TY  - JOUR
AU  - Salih, Rabab
AU  - Veličković, Zlate
AU  - Milošević, Milena
AU  - Pavlović, Vera P.
AU  - Cvijetić, Ilija
AU  - Sofrenić, Ivana V.
AU  - Gržetić, Jelena D.
AU  - Marinković, Aleksandar
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/3952
AB  - Multifunctional lignin bio-based adsorbent, b-LMS, was obtained via inverse copolymerization in the suspension of acryloyl modified kraft lignin (KfL-AA) and bio-based trimethylolpropane triacrylate (bio-TMPTA). Morphological and structural characterization of KfL-AA and b-LMS was performed using BET, FTIR, Raman, NMR, TGA, SEM, and XPS techniques. The b-LMS microspheres with 253 ± 42 μm diameters, 69.4 m2 g−1 surface area, and 59% porosity efficiently adsorb Malachite Green (MG), Tartrazine (T), and Methyl Red (MR) dye. The influence of pH, pollutant concentration, temperature, and time on the removal efficiency was studied in a batch mode. Favorable and spontaneous processes with high adsorption capacities e.g. 116.8 mg g−1 for MG, 86.8 mg g−1 for T, and 68.6 mg g−1 for MR indicate the significant adsorptive potential of b-LMS. Results from diffusional and single mass transfer resistance studies indicate that pore diffusion is a rate-limiting step. Theoretical calculations confirmed a higher affinity of b-LMS to cationic dye MG compared with an anionic and neutral one, i.e. T and MR, respectively. The data fitting from a flow system, using semi-empirical equations and Pore Surface Diffusion Modelling (PSDM) provided breakthrough point determination. The results from the desorption and competitive adsorption study proved the exceptional performance of b-LMS. Moreover, sulfation of b-LMS, i.e.production of b-LMS-OSO3H, introduced high-affinity sulfate groups with respect to cationic dye and cations. Developed methodology implements the principle of sustainable development and offers concept whose results contribute to the minimization of environmental pollution.
PB  - Elsevier
T2  - Journal of Environmental Management
T1  - Lignin based microspheres for effective dyes removal: Design, synthesis and adsorption mechanism supported with theoretical study
IS  - January
SP  - 116838
VL  - 326
DO  - 10.1016/j.jenvman.2022.116838
ER  - 

@article{
author = "Salih, Rabab and Veličković, Zlate and Milošević, Milena and Pavlović, Vera P. and Cvijetić, Ilija and Sofrenić, Ivana V. and Gržetić, Jelena D. and Marinković, Aleksandar",
year = "2023",
abstract = "Multifunctional lignin bio-based adsorbent, b-LMS, was obtained via inverse copolymerization in the suspension of acryloyl modified kraft lignin (KfL-AA) and bio-based trimethylolpropane triacrylate (bio-TMPTA). Morphological and structural characterization of KfL-AA and b-LMS was performed using BET, FTIR, Raman, NMR, TGA, SEM, and XPS techniques. The b-LMS microspheres with 253 ± 42 μm diameters, 69.4 m2 g−1 surface area, and 59% porosity efficiently adsorb Malachite Green (MG), Tartrazine (T), and Methyl Red (MR) dye. The influence of pH, pollutant concentration, temperature, and time on the removal efficiency was studied in a batch mode. Favorable and spontaneous processes with high adsorption capacities e.g. 116.8 mg g−1 for MG, 86.8 mg g−1 for T, and 68.6 mg g−1 for MR indicate the significant adsorptive potential of b-LMS. Results from diffusional and single mass transfer resistance studies indicate that pore diffusion is a rate-limiting step. Theoretical calculations confirmed a higher affinity of b-LMS to cationic dye MG compared with an anionic and neutral one, i.e. T and MR, respectively. The data fitting from a flow system, using semi-empirical equations and Pore Surface Diffusion Modelling (PSDM) provided breakthrough point determination. The results from the desorption and competitive adsorption study proved the exceptional performance of b-LMS. Moreover, sulfation of b-LMS, i.e.production of b-LMS-OSO3H, introduced high-affinity sulfate groups with respect to cationic dye and cations. Developed methodology implements the principle of sustainable development and offers concept whose results contribute to the minimization of environmental pollution.",
publisher = "Elsevier",
journal = "Journal of Environmental Management",
title = "Lignin based microspheres for effective dyes removal: Design, synthesis and adsorption mechanism supported with theoretical study",
number = "January",
pages = "116838",
volume = "326",
doi = "10.1016/j.jenvman.2022.116838"
}

