient of friction were better at the SiC particulate composites than at the Al2O3 particulate composite, while the addition of graphite particles improved tribological properties further.
Кључне речи:
Wear / Microstructure / Metal matrix composites / Friction / Compocasting / A356 alloyИзвор:
Journal of Alloys and Compounds, 2010, 506, 2, 631-639Издавач:
- Elsevier Science Sa, Lausanne
Финансирање / пројекти:
- Развој напредне опреме за трибодијагностику и MMC на бази лаких метала (RS-MESTD-MPN2006-2010-14005)
DOI: 10.1016/j.jallcom.2010.07.028
ISSN: 0925-8388
WoS: 000282607700032
Scopus: 2-s2.0-77956485660
Колекције
Институција/група
Mašinski fakultetTY - JOUR AU - Vencl, Aleksandar AU - Bobić, Ilija AU - Arostegui, Saioa AU - Bobić, Biljana AU - Marinković, Aleksandar AU - Babić, Miroslav PY - 2010 UR - https://machinery.mas.bg.ac.rs/handle/123456789/1062 AB - Particulate composites with A356 aluminium alloy as a matrix were produced by compocasting process using ceramic particles (Al2O3, SiC) and graphite particles. The matrix alloy and the composites were thermally processed applying the T6 heat treatment regime. Structural, mechanical and tribological properties of heat treated matrix alloy and the composites were examined and compared. It was shown that heat treatment affected microstructure of the composites matrix. The fracture of the composites matrix was ductile, while transition from ductile to brittle fracture occurred in the zone of reinforcing particles. The values of elasticity modulus of all the composites were higher in relation to the matrix alloy. It was also established that wear resistance and coefficient of friction were better at the SiC particulate composites than at the Al2O3 particulate composite, while the addition of graphite particles improved tribological properties further. PB - Elsevier Science Sa, Lausanne T2 - Journal of Alloys and Compounds T1 - Structural, mechanical and tribological properties of A356 aluminium alloy reinforced with Al2O3, SiC and SiC plus graphite particles EP - 639 IS - 2 SP - 631 VL - 506 DO - 10.1016/j.jallcom.2010.07.028 ER -
@article{ author = "Vencl, Aleksandar and Bobić, Ilija and Arostegui, Saioa and Bobić, Biljana and Marinković, Aleksandar and Babić, Miroslav", year = "2010", abstract = "Particulate composites with A356 aluminium alloy as a matrix were produced by compocasting process using ceramic particles (Al2O3, SiC) and graphite particles. The matrix alloy and the composites were thermally processed applying the T6 heat treatment regime. Structural, mechanical and tribological properties of heat treated matrix alloy and the composites were examined and compared. It was shown that heat treatment affected microstructure of the composites matrix. The fracture of the composites matrix was ductile, while transition from ductile to brittle fracture occurred in the zone of reinforcing particles. The values of elasticity modulus of all the composites were higher in relation to the matrix alloy. It was also established that wear resistance and coefficient of friction were better at the SiC particulate composites than at the Al2O3 particulate composite, while the addition of graphite particles improved tribological properties further.", publisher = "Elsevier Science Sa, Lausanne", journal = "Journal of Alloys and Compounds", title = "Structural, mechanical and tribological properties of A356 aluminium alloy reinforced with Al2O3, SiC and SiC plus graphite particles", pages = "639-631", number = "2", volume = "506", doi = "10.1016/j.jallcom.2010.07.028" }
Vencl, A., Bobić, I., Arostegui, S., Bobić, B., Marinković, A.,& Babić, M.. (2010). Structural, mechanical and tribological properties of A356 aluminium alloy reinforced with Al2O3, SiC and SiC plus graphite particles. in Journal of Alloys and Compounds Elsevier Science Sa, Lausanne., 506(2), 631-639. https://doi.org/10.1016/j.jallcom.2010.07.028
Vencl A, Bobić I, Arostegui S, Bobić B, Marinković A, Babić M. Structural, mechanical and tribological properties of A356 aluminium alloy reinforced with Al2O3, SiC and SiC plus graphite particles. in Journal of Alloys and Compounds. 2010;506(2):631-639. doi:10.1016/j.jallcom.2010.07.028 .
Vencl, Aleksandar, Bobić, Ilija, Arostegui, Saioa, Bobić, Biljana, Marinković, Aleksandar, Babić, Miroslav, "Structural, mechanical and tribological properties of A356 aluminium alloy reinforced with Al2O3, SiC and SiC plus graphite particles" in Journal of Alloys and Compounds, 506, no. 2 (2010):631-639, https://doi.org/10.1016/j.jallcom.2010.07.028 . .