TY  - PAT
AU  - Jarić, Marko
AU  - Maslarević, Aleksandar
AU  - Petronić, Sanja
AU  - Maksimović, Mirko
AU  - Brat, Zagorka
PY  - 2024
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7814
PB  - Beograd : Institut za opštu i fizičku hemiju
T1  - Filter za prečišćavanje fluida rashladnih tornjeva procesnih postrojenja
IS  - 1815
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7814
ER  - 

@misc{
author = "Jarić, Marko and Maslarević, Aleksandar and Petronić, Sanja and Maksimović, Mirko and Brat, Zagorka",
year = "2024",
publisher = "Beograd : Institut za opštu i fizičku hemiju",
title = "Filter za prečišćavanje fluida rashladnih tornjeva procesnih postrojenja",
number = "1815",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7814"
}

Jarić, M., Maslarević, A., Petronić, S., Maksimović, M.,& Brat, Z.. (2024). Filter za prečišćavanje fluida rashladnih tornjeva procesnih postrojenja. 
Beograd : Institut za opštu i fizičku hemiju.(1815).
https://hdl.handle.net/21.15107/rcub_machinery_7814

Jarić M, Maslarević A, Petronić S, Maksimović M, Brat Z. Filter za prečišćavanje fluida rashladnih tornjeva procesnih postrojenja. 2024;(1815).
https://hdl.handle.net/21.15107/rcub_machinery_7814 .

Jarić, Marko, Maslarević, Aleksandar, Petronić, Sanja, Maksimović, Mirko, Brat, Zagorka, "Filter za prečišćavanje fluida rashladnih tornjeva procesnih postrojenja", no. 1815 (2024),
https://hdl.handle.net/21.15107/rcub_machinery_7814 .

TY  - JOUR
AU  - Petronić, Sanja
AU  - Jarić, Marko
AU  - Stević, Zoran
AU  - Maslarević, Aleksandar
AU  - Vasović, Ivana
PY  - 2024
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7798
AB  - The paper presents a detailed description of the oil rectification process used in upstream oil and gas plants, including the significant equipment involved. One such equipment highlighted in the study is a pressure vessel utilized as a separator to separate the liquid and gas phases. This pressure vessel has been in operation for over two decades. A thorough examination of the mentioned pressure equipment was conducted during the process evaluation. It was discovered that the internal side of the vessel, particularly its back elliptical head, had suffered extensive damage due to erosion and corrosion, emerging as the most significant cause of the deterioration. The application of RBI-estimation revealed that the vessel falls under the category of highly risk equipment, and there is a significant risk of both environmental and financial consequences associated with its potential failure (leakage). Such failure is anticipated to occur promptly in the area below the wear plate of the vessel's nozzle.
PB  - Elsevier
T2  - International Journal of Pressure Vessels and Piping
T1  - Analysis of remaining life assessment of three-phase gravity separator for oil rectification with the simultaneous usean RBI matrix
SP  - 105206
VL  - 209
DO  - 10.1016/j.ijpvp.2024
ER  - 

@article{
author = "Petronić, Sanja and Jarić, Marko and Stević, Zoran and Maslarević, Aleksandar and Vasović, Ivana",
year = "2024",
abstract = "The paper presents a detailed description of the oil rectification process used in upstream oil and gas plants, including the significant equipment involved. One such equipment highlighted in the study is a pressure vessel utilized as a separator to separate the liquid and gas phases. This pressure vessel has been in operation for over two decades. A thorough examination of the mentioned pressure equipment was conducted during the process evaluation. It was discovered that the internal side of the vessel, particularly its back elliptical head, had suffered extensive damage due to erosion and corrosion, emerging as the most significant cause of the deterioration. The application of RBI-estimation revealed that the vessel falls under the category of highly risk equipment, and there is a significant risk of both environmental and financial consequences associated with its potential failure (leakage). Such failure is anticipated to occur promptly in the area below the wear plate of the vessel's nozzle.",
publisher = "Elsevier",
journal = "International Journal of Pressure Vessels and Piping",
title = "Analysis of remaining life assessment of three-phase gravity separator for oil rectification with the simultaneous usean RBI matrix",
pages = "105206",
volume = "209",
doi = "10.1016/j.ijpvp.2024"
}

Petronić, S., Jarić, M., Stević, Z., Maslarević, A.,& Vasović, I.. (2024). Analysis of remaining life assessment of three-phase gravity separator for oil rectification with the simultaneous usean RBI matrix. in International Journal of Pressure Vessels and Piping
Elsevier., 209, 105206.
https://doi.org/10.1016/j.ijpvp.2024

Petronić S, Jarić M, Stević Z, Maslarević A, Vasović I. Analysis of remaining life assessment of three-phase gravity separator for oil rectification with the simultaneous usean RBI matrix. in International Journal of Pressure Vessels and Piping. 2024;209:105206.
doi:10.1016/j.ijpvp.2024 .

Petronić, Sanja, Jarić, Marko, Stević, Zoran, Maslarević, Aleksandar, Vasović, Ivana, "Analysis of remaining life assessment of three-phase gravity separator for oil rectification with the simultaneous usean RBI matrix" in International Journal of Pressure Vessels and Piping, 209 (2024):105206,
https://doi.org/10.1016/j.ijpvp.2024 . .

TY  - CONF
AU  - Jarić, Marko
AU  - Petronić, Sanja
AU  - Budimir, Nikola
AU  - Polić, Suzana
AU  - Rudonja, Nedžad
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7212
AB  - Heat exchangers used in agricultural processes are mainly manufactured by three technologies: brazed copper-brass, mechanically assembled aluminum and brazed aluminum. The appropriate choice depends on various criteria: price, weight, corrosion resistance, performance in a limited volume, required pressure drops, temperature resistance, reliability, etc. Brazed aluminum is increasingly popular due to several advantages, such as resistance to high pressure and temperatures. Aluminum heat exchangers can be exposed to external and internal corrosion in various environmental conditions. Corrosion has a negative impact on the mechanical integrity and thermal performance of heat exchangers. Therefore, specific operating design parameters, as well as mechanical design characteristics, are of great importance for consideration in construction. Proper selection and design can ensure the successful and safe operation of the heat exchanger and the plant itself. The HVAC industry is directed towards the search for the best solutions in order to increase the performance, energy efficiency and durability of the equipment while reducing the costs of their production. Aluminum pipes and other aluminum components are increasingly replacing copper pipes. In this paper, application, design, assembling process and operation considerations for brazed aluminum heat exchangers used for needs in agricultural processes have presented.
PB  - University of Belgrade - Faculty of Agriculture
C3  - ISAE 2023  The 6th International Symposium on Agricultural Engineering, 19th – 21st Oct 2023, Belgrade–Zemun, Serbia
T1  - Dimensioning and assemblying of brazed aluminium heat exchanger for needs of agricultural process plants
EP  - 8
SP  - 1
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7212
ER  - 

@conference{
author = "Jarić, Marko and Petronić, Sanja and Budimir, Nikola and Polić, Suzana and Rudonja, Nedžad",
year = "2023",
abstract = "Heat exchangers used in agricultural processes are mainly manufactured by three technologies: brazed copper-brass, mechanically assembled aluminum and brazed aluminum. The appropriate choice depends on various criteria: price, weight, corrosion resistance, performance in a limited volume, required pressure drops, temperature resistance, reliability, etc. Brazed aluminum is increasingly popular due to several advantages, such as resistance to high pressure and temperatures. Aluminum heat exchangers can be exposed to external and internal corrosion in various environmental conditions. Corrosion has a negative impact on the mechanical integrity and thermal performance of heat exchangers. Therefore, specific operating design parameters, as well as mechanical design characteristics, are of great importance for consideration in construction. Proper selection and design can ensure the successful and safe operation of the heat exchanger and the plant itself. The HVAC industry is directed towards the search for the best solutions in order to increase the performance, energy efficiency and durability of the equipment while reducing the costs of their production. Aluminum pipes and other aluminum components are increasingly replacing copper pipes. In this paper, application, design, assembling process and operation considerations for brazed aluminum heat exchangers used for needs in agricultural processes have presented.",
publisher = "University of Belgrade - Faculty of Agriculture",
journal = "ISAE 2023  The 6th International Symposium on Agricultural Engineering, 19th – 21st Oct 2023, Belgrade–Zemun, Serbia",
title = "Dimensioning and assemblying of brazed aluminium heat exchanger for needs of agricultural process plants",
pages = "8-1",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7212"
}

Jarić, M., Petronić, S., Budimir, N., Polić, S.,& Rudonja, N.. (2023). Dimensioning and assemblying of brazed aluminium heat exchanger for needs of agricultural process plants. in ISAE 2023  The 6th International Symposium on Agricultural Engineering, 19th – 21st Oct 2023, Belgrade–Zemun, Serbia
University of Belgrade - Faculty of Agriculture., 1-8.
https://hdl.handle.net/21.15107/rcub_machinery_7212

Jarić M, Petronić S, Budimir N, Polić S, Rudonja N. Dimensioning and assemblying of brazed aluminium heat exchanger for needs of agricultural process plants. in ISAE 2023  The 6th International Symposium on Agricultural Engineering, 19th – 21st Oct 2023, Belgrade–Zemun, Serbia. 2023;:1-8.
https://hdl.handle.net/21.15107/rcub_machinery_7212 .