Salih, R., Veličković, Z., Milošević, M., Pavlović, V. P., Cvijetić, I., Sofrenić, I. V., Gržetić, J. D.,& Marinković, A.. (2023). Lignin based microspheres for effective dyes removal: Design, synthesis and adsorption mechanism supported with theoretical study. in Journal of Environmental Management
Elsevier., 326(January), 116838.
https://doi.org/10.1016/j.jenvman.2022.116838

Salih R, Veličković Z, Milošević M, Pavlović VP, Cvijetić I, Sofrenić IV, Gržetić JD, Marinković A. Lignin based microspheres for effective dyes removal: Design, synthesis and adsorption mechanism supported with theoretical study. in Journal of Environmental Management. 2023;326(January):116838.
doi:10.1016/j.jenvman.2022.116838 .

Salih, Rabab, Veličković, Zlate, Milošević, Milena, Pavlović, Vera P., Cvijetić, Ilija, Sofrenić, Ivana V., Gržetić, Jelena D., Marinković, Aleksandar, "Lignin based microspheres for effective dyes removal: Design, synthesis and adsorption mechanism supported with theoretical study" in Journal of Environmental Management, 326, no. January (2023):116838,
https://doi.org/10.1016/j.jenvman.2022.116838 . .

TY  - JOUR
AU  - Salih, Rabab
AU  - Veličković, Zlate
AU  - Milošević, Milena
AU  - Pavlović, Vera P.
AU  - Cvijetić, Ilija
AU  - Sofrenić, Ivana V.
AU  - Gržetić, Jelena D.
AU  - Marinković, Aleksandar
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7310
AB  - Multifunctional lignin bio-based adsorbent, b-LMS, was obtained via inverse copolymerization in the suspension of acryloyl modified kraft lignin (KfL-AA) and bio-based trimethylolpropane triacrylate (bio-TMPTA). Morphological and structural characterization of KfL-AA and b-LMS was performed using BET, FTIR, Raman, NMR, TGA, SEM, and XPS techniques. The b-LMS microspheres with 253 ± 42 μm diameters, 69.4 m2 g−1 surface area, and 59% porosity efficiently adsorb Malachite Green (MG), Tartrazine (T), and Methyl Red (MR) dye. The influence of pH, pollutant concentration, temperature, and time on the removal efficiency was studied in a batch mode. Favorable and spontaneous processes with high adsorption capacities e.g. 116.8 mg g−1 for MG, 86.8 mg g−1 for T, and 68.6 mg g−1 for MR indicate the significant adsorptive potential of b-LMS. Results from diffusional and single mass transfer resistance studies indicate that pore diffusion is a rate-limiting step. Theoretical calculations confirmed a higher affinity of b-LMS to cationic dye MG compared with an anionic and neutral one, i.e. T and MR, respectively. The data fitting from a flow system, using semi-empirical equations and Pore Surface Diffusion Modelling (PSDM) provided breakthrough point determination. The results from the desorption and competitive adsorption study proved the exceptional performance of b-LMS. Moreover, sulfation of b-LMS, i.e.production of b-LMS-OSO3H, introduced high-affinity sulfate groups with respect to cationic dye and cations. Developed methodology implements the principle of sustainable development and offers concept whose results contribute to the minimization of environmental pollution.
PB  - Elsevier
T2  - Journal of Environmental Management
T1  - Lignin based microspheres for effective dyes removal: Design, synthesis and adsorption mechanism supported with theoretical study
SP  - 116838
VL  - 326
DO  - 10.1016/j.jenvman.2022.116838
ER  - 

@article{
author = "Salih, Rabab and Veličković, Zlate and Milošević, Milena and Pavlović, Vera P. and Cvijetić, Ilija and Sofrenić, Ivana V. and Gržetić, Jelena D. and Marinković, Aleksandar",
year = "2023",
abstract = "Multifunctional lignin bio-based adsorbent, b-LMS, was obtained via inverse copolymerization in the suspension of acryloyl modified kraft lignin (KfL-AA) and bio-based trimethylolpropane triacrylate (bio-TMPTA). Morphological and structural characterization of KfL-AA and b-LMS was performed using BET, FTIR, Raman, NMR, TGA, SEM, and XPS techniques. The b-LMS microspheres with 253 ± 42 μm diameters, 69.4 m2 g−1 surface area, and 59% porosity efficiently adsorb Malachite Green (MG), Tartrazine (T), and Methyl Red (MR) dye. The influence of pH, pollutant concentration, temperature, and time on the removal efficiency was studied in a batch mode. Favorable and spontaneous processes with high adsorption capacities e.g. 116.8 mg g−1 for MG, 86.8 mg g−1 for T, and 68.6 mg g−1 for MR indicate the significant adsorptive potential of b-LMS. Results from diffusional and single mass transfer resistance studies indicate that pore diffusion is a rate-limiting step. Theoretical calculations confirmed a higher affinity of b-LMS to cationic dye MG compared with an anionic and neutral one, i.e. T and MR, respectively. The data fitting from a flow system, using semi-empirical equations and Pore Surface Diffusion Modelling (PSDM) provided breakthrough point determination. The results from the desorption and competitive adsorption study proved the exceptional performance of b-LMS. Moreover, sulfation of b-LMS, i.e.production of b-LMS-OSO3H, introduced high-affinity sulfate groups with respect to cationic dye and cations. Developed methodology implements the principle of sustainable development and offers concept whose results contribute to the minimization of environmental pollution.",
publisher = "Elsevier",
journal = "Journal of Environmental Management",
title = "Lignin based microspheres for effective dyes removal: Design, synthesis and adsorption mechanism supported with theoretical study",
pages = "116838",
volume = "326",
doi = "10.1016/j.jenvman.2022.116838"
}

Salih, R., Veličković, Z., Milošević, M., Pavlović, V. P., Cvijetić, I., Sofrenić, I. V., Gržetić, J. D.,& Marinković, A.. (2023). Lignin based microspheres for effective dyes removal: Design, synthesis and adsorption mechanism supported with theoretical study. in Journal of Environmental Management
Elsevier., 326, 116838.
https://doi.org/10.1016/j.jenvman.2022.116838

Salih R, Veličković Z, Milošević M, Pavlović VP, Cvijetić I, Sofrenić IV, Gržetić JD, Marinković A. Lignin based microspheres for effective dyes removal: Design, synthesis and adsorption mechanism supported with theoretical study. in Journal of Environmental Management. 2023;326:116838.
doi:10.1016/j.jenvman.2022.116838 .

Salih, Rabab, Veličković, Zlate, Milošević, Milena, Pavlović, Vera P., Cvijetić, Ilija, Sofrenić, Ivana V., Gržetić, Jelena D., Marinković, Aleksandar, "Lignin based microspheres for effective dyes removal: Design, synthesis and adsorption mechanism supported with theoretical study" in Journal of Environmental Management, 326 (2023):116838,
https://doi.org/10.1016/j.jenvman.2022.116838 . .

TY  - JOUR
AU  - Anđelković, Ljubica
AU  - Šuljagić, Marija
AU  - Mirković, Miljana
AU  - Pavlović, Vera P.
AU  - Petronijević, Ivan
AU  - Stanković, Dalibor M.
AU  - Jeremić, Dejan
AU  - Uskoković, Vuk
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7060
AB  - The combination of an intense absorption of visible light and p-type semiconducting nature makes spinel cobalt oxide (Co3O4) a very attractive material for various optoelectronic applications. However, the traditional methods for its synthesis have been either time- and energy-consuming or relying on toxic chemicals. To solve this issue, a simple, facile, and eco-friendly method of synthesis was successfully developed to obtain spinel Co3O4 nanoparticles. The novel method for obtaining pure and monophasic Co3O4 reported here is based on the thermal decomposition of hexaaquacobalt(II) D-camphor10-sulfonate at 900 °C. This fast solid-state synthesis route overcomes the disadvantages of many combustion methods, most critically by avoiding the use of toxic organic solvents. The synthesized material was subjected to a detailed characterization to assess its potential for use as a nanocatalyst. The band gap measurements indicated the presence of two band gaps, one at 2.10 eV and another at 1.22 eV, confirming the purity and semiconducting properties of the sample. The electrochemical studies demonstrated a significant enhancement in the electron transfer kinetics with the addition of the synthesized Co3O4 to the carbon-paste electrode, leading to an enhanced electrocatalytic performance. These prominent functional properties, suitable for a wide range of technological applications, pave way for the implementation of the reported method for the synthesis of Co3O4 on a larger industrial scale.
PB  - Elsevier
T2  - Ceramics International
T1  - Semiconducting cobalt oxide nanocatalyst obtained through an eco-friendly thermal decomposition
EP  - 23498
SP  - 23491
VL  - 49
DO  - 10.1016/j.ceramint.2023.04.182
ER  - 