Jarić, Marko, Petronić, Sanja, Budimir, Nikola, Polić, Suzana, Rudonja, Nedžad, "Dimensioning and assemblying of brazed aluminium heat exchanger for needs of agricultural process plants" in ISAE 2023  The 6th International Symposium on Agricultural Engineering, 19th – 21st Oct 2023, Belgrade–Zemun, Serbia (2023):1-8,
https://hdl.handle.net/21.15107/rcub_machinery_7212 .

TY  - CONF
AU  - Jarić, Marko
AU  - Petronić, Sanja
AU  - Budimir, Nikola
AU  - Polić, Suzana
AU  - Rudonja, Nedžad
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7756
AB  - Heat exchangers used in agricultural processes are mainly
manufactured by three technologies: brazed copper-brass, mechanically assembled
aluminum and brazed aluminum. The appropriate choice depends on various criteria:
price, weight, corrosion resistance, performance in a limited volume, required pressure
drops, temperature resistance, reliability, etc. Brazed aluminum is increasingly popular
due to several advantages, such as resistance to high pressure and temperatures.
Aluminum heat exchangers can be exposed to external and internal corrosion in
various environmental conditions. Corrosion has a negative impact on the mechanical
integrity and thermal performance of heat exchangers. Therefore, specific operating
design parameters, as well as mechanical design characteristics, are of great
importance for consideration in construction. Proper selection and design can ensure
the successful and safe operation of the heat exchanger and the plant itself. The HVAC
industry is directed towards the search for the best solutions in order to increase the
performance, energy efficiency and durability of the equipment while reducing the costs
of their production. Aluminum pipes and other aluminum components are increasingly
replacing copper pipes. In this paper, application, design, assembling process and
operation considerations for brazed aluminum heat exchangers used for needs in
agricultural processes have presented.
PB  - University of Belgrade, Faculty of Agriculture, Serbia.
C3  - Proceedings of The Sixth International Symposium on Agricultural Engineering ISAE-2023
T1  - DIMENSIONING AND ASSEMBLYING OF BRAZED ALUMINIUM HEAT EXCHANGER FOR NEEDS OF AGRICULTURAL PROCESS PLANTS
EP  - 280
SP  - 271
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7756
ER  - 

@conference{
author = "Jarić, Marko and Petronić, Sanja and Budimir, Nikola and Polić, Suzana and Rudonja, Nedžad",
year = "2023",
abstract = "Heat exchangers used in agricultural processes are mainly
manufactured by three technologies: brazed copper-brass, mechanically assembled
aluminum and brazed aluminum. The appropriate choice depends on various criteria:
price, weight, corrosion resistance, performance in a limited volume, required pressure
drops, temperature resistance, reliability, etc. Brazed aluminum is increasingly popular
due to several advantages, such as resistance to high pressure and temperatures.
Aluminum heat exchangers can be exposed to external and internal corrosion in
various environmental conditions. Corrosion has a negative impact on the mechanical
integrity and thermal performance of heat exchangers. Therefore, specific operating
design parameters, as well as mechanical design characteristics, are of great
importance for consideration in construction. Proper selection and design can ensure
the successful and safe operation of the heat exchanger and the plant itself. The HVAC
industry is directed towards the search for the best solutions in order to increase the
performance, energy efficiency and durability of the equipment while reducing the costs
of their production. Aluminum pipes and other aluminum components are increasingly
replacing copper pipes. In this paper, application, design, assembling process and
operation considerations for brazed aluminum heat exchangers used for needs in
agricultural processes have presented.",
publisher = "University of Belgrade, Faculty of Agriculture, Serbia.",
journal = "Proceedings of The Sixth International Symposium on Agricultural Engineering ISAE-2023",
title = "DIMENSIONING AND ASSEMBLYING OF BRAZED ALUMINIUM HEAT EXCHANGER FOR NEEDS OF AGRICULTURAL PROCESS PLANTS",
pages = "280-271",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7756"
}

Jarić, M., Petronić, S., Budimir, N., Polić, S.,& Rudonja, N.. (2023). DIMENSIONING AND ASSEMBLYING OF BRAZED ALUMINIUM HEAT EXCHANGER FOR NEEDS OF AGRICULTURAL PROCESS PLANTS. in Proceedings of The Sixth International Symposium on Agricultural Engineering ISAE-2023
University of Belgrade, Faculty of Agriculture, Serbia.., 271-280.
https://hdl.handle.net/21.15107/rcub_machinery_7756

Jarić M, Petronić S, Budimir N, Polić S, Rudonja N. DIMENSIONING AND ASSEMBLYING OF BRAZED ALUMINIUM HEAT EXCHANGER FOR NEEDS OF AGRICULTURAL PROCESS PLANTS. in Proceedings of The Sixth International Symposium on Agricultural Engineering ISAE-2023. 2023;:271-280.
https://hdl.handle.net/21.15107/rcub_machinery_7756 .

Jarić, Marko, Petronić, Sanja, Budimir, Nikola, Polić, Suzana, Rudonja, Nedžad, "DIMENSIONING AND ASSEMBLYING OF BRAZED ALUMINIUM HEAT EXCHANGER FOR NEEDS OF AGRICULTURAL PROCESS PLANTS" in Proceedings of The Sixth International Symposium on Agricultural Engineering ISAE-2023 (2023):271-280,
https://hdl.handle.net/21.15107/rcub_machinery_7756 .

TY  - CONF
AU  - Stević, Zoran
AU  - Radovanović, Ilija
AU  - Stolić, Predrag
AU  - Petronić, Sanja
AU  - Jarić, Marko
AU  - Stević, Miša
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7130
AB  - This paper deals with research and analysis of energy efficiency in electric vehicles. In the
context of the increasing popularity of electric vehicles as a viable alternative to traditional internal
combustion vehicles, it becomes crucial to understand and improve their efficiency Factors affecting efficiency are considered, including aerodynamics, vehicle mass, electric drive and battery efficiency, as well as the influence of external factors such as route driving and speed. The research
results were then analyzed in order to determine the key factors that can increase the efficiency of
electric vehicles, such as optimizing aerodynamics, reducing vehicle mass and recovering braking
energy, which can significantly improve energy efficiency. Different ways of optimizing the electric
drive and batteries were also investigated in order to reduce energy loss during driving.
AB  - Ovaj rad se bavi istraživanjem i analizom energetske efikasnosti kod električnih vozila. U
kontekstu sve veće popularnosti električnih vozila kao održive alternative tradicionalnim vozilima
sa unutrašnjim sagorevanjem, postaje ključno razumeti i unaprediti njihovu efikasnost. Razmotreni
su faktori koji utiču na efikasnost, uključujući aerodinamičnost, masu vozila, efikasnost električnog
pogona i baterije, kao i uticaj eksternih faktora poput rute vožnje i brzine. Zatim su analizirani rezultati istraživanja kako bi se utvrdili ključni faktori koji mogu povećati efikasnost električnih
vozila, kao što su optimizacija aerodinamike, smanjenje mase vozila i vraćanje energije kočenja,
koji mogu značajno poboljšati energetsku efikasnost. Takođe su istraženi i različiti načini optimizacije električnog pogona i baterija kako bi se smanjio gubitak energije tokom vožnje.
PB  - SMEITS
C3  - 11th International Conference on Renewable Electrical Power Sources
T1  - Energy efficiency in electric vehicles
EP  - 208
SP  - 203
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7130
ER  - 