@article{
author = "Anđelković, Ljubica and Šuljagić, Marija and Mirković, Miljana and Pavlović, Vera P. and Petronijević, Ivan and Stanković, Dalibor M. and Jeremić, Dejan and Uskoković, Vuk",
year = "2023",
abstract = "The combination of an intense absorption of visible light and p-type semiconducting nature makes spinel cobalt oxide (Co3O4) a very attractive material for various optoelectronic applications. However, the traditional methods for its synthesis have been either time- and energy-consuming or relying on toxic chemicals. To solve this issue, a simple, facile, and eco-friendly method of synthesis was successfully developed to obtain spinel Co3O4 nanoparticles. The novel method for obtaining pure and monophasic Co3O4 reported here is based on the thermal decomposition of hexaaquacobalt(II) D-camphor10-sulfonate at 900 °C. This fast solid-state synthesis route overcomes the disadvantages of many combustion methods, most critically by avoiding the use of toxic organic solvents. The synthesized material was subjected to a detailed characterization to assess its potential for use as a nanocatalyst. The band gap measurements indicated the presence of two band gaps, one at 2.10 eV and another at 1.22 eV, confirming the purity and semiconducting properties of the sample. The electrochemical studies demonstrated a significant enhancement in the electron transfer kinetics with the addition of the synthesized Co3O4 to the carbon-paste electrode, leading to an enhanced electrocatalytic performance. These prominent functional properties, suitable for a wide range of technological applications, pave way for the implementation of the reported method for the synthesis of Co3O4 on a larger industrial scale.",
publisher = "Elsevier",
journal = "Ceramics International",
title = "Semiconducting cobalt oxide nanocatalyst obtained through an eco-friendly thermal decomposition",
pages = "23498-23491",
volume = "49",
doi = "10.1016/j.ceramint.2023.04.182"
}

Anđelković, L., Šuljagić, M., Mirković, M., Pavlović, V. P., Petronijević, I., Stanković, D. M., Jeremić, D.,& Uskoković, V.. (2023). Semiconducting cobalt oxide nanocatalyst obtained through an eco-friendly thermal decomposition. in Ceramics International
Elsevier., 49, 23491-23498.
https://doi.org/10.1016/j.ceramint.2023.04.182

Anđelković L, Šuljagić M, Mirković M, Pavlović VP, Petronijević I, Stanković DM, Jeremić D, Uskoković V. Semiconducting cobalt oxide nanocatalyst obtained through an eco-friendly thermal decomposition. in Ceramics International. 2023;49:23491-23498.
doi:10.1016/j.ceramint.2023.04.182 .

Anđelković, Ljubica, Šuljagić, Marija, Mirković, Miljana, Pavlović, Vera P., Petronijević, Ivan, Stanković, Dalibor M., Jeremić, Dejan, Uskoković, Vuk, "Semiconducting cobalt oxide nanocatalyst obtained through an eco-friendly thermal decomposition" in Ceramics International, 49 (2023):23491-23498,
https://doi.org/10.1016/j.ceramint.2023.04.182 . .

TY  - JOUR
AU  - Jovanović, Jelena
AU  - Ćirković, Jovana
AU  - Radojković, Aleksandar
AU  - Mutavdzić, Dragosav
AU  - Tanasijević, Gordana
AU  - Joksimović, Kristina
AU  - Bakić, Gordana
AU  - Branković, Goran
AU  - Branković, Zorica
PY  - 2021
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/3527
AB  - This investigation was aimed to develop films and coatings based on natural biopolymers and active components, with physicochemical and functional properties for application in antimicrobial packaging. Biopolymer films were obtained from emulsions and dispersions by casting method. Coatings were formed by the application of emulsions on existing packaging. Synthesis of emulsions and dispersions were performed by combining biopolymers (chitosan-gelatin, pectin-gelatin) with lemongrass essential oil (LEO), Zn(CH3COO)2.2H2O, or ZnO, as active components. Fourier transform infrared (FTIR) spectra of the films showed that the addition of glycerol contributed to the forming of strong hydrogen bonds between glycerol and chitosan-gelatin or pectin-gelatin composites, facilitating the process of polymer branching, which is substantial for encapsulation. Thermal analyses revealed two characteristic processes occurring at 110 degrees C (water evaporation) and within 215-235 degrees C (degradation of polysaccharide and glycerol). Major weight losses were observed at 290 degrees C (chitosan-gelatin films) and 215 degrees C (pectin-gelatin films). The chitosan-gelatin films exhibited a lower degree of solubility (31-21%), and better mechanical properties comparing with the pectin-gelatin films. The chitosan-gelatin emulsions and dispersions exhibited a higher antibacterial effect in vitro against E. coli, B. subtilis, and S. aureus. In the case of the pectin-gelatin emulsions, the impact of LEO on the antibacterial activity was evident. The effects of biopolymer coatings on the development of microorganisms on fresh raspberries (Rubus idaeus L.) were performed in vivo during eight days of raspberry storage at refrigerator temperature. The tested coatings extended the shelf life of stored raspberries from four to eight days. The synergistic effect between LEO and ZnO or Zn-Ac was observed both in vivo and in vitro.
PB  - Elsevier Science Sa, Lausanne
T2  - Progress in Organic Coatings
T1  - Chitosan and pectin-based films and coatings with active components for application in antimicrobial food packaging
VL  - 158
DO  - 10.1016/j.porgcoat.2021.106349
ER  - 