@conference{
author = "Stević, Zoran and Radovanović, Ilija and Stolić, Predrag and Petronić, Sanja and Jarić, Marko and Stević, Miša",
year = "2023",
abstract = "This paper deals with research and analysis of energy efficiency in electric vehicles. In the
context of the increasing popularity of electric vehicles as a viable alternative to traditional internal
combustion vehicles, it becomes crucial to understand and improve their efficiency Factors affecting efficiency are considered, including aerodynamics, vehicle mass, electric drive and battery efficiency, as well as the influence of external factors such as route driving and speed. The research
results were then analyzed in order to determine the key factors that can increase the efficiency of
electric vehicles, such as optimizing aerodynamics, reducing vehicle mass and recovering braking
energy, which can significantly improve energy efficiency. Different ways of optimizing the electric
drive and batteries were also investigated in order to reduce energy loss during driving., Ovaj rad se bavi istraživanjem i analizom energetske efikasnosti kod električnih vozila. U
kontekstu sve veće popularnosti električnih vozila kao održive alternative tradicionalnim vozilima
sa unutrašnjim sagorevanjem, postaje ključno razumeti i unaprediti njihovu efikasnost. Razmotreni
su faktori koji utiču na efikasnost, uključujući aerodinamičnost, masu vozila, efikasnost električnog
pogona i baterije, kao i uticaj eksternih faktora poput rute vožnje i brzine. Zatim su analizirani rezultati istraživanja kako bi se utvrdili ključni faktori koji mogu povećati efikasnost električnih
vozila, kao što su optimizacija aerodinamike, smanjenje mase vozila i vraćanje energije kočenja,
koji mogu značajno poboljšati energetsku efikasnost. Takođe su istraženi i različiti načini optimizacije električnog pogona i baterija kako bi se smanjio gubitak energije tokom vožnje.",
publisher = "SMEITS",
journal = "11th International Conference on Renewable Electrical Power Sources",
title = "Energy efficiency in electric vehicles",
pages = "208-203",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7130"
}

Stević, Z., Radovanović, I., Stolić, P., Petronić, S., Jarić, M.,& Stević, M.. (2023). Energy efficiency in electric vehicles. in 11th International Conference on Renewable Electrical Power Sources
SMEITS., 203-208.
https://hdl.handle.net/21.15107/rcub_machinery_7130

Stević Z, Radovanović I, Stolić P, Petronić S, Jarić M, Stević M. Energy efficiency in electric vehicles. in 11th International Conference on Renewable Electrical Power Sources. 2023;:203-208.
https://hdl.handle.net/21.15107/rcub_machinery_7130 .

Stević, Zoran, Radovanović, Ilija, Stolić, Predrag, Petronić, Sanja, Jarić, Marko, Stević, Miša, "Energy efficiency in electric vehicles" in 11th International Conference on Renewable Electrical Power Sources (2023):203-208,
https://hdl.handle.net/21.15107/rcub_machinery_7130 .

TY  - JOUR
AU  - Jarić, Marko
AU  - Budimir, Nikola
AU  - Petronić, Sanja
AU  - Maslarević, Aleksandar
AU  - Jovanović, Aleksandar
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7125
AB  - The paper deals with one of the most general classifica-tions of atmospheric tanks according to their roof type in oil and gas plants. An overview of recommended time frames for inspection of storage tanks is given, depending on their structural characteristics. A detailed view of the storage tank with cone roof is shown, after it was taken out of service for examination purposes. An appropriate necessary random scheme is created for ultrasonic examinations of the tank bottom as its most critical element. Damages observed during the inspection are analysed in detail and remediation plans are prescribed in order to return the inspected tank to its correct condition for further uninterrupted long-term continuous operation.
PB  - Društvo za integritet i vek konstrukcija „Prof. dr Stojan Sedmak“
T2  - Integritet i vek konstrukcija
T1  - Oily-water tank operational reliability analysis in an oil and gas facility
EP  - 86
IS  - 1
SP  - 82
VL  - 23
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7125
ER  - 

@article{
author = "Jarić, Marko and Budimir, Nikola and Petronić, Sanja and Maslarević, Aleksandar and Jovanović, Aleksandar",
year = "2023",
abstract = "The paper deals with one of the most general classifica-tions of atmospheric tanks according to their roof type in oil and gas plants. An overview of recommended time frames for inspection of storage tanks is given, depending on their structural characteristics. A detailed view of the storage tank with cone roof is shown, after it was taken out of service for examination purposes. An appropriate necessary random scheme is created for ultrasonic examinations of the tank bottom as its most critical element. Damages observed during the inspection are analysed in detail and remediation plans are prescribed in order to return the inspected tank to its correct condition for further uninterrupted long-term continuous operation.",
publisher = "Društvo za integritet i vek konstrukcija „Prof. dr Stojan Sedmak“",
journal = "Integritet i vek konstrukcija",
title = "Oily-water tank operational reliability analysis in an oil and gas facility",
pages = "86-82",
number = "1",
volume = "23",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7125"
}

Jarić, M., Budimir, N., Petronić, S., Maslarević, A.,& Jovanović, A.. (2023). Oily-water tank operational reliability analysis in an oil and gas facility. in Integritet i vek konstrukcija
Društvo za integritet i vek konstrukcija „Prof. dr Stojan Sedmak“., 23(1), 82-86.
https://hdl.handle.net/21.15107/rcub_machinery_7125

Jarić M, Budimir N, Petronić S, Maslarević A, Jovanović A. Oily-water tank operational reliability analysis in an oil and gas facility. in Integritet i vek konstrukcija. 2023;23(1):82-86.
https://hdl.handle.net/21.15107/rcub_machinery_7125 .

Jarić, Marko, Budimir, Nikola, Petronić, Sanja, Maslarević, Aleksandar, Jovanović, Aleksandar, "Oily-water tank operational reliability analysis in an oil and gas facility" in Integritet i vek konstrukcija, 23, no. 1 (2023):82-86,
https://hdl.handle.net/21.15107/rcub_machinery_7125 .

TY  - CONF
AU  - Stolić, Predrag
AU  - Stanimirović, Zdravko
AU  - Stanimirović, Ivanka
AU  - Jarić, Marko
AU  - Radovanović, Ilija
AU  - Stević, Zoran
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7211
AB  - Teaching in engineering study programs includes practice that often takes place in laboratories. The implementation of these laboratories is often accompanied by certain limitations and complexities. This paper will show how some of these problems can be overcome by using open source solutions on the example of one such laboratory for basic and master academic studies in the mining engineering program, where students are given practical skills in of working with sensors, process monitoring, and similar activities.
PB  - MIET2023-Odesa-Ukraine
C3  - ISPC «Modern information and electronic technologies»
T1  - Application of open source solutions in the realization of low-cost teaching laboratories
EP  - 40
SP  - 36
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7211
ER  - 

@conference{
author = "Stolić, Predrag and Stanimirović, Zdravko and Stanimirović, Ivanka and Jarić, Marko and Radovanović, Ilija and Stević, Zoran",
year = "2023",
abstract = "Teaching in engineering study programs includes practice that often takes place in laboratories. The implementation of these laboratories is often accompanied by certain limitations and complexities. This paper will show how some of these problems can be overcome by using open source solutions on the example of one such laboratory for basic and master academic studies in the mining engineering program, where students are given practical skills in of working with sensors, process monitoring, and similar activities.",
publisher = "MIET2023-Odesa-Ukraine",
journal = "ISPC «Modern information and electronic technologies»",
title = "Application of open source solutions in the realization of low-cost teaching laboratories",
pages = "40-36",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7211"
}

Stolić, P., Stanimirović, Z., Stanimirović, I., Jarić, M., Radovanović, I.,& Stević, Z.. (2023). Application of open source solutions in the realization of low-cost teaching laboratories. in ISPC «Modern information and electronic technologies»
MIET2023-Odesa-Ukraine., 36-40.
https://hdl.handle.net/21.15107/rcub_machinery_7211

Stolić P, Stanimirović Z, Stanimirović I, Jarić M, Radovanović I, Stević Z. Application of open source solutions in the realization of low-cost teaching laboratories. in ISPC «Modern information and electronic technologies». 2023;:36-40.
https://hdl.handle.net/21.15107/rcub_machinery_7211 .

Stolić, Predrag, Stanimirović, Zdravko, Stanimirović, Ivanka, Jarić, Marko, Radovanović, Ilija, Stević, Zoran, "Application of open source solutions in the realization of low-cost teaching laboratories" in ISPC «Modern information and electronic technologies» (2023):36-40,
https://hdl.handle.net/21.15107/rcub_machinery_7211 .

TY  - JOUR
AU  - Budimir, Nikola
AU  - Brat, Zagorka
AU  - Petronić, Sanja
AU  - Jarić, Marko
AU  - Jeremić, Lazar
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7208
AB  - The purpose of this paper is to present impact of the improper choice of the procedure for repairing of pressure vessel for methanol storage, which finally could leads even to its failure. Represented information are based on the results of inspection activities from one oil & gas plant. Anyhow, these kind of problems can appear in industry units which treating or using methanol for different purposes, especially in cases when residual stresses are enough significant to cause damage mechanisms and creation of cracks in pressure vessels or pipelines.
PB  - Društvo za integritet i vek konstrukcija „Prof. dr Stojan Sedmak“
T2  - Integritet i vek konstrukcija
T1  - Impact of residual stress on integrity of the vessel for methanol storing
EP  - 90
IS  - 1
SP  - 87
VL  - 23
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7208
ER  - 

@article{
author = "Budimir, Nikola and Brat, Zagorka and Petronić, Sanja and Jarić, Marko and Jeremić, Lazar",
year = "2023",
abstract = "The purpose of this paper is to present impact of the improper choice of the procedure for repairing of pressure vessel for methanol storage, which finally could leads even to its failure. Represented information are based on the results of inspection activities from one oil & gas plant. Anyhow, these kind of problems can appear in industry units which treating or using methanol for different purposes, especially in cases when residual stresses are enough significant to cause damage mechanisms and creation of cracks in pressure vessels or pipelines.",
publisher = "Društvo za integritet i vek konstrukcija „Prof. dr Stojan Sedmak“",
journal = "Integritet i vek konstrukcija",
title = "Impact of residual stress on integrity of the vessel for methanol storing",
pages = "90-87",
number = "1",
volume = "23",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7208"
}

Budimir, N., Brat, Z., Petronić, S., Jarić, M.,& Jeremić, L.. (2023). Impact of residual stress on integrity of the vessel for methanol storing. in Integritet i vek konstrukcija
Društvo za integritet i vek konstrukcija „Prof. dr Stojan Sedmak“., 23(1), 87-90.
https://hdl.handle.net/21.15107/rcub_machinery_7208

Budimir N, Brat Z, Petronić S, Jarić M, Jeremić L. Impact of residual stress on integrity of the vessel for methanol storing. in Integritet i vek konstrukcija. 2023;23(1):87-90.
https://hdl.handle.net/21.15107/rcub_machinery_7208 .

Budimir, Nikola, Brat, Zagorka, Petronić, Sanja, Jarić, Marko, Jeremić, Lazar, "Impact of residual stress on integrity of the vessel for methanol storing" in Integritet i vek konstrukcija, 23, no. 1 (2023):87-90,
https://hdl.handle.net/21.15107/rcub_machinery_7208 .

TY  - CONF
AU  - Jarić, Marko
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7213
AB  - The paper deals with the problems related to the horizontal cylindrical tank with capacity 52m3 for oil storage, which is in long time continual service. Before planned change of location necessary planned cleaning and inspection activities were performed. During inspection process cracks were observed in base metal and on internal side at reinforcement plates. Cracks were analysed and confirmed by detail visual and dye penetrant tests. Appropriate remediation documentation was prepared before starting of cracks excavation process. All cracks were fully removed which was confirmed by relevant NDT-tests. Repairing welding activities and appropriate NDE-examination tests after repairing welding process were performed. After successfully leak test, tank was transferred on the new location and put in service.
PB  - Akademija tehničkih strukovnih studija Beograd
C3  - Politehnika 2023 INTERNATIONAL SCIENTIFIC AND PROFESSIONAL CONFERENCE
T1  - Analysis of remediation of horizontal cylindrical tank for oil storage
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7213
ER  - 

@conference{
author = "Jarić, Marko",
year = "2023",
abstract = "The paper deals with the problems related to the horizontal cylindrical tank with capacity 52m3 for oil storage, which is in long time continual service. Before planned change of location necessary planned cleaning and inspection activities were performed. During inspection process cracks were observed in base metal and on internal side at reinforcement plates. Cracks were analysed and confirmed by detail visual and dye penetrant tests. Appropriate remediation documentation was prepared before starting of cracks excavation process. All cracks were fully removed which was confirmed by relevant NDT-tests. Repairing welding activities and appropriate NDE-examination tests after repairing welding process were performed. After successfully leak test, tank was transferred on the new location and put in service.",
publisher = "Akademija tehničkih strukovnih studija Beograd",
journal = "Politehnika 2023 INTERNATIONAL SCIENTIFIC AND PROFESSIONAL CONFERENCE",
title = "Analysis of remediation of horizontal cylindrical tank for oil storage",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7213"
}

Jarić, M.. (2023). Analysis of remediation of horizontal cylindrical tank for oil storage. in Politehnika 2023 INTERNATIONAL SCIENTIFIC AND PROFESSIONAL CONFERENCE
Akademija tehničkih strukovnih studija Beograd..
https://hdl.handle.net/21.15107/rcub_machinery_7213

Jarić M. Analysis of remediation of horizontal cylindrical tank for oil storage. in Politehnika 2023 INTERNATIONAL SCIENTIFIC AND PROFESSIONAL CONFERENCE. 2023;.
https://hdl.handle.net/21.15107/rcub_machinery_7213 .

Jarić, Marko, "Analysis of remediation of horizontal cylindrical tank for oil storage" in Politehnika 2023 INTERNATIONAL SCIENTIFIC AND PROFESSIONAL CONFERENCE (2023),
https://hdl.handle.net/21.15107/rcub_machinery_7213 .

TY  - CONF
AU  - Petronić, Sanja
AU  - Jarić, Marko
AU  - Budimir, Nikola
AU  - Stević, Zoran
AU  - Radovanović, Ilija
AU  - Stolić, Predrag
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7124
AB  - Storage tanks are exposed to external and internal corrosion. One successful tool for external corrosion protection is the cathodic protection system. This paper describes the cathodic protection system applied to the storage tank which works in the refinery. The cathodic protection system uses a sacrificial anode, and the measurements presented in this paper show that the anode is worn out. This paper presents a suggestion for the next step to protect the storage tank.
C3  - ISPC «Modern information and electronic technologies»
T1  - Analysis of cathodic protection system operation at the storage tanks in oil&gas industry
EP  - 83
SP  - 79
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7124
ER  - 

@conference{
author = "Petronić, Sanja and Jarić, Marko and Budimir, Nikola and Stević, Zoran and Radovanović, Ilija and Stolić, Predrag",
year = "2023",
abstract = "Storage tanks are exposed to external and internal corrosion. One successful tool for external corrosion protection is the cathodic protection system. This paper describes the cathodic protection system applied to the storage tank which works in the refinery. The cathodic protection system uses a sacrificial anode, and the measurements presented in this paper show that the anode is worn out. This paper presents a suggestion for the next step to protect the storage tank.",
journal = "ISPC «Modern information and electronic technologies»",
title = "Analysis of cathodic protection system operation at the storage tanks in oil&gas industry",
pages = "83-79",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7124"
}

Petronić, S., Jarić, M., Budimir, N., Stević, Z., Radovanović, I.,& Stolić, P.. (2023). Analysis of cathodic protection system operation at the storage tanks in oil&gas industry. in ISPC «Modern information and electronic technologies», 79-83.
https://hdl.handle.net/21.15107/rcub_machinery_7124

Petronić S, Jarić M, Budimir N, Stević Z, Radovanović I, Stolić P. Analysis of cathodic protection system operation at the storage tanks in oil&gas industry. in ISPC «Modern information and electronic technologies». 2023;:79-83.
https://hdl.handle.net/21.15107/rcub_machinery_7124 .

Petronić, Sanja, Jarić, Marko, Budimir, Nikola, Stević, Zoran, Radovanović, Ilija, Stolić, Predrag, "Analysis of cathodic protection system operation at the storage tanks in oil&gas industry" in ISPC «Modern information and electronic technologies» (2023):79-83,
https://hdl.handle.net/21.15107/rcub_machinery_7124 .