@article{
author = "Jovanović, Jelena and Ćirković, Jovana and Radojković, Aleksandar and Mutavdzić, Dragosav and Tanasijević, Gordana and Joksimović, Kristina and Bakić, Gordana and Branković, Goran and Branković, Zorica",
year = "2021",
abstract = "This investigation was aimed to develop films and coatings based on natural biopolymers and active components, with physicochemical and functional properties for application in antimicrobial packaging. Biopolymer films were obtained from emulsions and dispersions by casting method. Coatings were formed by the application of emulsions on existing packaging. Synthesis of emulsions and dispersions were performed by combining biopolymers (chitosan-gelatin, pectin-gelatin) with lemongrass essential oil (LEO), Zn(CH3COO)2.2H2O, or ZnO, as active components. Fourier transform infrared (FTIR) spectra of the films showed that the addition of glycerol contributed to the forming of strong hydrogen bonds between glycerol and chitosan-gelatin or pectin-gelatin composites, facilitating the process of polymer branching, which is substantial for encapsulation. Thermal analyses revealed two characteristic processes occurring at 110 degrees C (water evaporation) and within 215-235 degrees C (degradation of polysaccharide and glycerol). Major weight losses were observed at 290 degrees C (chitosan-gelatin films) and 215 degrees C (pectin-gelatin films). The chitosan-gelatin films exhibited a lower degree of solubility (31-21%), and better mechanical properties comparing with the pectin-gelatin films. The chitosan-gelatin emulsions and dispersions exhibited a higher antibacterial effect in vitro against E. coli, B. subtilis, and S. aureus. In the case of the pectin-gelatin emulsions, the impact of LEO on the antibacterial activity was evident. The effects of biopolymer coatings on the development of microorganisms on fresh raspberries (Rubus idaeus L.) were performed in vivo during eight days of raspberry storage at refrigerator temperature. The tested coatings extended the shelf life of stored raspberries from four to eight days. The synergistic effect between LEO and ZnO or Zn-Ac was observed both in vivo and in vitro.",
publisher = "Elsevier Science Sa, Lausanne",
journal = "Progress in Organic Coatings",
title = "Chitosan and pectin-based films and coatings with active components for application in antimicrobial food packaging",
volume = "158",
doi = "10.1016/j.porgcoat.2021.106349"
}

Jovanović, J., Ćirković, J., Radojković, A., Mutavdzić, D., Tanasijević, G., Joksimović, K., Bakić, G., Branković, G.,& Branković, Z.. (2021). Chitosan and pectin-based films and coatings with active components for application in antimicrobial food packaging. in Progress in Organic Coatings
Elsevier Science Sa, Lausanne., 158.
https://doi.org/10.1016/j.porgcoat.2021.106349

Jovanović J, Ćirković J, Radojković A, Mutavdzić D, Tanasijević G, Joksimović K, Bakić G, Branković G, Branković Z. Chitosan and pectin-based films and coatings with active components for application in antimicrobial food packaging. in Progress in Organic Coatings. 2021;158.
doi:10.1016/j.porgcoat.2021.106349 .

Jovanović, Jelena, Ćirković, Jovana, Radojković, Aleksandar, Mutavdzić, Dragosav, Tanasijević, Gordana, Joksimović, Kristina, Bakić, Gordana, Branković, Goran, Branković, Zorica, "Chitosan and pectin-based films and coatings with active components for application in antimicrobial food packaging" in Progress in Organic Coatings, 158 (2021),
https://doi.org/10.1016/j.porgcoat.2021.106349 . .