TY  - GEN
AU  - Jarić, Marko
AU  - Petronić, Sanja
AU  - Budimir, Nikola
AU  - Stević, Zoran
AU  - Polić, Suzana
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7128
AB  - Cooling towers use significant amounts of water, and the cooling system is often the most efficient energy user in a building during the cooling season. Maximizing the energy efficiency of the cooling system can be significantly improved by optimising the cleanliness of the tower heat transfer surfaces and the heat transfer surfaces of the heat exchanger cooling system. Cooling towers belong to the group of contact heat exchangers, and they are an integral part of almost every process plant, which failure can produce long-term downtime and significant material losses. Bearing in mind this fact, it is necessary to check electric motor, the fan and its components in a reliable way in order to ensure the required continuity of the process in the appropriate period of time. Previously methods of checking fan parts in accordance with the manufacturer's manuals included only visual inspection of the fan blades and checking the tightening torque of the blades for their holders. The mentioned methods have proven ineffective and insufficient from the point of view of maintenance of process plants during working life, which has led to the fan's failure and the blade holder's breakage at the point of connection with the blade. Hence, for the needs of appropriate maintenance, new methods for assessing the condition of fan blade holders have been established, which include the application of conventional non-destructive methods for the assessment of surface and volumetric defects of blade holders. The mentioned method of checking the blade holders has presented in detail in this paper.
PB  - SMEITS
T2  - 11th International Conference on Renewable Electrical Power Sources
T1  - Non-destructive methods and improvement of the cooling tower operation reliability, as an aspect of renewable energy sources thematization
EP  - 43
SP  - 35
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7128
ER  - 

@misc{
author = "Jarić, Marko and Petronić, Sanja and Budimir, Nikola and Stević, Zoran and Polić, Suzana",
year = "2023",
abstract = "Cooling towers use significant amounts of water, and the cooling system is often the most efficient energy user in a building during the cooling season. Maximizing the energy efficiency of the cooling system can be significantly improved by optimising the cleanliness of the tower heat transfer surfaces and the heat transfer surfaces of the heat exchanger cooling system. Cooling towers belong to the group of contact heat exchangers, and they are an integral part of almost every process plant, which failure can produce long-term downtime and significant material losses. Bearing in mind this fact, it is necessary to check electric motor, the fan and its components in a reliable way in order to ensure the required continuity of the process in the appropriate period of time. Previously methods of checking fan parts in accordance with the manufacturer's manuals included only visual inspection of the fan blades and checking the tightening torque of the blades for their holders. The mentioned methods have proven ineffective and insufficient from the point of view of maintenance of process plants during working life, which has led to the fan's failure and the blade holder's breakage at the point of connection with the blade. Hence, for the needs of appropriate maintenance, new methods for assessing the condition of fan blade holders have been established, which include the application of conventional non-destructive methods for the assessment of surface and volumetric defects of blade holders. The mentioned method of checking the blade holders has presented in detail in this paper.",
publisher = "SMEITS",
journal = "11th International Conference on Renewable Electrical Power Sources",
title = "Non-destructive methods and improvement of the cooling tower operation reliability, as an aspect of renewable energy sources thematization",
pages = "43-35",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7128"
}

Jarić, M., Petronić, S., Budimir, N., Stević, Z.,& Polić, S.. (2023). Non-destructive methods and improvement of the cooling tower operation reliability, as an aspect of renewable energy sources thematization. in 11th International Conference on Renewable Electrical Power Sources
SMEITS., 35-43.
https://hdl.handle.net/21.15107/rcub_machinery_7128

Jarić M, Petronić S, Budimir N, Stević Z, Polić S. Non-destructive methods and improvement of the cooling tower operation reliability, as an aspect of renewable energy sources thematization. in 11th International Conference on Renewable Electrical Power Sources. 2023;:35-43.
https://hdl.handle.net/21.15107/rcub_machinery_7128 .

Jarić, Marko, Petronić, Sanja, Budimir, Nikola, Stević, Zoran, Polić, Suzana, "Non-destructive methods and improvement of the cooling tower operation reliability, as an aspect of renewable energy sources thematization" in 11th International Conference on Renewable Electrical Power Sources (2023):35-43,
https://hdl.handle.net/21.15107/rcub_machinery_7128 .

TY  - CONF
AU  - Jarić, Marko
AU  - Petronić, Sanja
AU  - Budimir, Nikola
AU  - Rajčić, Boris
AU  - Stević, Zoran
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7127
AB  - The collector for impurities is a temporary tank that collects condensate from the condenser after oil purification process.. Large-scale distillation towers use a reflux system to achieve more complete product separation. The collector, or accumulator, serves as a distribution point for reflux and distillate. This paper deals with a collector that uses water and light hydrocarbons  as a working fluid, and is designed to operate under a pressure of 12 bar and a temperature of up to 91° C. Considering the working fluid, and work at elevated pressure, it belongs to the category of pressure vessels of a high level of danger. Its maintenance and regular inspection are a mandatory step in the prevention of failures and/or accident, and thus also in the protection of people and the environment. The paper describes tests of collector for impurities after oil purification and their importance; including a liquid penetrate inspection, ultrasonic measurement and visual inspection. Corrosion rate that occurs during the interaction of the working medium and the material of the collector was estimated such as and appropriate remaining working life. RBI analysis is performed.
PB  - University of Banja Luka Faculty of Mechanical Engineering
C3  - 16th International Conference on Accomplishments in Mechanical and	Industrial Engineering DEMI 2023
T1  - Importance of examination of collector for impurities after oil purification for human and environmental safety
EP  - 482
SP  - 477
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7127
ER  - 

@conference{
author = "Jarić, Marko and Petronić, Sanja and Budimir, Nikola and Rajčić, Boris and Stević, Zoran",
year = "2023",
abstract = "The collector for impurities is a temporary tank that collects condensate from the condenser after oil purification process.. Large-scale distillation towers use a reflux system to achieve more complete product separation. The collector, or accumulator, serves as a distribution point for reflux and distillate. This paper deals with a collector that uses water and light hydrocarbons  as a working fluid, and is designed to operate under a pressure of 12 bar and a temperature of up to 91° C. Considering the working fluid, and work at elevated pressure, it belongs to the category of pressure vessels of a high level of danger. Its maintenance and regular inspection are a mandatory step in the prevention of failures and/or accident, and thus also in the protection of people and the environment. The paper describes tests of collector for impurities after oil purification and their importance; including a liquid penetrate inspection, ultrasonic measurement and visual inspection. Corrosion rate that occurs during the interaction of the working medium and the material of the collector was estimated such as and appropriate remaining working life. RBI analysis is performed.",
publisher = "University of Banja Luka Faculty of Mechanical Engineering",
journal = "16th International Conference on Accomplishments in Mechanical and	Industrial Engineering DEMI 2023",
title = "Importance of examination of collector for impurities after oil purification for human and environmental safety",
pages = "482-477",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7127"
}

Jarić, M., Petronić, S., Budimir, N., Rajčić, B.,& Stević, Z.. (2023). Importance of examination of collector for impurities after oil purification for human and environmental safety. in 16th International Conference on Accomplishments in Mechanical and	Industrial Engineering DEMI 2023
University of Banja Luka Faculty of Mechanical Engineering., 477-482.
https://hdl.handle.net/21.15107/rcub_machinery_7127

Jarić M, Petronić S, Budimir N, Rajčić B, Stević Z. Importance of examination of collector for impurities after oil purification for human and environmental safety. in 16th International Conference on Accomplishments in Mechanical and	Industrial Engineering DEMI 2023. 2023;:477-482.
https://hdl.handle.net/21.15107/rcub_machinery_7127 .

Jarić, Marko, Petronić, Sanja, Budimir, Nikola, Rajčić, Boris, Stević, Zoran, "Importance of examination of collector for impurities after oil purification for human and environmental safety" in 16th International Conference on Accomplishments in Mechanical and	Industrial Engineering DEMI 2023 (2023):477-482,
https://hdl.handle.net/21.15107/rcub_machinery_7127 .

TY  - CONF
AU  - Stolić, Predrag
AU  - Stanimirović, Zdravko
AU  - Stanimirović, Ivanka
AU  - Jarić, Marko
AU  - Radovanović, Ilija
AU  - Stević, Zoran
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7123
AB  - Teaching in engineering study programs includes practice that often takes place in laboratories. The implementation of
these laboratories is often accompanied by certain limitations and complexities. This paper will show how some of
these problems can be overcome by using open source solutions on the example of one such laboratory for basic and
master academic studies in the mining engineering program, where students are given practical skills in of working
with sensors, process monitoring, and similar activities.
C3  - ISPC «Modern information and electronic technologies»
T1  - Application of open source solutions in the realization of low cost teaching laboratories
EP  - 39
SP  - 36
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7123
ER  - 

@conference{
author = "Stolić, Predrag and Stanimirović, Zdravko and Stanimirović, Ivanka and Jarić, Marko and Radovanović, Ilija and Stević, Zoran",
year = "2023",
abstract = "Teaching in engineering study programs includes practice that often takes place in laboratories. The implementation of
these laboratories is often accompanied by certain limitations and complexities. This paper will show how some of
these problems can be overcome by using open source solutions on the example of one such laboratory for basic and
master academic studies in the mining engineering program, where students are given practical skills in of working
with sensors, process monitoring, and similar activities.",
journal = "ISPC «Modern information and electronic technologies»",
title = "Application of open source solutions in the realization of low cost teaching laboratories",
pages = "39-36",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7123"
}

Stolić, P., Stanimirović, Z., Stanimirović, I., Jarić, M., Radovanović, I.,& Stević, Z.. (2023). Application of open source solutions in the realization of low cost teaching laboratories. in ISPC «Modern information and electronic technologies», 36-39.
https://hdl.handle.net/21.15107/rcub_machinery_7123

Stolić P, Stanimirović Z, Stanimirović I, Jarić M, Radovanović I, Stević Z. Application of open source solutions in the realization of low cost teaching laboratories. in ISPC «Modern information and electronic technologies». 2023;:36-39.
https://hdl.handle.net/21.15107/rcub_machinery_7123 .

Stolić, Predrag, Stanimirović, Zdravko, Stanimirović, Ivanka, Jarić, Marko, Radovanović, Ilija, Stević, Zoran, "Application of open source solutions in the realization of low cost teaching laboratories" in ISPC «Modern information and electronic technologies» (2023):36-39,
https://hdl.handle.net/21.15107/rcub_machinery_7123 .

TY  - CONF
AU  - Polić, Suzana
AU  - Petronić, Sanja
AU  - Jarić, Marko
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7129
AB  - By considering new studies on the possibility of implementing smart materials in museum-gallery
spaces which give the context for some modern models of functioning renewable energy sources,
this paper examines the universality of descriptions such context. Methodologically, in the use of an
analytical apparatus on the relation principle of Ars Inveniendi – Ars Combinatoria, the work is
inspired by Leibniz's philosophical ideas.
AB  - Razmatranjem novih studija o mogućnost primene smart materijala u muzejsko-galerijskim
prostorima koji daju kontekst za neke savremene modele funkcionalizacije obnovljivih izvora
energije, u ovom radu ispituje se univerzalnost deskripcije takvog konteksta. Metodološki, u
korišćenju analitičkog aparata na relaciji principa Ars Inveniendi – Ars Combinatoria, rad je
inspirisan Lajbnicovim filozofskim idejama.
PB  - SMEITS
C3  - 11th International Conference on Renewable Electrical Power Sources
T1  - Smart materials and contemporary context for the functionalization of renewable energy sources in the gallery space
EP  - 194
SP  - 185
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7129
ER  - 

@conference{
author = "Polić, Suzana and Petronić, Sanja and Jarić, Marko",
year = "2023",
abstract = "By considering new studies on the possibility of implementing smart materials in museum-gallery
spaces which give the context for some modern models of functioning renewable energy sources,
this paper examines the universality of descriptions such context. Methodologically, in the use of an
analytical apparatus on the relation principle of Ars Inveniendi – Ars Combinatoria, the work is
inspired by Leibniz's philosophical ideas., Razmatranjem novih studija o mogućnost primene smart materijala u muzejsko-galerijskim
prostorima koji daju kontekst za neke savremene modele funkcionalizacije obnovljivih izvora
energije, u ovom radu ispituje se univerzalnost deskripcije takvog konteksta. Metodološki, u
korišćenju analitičkog aparata na relaciji principa Ars Inveniendi – Ars Combinatoria, rad je
inspirisan Lajbnicovim filozofskim idejama.",
publisher = "SMEITS",
journal = "11th International Conference on Renewable Electrical Power Sources",
title = "Smart materials and contemporary context for the functionalization of renewable energy sources in the gallery space",
pages = "194-185",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7129"
}

Polić, S., Petronić, S.,& Jarić, M.. (2023). Smart materials and contemporary context for the functionalization of renewable energy sources in the gallery space. in 11th International Conference on Renewable Electrical Power Sources
SMEITS., 185-194.
https://hdl.handle.net/21.15107/rcub_machinery_7129

Polić S, Petronić S, Jarić M. Smart materials and contemporary context for the functionalization of renewable energy sources in the gallery space. in 11th International Conference on Renewable Electrical Power Sources. 2023;:185-194.
https://hdl.handle.net/21.15107/rcub_machinery_7129 .

Polić, Suzana, Petronić, Sanja, Jarić, Marko, "Smart materials and contemporary context for the functionalization of renewable energy sources in the gallery space" in 11th International Conference on Renewable Electrical Power Sources (2023):185-194,
https://hdl.handle.net/21.15107/rcub_machinery_7129 .

TY  - CONF
AU  - Polić, Suzana
AU  - Petronić, Sanja
AU  - Jarić, Marko
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7138
AB  - The use of ChatGPT possibilities in collecting relevant scientific information, at this phase of
technological development shows the multi-layered of the problem of valorization of scientific
sources. In this paper, the results of preliminary research on the development of knowledge on the
sources of renewable energy have been presented through time, in the still unrealized space of
heritological matter. Our case study refers to a scientific work „Le vide, l'énergie et la matière: Un
essai de physique théorique“ by Gérard Berger.
PB  - SMEITS
C3  - 11th International Conference on Renewable Electrical Power Sources
T1  - Chatgpt materials and renewable energy sources: one unrealized space
EP  - 277
SP  - 269
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7138
ER  - 

@conference{
author = "Polić, Suzana and Petronić, Sanja and Jarić, Marko",
year = "2023",
abstract = "The use of ChatGPT possibilities in collecting relevant scientific information, at this phase of
technological development shows the multi-layered of the problem of valorization of scientific
sources. In this paper, the results of preliminary research on the development of knowledge on the
sources of renewable energy have been presented through time, in the still unrealized space of
heritological matter. Our case study refers to a scientific work „Le vide, l'énergie et la matière: Un
essai de physique théorique“ by Gérard Berger.",
publisher = "SMEITS",
journal = "11th International Conference on Renewable Electrical Power Sources",
title = "Chatgpt materials and renewable energy sources: one unrealized space",
pages = "277-269",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7138"
}

Polić, S., Petronić, S.,& Jarić, M.. (2023). Chatgpt materials and renewable energy sources: one unrealized space. in 11th International Conference on Renewable Electrical Power Sources
SMEITS., 269-277.
https://hdl.handle.net/21.15107/rcub_machinery_7138

Polić S, Petronić S, Jarić M. Chatgpt materials and renewable energy sources: one unrealized space. in 11th International Conference on Renewable Electrical Power Sources. 2023;:269-277.
https://hdl.handle.net/21.15107/rcub_machinery_7138 .

Polić, Suzana, Petronić, Sanja, Jarić, Marko, "Chatgpt materials and renewable energy sources: one unrealized space" in 11th International Conference on Renewable Electrical Power Sources (2023):269-277,
https://hdl.handle.net/21.15107/rcub_machinery_7138 .

TY  - CONF
AU  - Polić, Suzana
AU  - Petronić, Sanja
AU  - Stević, Zoran
AU  - Jarić, Marko
PY  - 2022
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7120
AB  - Contemporary Museum Practice, which in the process of musealization of renewable energy,
emphasizes ideas, and then exhibits, is suitable for museum contextualization of solar energy. Given
the development of ideas on using this type of energy, the subject of research is The Collection of
Museum of Solar Energy, in the context of protection of cultural heritage. Within the review of the
methodological, scientific and educational aspects of this museum, with a comparative analysis of
the concept of Frances Young Tang Teaching Museum, we propose the possible development of the
museum as a real and virtual space to acquire formative experience in working with solar energy.
PB  - SMEITS
C3  - 10th International Conference on Renewable Electrical Power Sources
T1  - Contemporary musealization and collection of museum of solar energy
EP  - 76
SP  - 69
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7120
ER  - 

@conference{
author = "Polić, Suzana and Petronić, Sanja and Stević, Zoran and Jarić, Marko",
year = "2022",
abstract = "Contemporary Museum Practice, which in the process of musealization of renewable energy,
emphasizes ideas, and then exhibits, is suitable for museum contextualization of solar energy. Given
the development of ideas on using this type of energy, the subject of research is The Collection of
Museum of Solar Energy, in the context of protection of cultural heritage. Within the review of the
methodological, scientific and educational aspects of this museum, with a comparative analysis of
the concept of Frances Young Tang Teaching Museum, we propose the possible development of the
museum as a real and virtual space to acquire formative experience in working with solar energy.",
publisher = "SMEITS",
journal = "10th International Conference on Renewable Electrical Power Sources",
title = "Contemporary musealization and collection of museum of solar energy",
pages = "76-69",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7120"
}

Polić, S., Petronić, S., Stević, Z.,& Jarić, M.. (2022). Contemporary musealization and collection of museum of solar energy. in 10th International Conference on Renewable Electrical Power Sources
SMEITS., 69-76.
https://hdl.handle.net/21.15107/rcub_machinery_7120

Polić S, Petronić S, Stević Z, Jarić M. Contemporary musealization and collection of museum of solar energy. in 10th International Conference on Renewable Electrical Power Sources. 2022;:69-76.
https://hdl.handle.net/21.15107/rcub_machinery_7120 .

Polić, Suzana, Petronić, Sanja, Stević, Zoran, Jarić, Marko, "Contemporary musealization and collection of museum of solar energy" in 10th International Conference on Renewable Electrical Power Sources (2022):69-76,
https://hdl.handle.net/21.15107/rcub_machinery_7120 .

TY  - CONF
AU  - Jarić, Marko
AU  - Petronić, Sanja
AU  - Budimir, Nikola
AU  - Polić, Suzana
AU  - Čolić, Katarina
PY  - 2022
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7119
AB  - The paper shows preparation of inspection plan for air cooled heat exchanger in refinery. The
importance of proper inspection, traceable prepared plan of inspection is discussed. The inspection of heat exchanger, according to the presented plan, includes visual testing - internal and external, ultrasound testing and liquid penetrate testing. The inspection plan is essential for maintenance the pressure equipment in refineries and is performed according to API 572 and API 510. The inspection of air cooled heat exchanger shows satisfactorily results.
PB  - University of Novi Sad Technical Faculty “Mihajlo Pupin” Zrenjanin, Republic of Serbia
C3  - XII International Conference Industrial Engineering and Environmental Protection 2022 (IIZS 2022) October 06-07, 2022, Zrenjanin, Serbia
T1  - ANALYSIS OF INSPECTION PLAN OF AIR COOLED HEAT EXCHANGER FOR NEEDS OF MAINTANCE AND SAFETY OF OIL&GAS PLANTS
EP  - 156
SP  - 150
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7119
ER  - 

@conference{
author = "Jarić, Marko and Petronić, Sanja and Budimir, Nikola and Polić, Suzana and Čolić, Katarina",
year = "2022",
abstract = "The paper shows preparation of inspection plan for air cooled heat exchanger in refinery. The
importance of proper inspection, traceable prepared plan of inspection is discussed. The inspection of heat exchanger, according to the presented plan, includes visual testing - internal and external, ultrasound testing and liquid penetrate testing. The inspection plan is essential for maintenance the pressure equipment in refineries and is performed according to API 572 and API 510. The inspection of air cooled heat exchanger shows satisfactorily results.",
publisher = "University of Novi Sad Technical Faculty “Mihajlo Pupin” Zrenjanin, Republic of Serbia",
journal = "XII International Conference Industrial Engineering and Environmental Protection 2022 (IIZS 2022) October 06-07, 2022, Zrenjanin, Serbia",
title = "ANALYSIS OF INSPECTION PLAN OF AIR COOLED HEAT EXCHANGER FOR NEEDS OF MAINTANCE AND SAFETY OF OIL&GAS PLANTS",
pages = "156-150",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7119"
}

Jarić, M., Petronić, S., Budimir, N., Polić, S.,& Čolić, K.. (2022). ANALYSIS OF INSPECTION PLAN OF AIR COOLED HEAT EXCHANGER FOR NEEDS OF MAINTANCE AND SAFETY OF OIL&GAS PLANTS. in XII International Conference Industrial Engineering and Environmental Protection 2022 (IIZS 2022) October 06-07, 2022, Zrenjanin, Serbia
University of Novi Sad Technical Faculty “Mihajlo Pupin” Zrenjanin, Republic of Serbia., 150-156.
https://hdl.handle.net/21.15107/rcub_machinery_7119

Jarić M, Petronić S, Budimir N, Polić S, Čolić K. ANALYSIS OF INSPECTION PLAN OF AIR COOLED HEAT EXCHANGER FOR NEEDS OF MAINTANCE AND SAFETY OF OIL&GAS PLANTS. in XII International Conference Industrial Engineering and Environmental Protection 2022 (IIZS 2022) October 06-07, 2022, Zrenjanin, Serbia. 2022;:150-156.
https://hdl.handle.net/21.15107/rcub_machinery_7119 .

Jarić, Marko, Petronić, Sanja, Budimir, Nikola, Polić, Suzana, Čolić, Katarina, "ANALYSIS OF INSPECTION PLAN OF AIR COOLED HEAT EXCHANGER FOR NEEDS OF MAINTANCE AND SAFETY OF OIL&GAS PLANTS" in XII International Conference Industrial Engineering and Environmental Protection 2022 (IIZS 2022) October 06-07, 2022, Zrenjanin, Serbia (2022):150-156,
https://hdl.handle.net/21.15107/rcub_machinery_7119 .

TY  - CONF
AU  - Jarić, Marko
AU  - Petronić, Sanja
AU  - Polić, Suzana
AU  - Čolić, Katarina
AU  - Brat, Zagorka
PY  - 2022
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7121
AB  - Plant for oil stabilisation is enable to recovery and commercial exploitation of oil which is
rectified from excavated raw gas. Condensed hot liquid hydrocarbons that are separated from natural gas can be used to heat the fluid that enters the process in which it is separated into liquid and
lighter components. This paper presents the inspection of an oil heat exchanger and explains the
importance of inspection regarding sustainable development and environmental protection. The
thickness of the material was measured by ultrasonic technique. Determination of corrosion rate
and remaining life of oil-oil shell and tube heat exchanger is performed according to the API 510
and API 572 standards. The visual test revealed some mechanical damages and surface corrosion;
a liquid penetrant inspection method showed no cracks at the time of inspection
AB  - Postrojenja za stabilizaciju nafte omogućavaju rekuperaciju i komercijalnu eksploataciju
nafte koja se izdvaja iz gasa dopremljenog iz buštoine. Kondenzovani topli tečni ugljovodonici koji
su prečišćeni iz prirodnog gasa mogu se koristiti za zagrevanje fluida koji dolazi u proces u kome
se vrši njegovo razdvajanje na lakše i tečne komponente. U radu je prikazan pregled razmenjivača
toplote nafta-nafta i objašnjen značaj inspekcije u pogledu održivog razvoja i zaštite životne sredine. Debljina materijala merena je ultrazvučnom tehnikom. Određivanje stepena korozije i preostalog radnog veka razmenjivača toplote izvršeni su prema API 510 I API 572 standardu. Vizuelni
test je otkrio određena mehanička oštećenja i površinsku koroziju, metoda inspekcije penetrantskim
metodama nije detektovala prsline u zavarenim spojevima u vreme pregleda.
PB  - SMEITS
C3  - 10th International Conference on Renewable Electrical Power Sources
T1  - Importance of inspection of the oil-oil shell and tube heat exchanger for needs of sustainable development and environmental protection
EP  - 164
SP  - 157
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7121
ER  - 

@conference{
author = "Jarić, Marko and Petronić, Sanja and Polić, Suzana and Čolić, Katarina and Brat, Zagorka",
year = "2022",
abstract = "Plant for oil stabilisation is enable to recovery and commercial exploitation of oil which is
rectified from excavated raw gas. Condensed hot liquid hydrocarbons that are separated from natural gas can be used to heat the fluid that enters the process in which it is separated into liquid and
lighter components. This paper presents the inspection of an oil heat exchanger and explains the
importance of inspection regarding sustainable development and environmental protection. The
thickness of the material was measured by ultrasonic technique. Determination of corrosion rate
and remaining life of oil-oil shell and tube heat exchanger is performed according to the API 510
and API 572 standards. The visual test revealed some mechanical damages and surface corrosion;
a liquid penetrant inspection method showed no cracks at the time of inspection, Postrojenja za stabilizaciju nafte omogućavaju rekuperaciju i komercijalnu eksploataciju
nafte koja se izdvaja iz gasa dopremljenog iz buštoine. Kondenzovani topli tečni ugljovodonici koji
su prečišćeni iz prirodnog gasa mogu se koristiti za zagrevanje fluida koji dolazi u proces u kome
se vrši njegovo razdvajanje na lakše i tečne komponente. U radu je prikazan pregled razmenjivača
toplote nafta-nafta i objašnjen značaj inspekcije u pogledu održivog razvoja i zaštite životne sredine. Debljina materijala merena je ultrazvučnom tehnikom. Određivanje stepena korozije i preostalog radnog veka razmenjivača toplote izvršeni su prema API 510 I API 572 standardu. Vizuelni
test je otkrio određena mehanička oštećenja i površinsku koroziju, metoda inspekcije penetrantskim
metodama nije detektovala prsline u zavarenim spojevima u vreme pregleda.",
publisher = "SMEITS",
journal = "10th International Conference on Renewable Electrical Power Sources",
title = "Importance of inspection of the oil-oil shell and tube heat exchanger for needs of sustainable development and environmental protection",
pages = "164-157",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7121"
}

Jarić, M., Petronić, S., Polić, S., Čolić, K.,& Brat, Z.. (2022). Importance of inspection of the oil-oil shell and tube heat exchanger for needs of sustainable development and environmental protection. in 10th International Conference on Renewable Electrical Power Sources
SMEITS., 157-164.
https://hdl.handle.net/21.15107/rcub_machinery_7121

Jarić M, Petronić S, Polić S, Čolić K, Brat Z. Importance of inspection of the oil-oil shell and tube heat exchanger for needs of sustainable development and environmental protection. in 10th International Conference on Renewable Electrical Power Sources. 2022;:157-164.
https://hdl.handle.net/21.15107/rcub_machinery_7121 .

Jarić, Marko, Petronić, Sanja, Polić, Suzana, Čolić, Katarina, Brat, Zagorka, "Importance of inspection of the oil-oil shell and tube heat exchanger for needs of sustainable development and environmental protection" in 10th International Conference on Renewable Electrical Power Sources (2022):157-164,
https://hdl.handle.net/21.15107/rcub_machinery_7121 .

TY  - CONF
AU  - Polić, Suzana
AU  - Petronić, Sanja
AU  - Stević, Zoran
AU  - Jarić, Marko
PY  - 2022
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7122
AB  - Along with the development of renewable energy research, in recent years, develop and a modern energy paradigm in relation to various aspects of the application of these sources, or energy
transition. Philosophical aspects relate to the specifics of new perspectives on observation of problems and ways of resonating within the technophilosophical tradition, as well as in the context of the
contemporary circumstances of the using renewable sources of energy. Heritological dimension gives
focus on the preservation of civilizational values and ethical behavior. In this paper, the focus is a
heritological-philosophical idea present in modern academic practice.
AB  - Uporedo sa razvojem istraživanja obnovljivih izvora energije, poslednjih godina razvija se i
moderna energetska paradigma u vezi sa različitim aspektima primene ovih izvora, odnosno energetske tranzicije. Filozofski aspekti odnose se na specifičnosti novih perspektiva posmatranja problema i načina rezonovanja u okviru tehnofilozofske tradicije, kao i u kontekstu savremenih okolnosti
primene obnovljivih izvora energije. Heritološku dimenziju daje usmerenost na očuvanje civilizacijskih vrednosti i etičko ponašanje. U ovom radu u fokusu su heritološko-filozofske ideje prisutne
u savremenoj akademskoj praksi.
C3  - 10th International Conference on Renewable Electrical Power Sources
T1  - Heritological-philosophical ideas in the research of the renewable energy sources implementation
EP  - 172
SP  - 165
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7122
ER  - 

@conference{
author = "Polić, Suzana and Petronić, Sanja and Stević, Zoran and Jarić, Marko",
year = "2022",
abstract = "Along with the development of renewable energy research, in recent years, develop and a modern energy paradigm in relation to various aspects of the application of these sources, or energy
transition. Philosophical aspects relate to the specifics of new perspectives on observation of problems and ways of resonating within the technophilosophical tradition, as well as in the context of the
contemporary circumstances of the using renewable sources of energy. Heritological dimension gives
focus on the preservation of civilizational values and ethical behavior. In this paper, the focus is a
heritological-philosophical idea present in modern academic practice., Uporedo sa razvojem istraživanja obnovljivih izvora energije, poslednjih godina razvija se i
moderna energetska paradigma u vezi sa različitim aspektima primene ovih izvora, odnosno energetske tranzicije. Filozofski aspekti odnose se na specifičnosti novih perspektiva posmatranja problema i načina rezonovanja u okviru tehnofilozofske tradicije, kao i u kontekstu savremenih okolnosti
primene obnovljivih izvora energije. Heritološku dimenziju daje usmerenost na očuvanje civilizacijskih vrednosti i etičko ponašanje. U ovom radu u fokusu su heritološko-filozofske ideje prisutne
u savremenoj akademskoj praksi.",
journal = "10th International Conference on Renewable Electrical Power Sources",
title = "Heritological-philosophical ideas in the research of the renewable energy sources implementation",
pages = "172-165",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7122"
}

Polić, S., Petronić, S., Stević, Z.,& Jarić, M.. (2022). Heritological-philosophical ideas in the research of the renewable energy sources implementation. in 10th International Conference on Renewable Electrical Power Sources, 165-172.
https://hdl.handle.net/21.15107/rcub_machinery_7122

Polić S, Petronić S, Stević Z, Jarić M. Heritological-philosophical ideas in the research of the renewable energy sources implementation. in 10th International Conference on Renewable Electrical Power Sources. 2022;:165-172.
https://hdl.handle.net/21.15107/rcub_machinery_7122 .

Polić, Suzana, Petronić, Sanja, Stević, Zoran, Jarić, Marko, "Heritological-philosophical ideas in the research of the renewable energy sources implementation" in 10th International Conference on Renewable Electrical Power Sources (2022):165-172,
https://hdl.handle.net/21.15107/rcub_machinery_7122 .

Stević, Z., Šibalija, T., Petronić, S., Milovanović, D.,& Jarić, M.. (2021). Projektovanje parametara laserskog bušenja i sečenja superlegure nikla pomoću algoritma optimizacije rojem čestica. in Ministarsvo prosvete, nauke i tehnološkog razvoja
Ministarsvo prosvete, nauke i tehnološkog razvoja.(TP0110-033/2021).
https://hdl.handle.net/21.15107/rcub_machinery_7205

Stević Z, Šibalija T, Petronić S, Milovanović D, Jarić M. Projektovanje parametara laserskog bušenja i sečenja superlegure nikla pomoću algoritma optimizacije rojem čestica. in Ministarsvo prosvete, nauke i tehnološkog razvoja. 2021;(TP0110-033/2021).
https://hdl.handle.net/21.15107/rcub_machinery_7205 .

Stević, Zoran, Šibalija, Tatjana, Petronić, Sanja, Milovanović, Dubravka, Jarić, Marko, "Projektovanje parametara laserskog bušenja i sečenja superlegure nikla pomoću algoritma optimizacije rojem čestica" in Ministarsvo prosvete, nauke i tehnološkog razvoja, no. TP0110-033/2021 (2021),
https://hdl.handle.net/21.15107/rcub_machinery_7205 .

TY  - PAT
AU  - Maksimović, Stevan
AU  - Maksimović, Mirko
AU  - Maksimović-Vasović, Ivana
AU  - Maksimović, Katarina
AU  - Jarić, Marko
PY  - 2021
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7204
AB  - Kompozitni segment lopatice glavnog rotora helikoptera HT40
PB  - Glasnik intelektualne svojine
T2  - Glasnik intelektualne svojine
T1  - Composite segment of main rotor blade of the helicopter HT40
VL  - 11
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7204
ER  - 

@misc{
author = "Maksimović, Stevan and Maksimović, Mirko and Maksimović-Vasović, Ivana and Maksimović, Katarina and Jarić, Marko",
year = "2021",
abstract = "Kompozitni segment lopatice glavnog rotora helikoptera HT40",
publisher = "Glasnik intelektualne svojine",
journal = "Glasnik intelektualne svojine",
title = "Composite segment of main rotor blade of the helicopter HT40",
volume = "11",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7204"
}

Maksimović, S., Maksimović, M., Maksimović-Vasović, I., Maksimović, K.,& Jarić, M.. (2021). Composite segment of main rotor blade of the helicopter HT40. in Glasnik intelektualne svojine
Glasnik intelektualne svojine., 11.
https://hdl.handle.net/21.15107/rcub_machinery_7204

Maksimović S, Maksimović M, Maksimović-Vasović I, Maksimović K, Jarić M. Composite segment of main rotor blade of the helicopter HT40. in Glasnik intelektualne svojine. 2021;11.
https://hdl.handle.net/21.15107/rcub_machinery_7204 .

Maksimović, Stevan, Maksimović, Mirko, Maksimović-Vasović, Ivana, Maksimović, Katarina, Jarić, Marko, "Composite segment of main rotor blade of the helicopter HT40" in Glasnik intelektualne svojine, 11 (2021),
https://hdl.handle.net/21.15107/rcub_machinery_7204 .

TY  - CONF
AU  - Jarić, Marko
AU  - Petronić, Sanja
AU  - Marković, Sasa
AU  - Trninić, Marta
AU  - Polić, Suzana
PY  - 2021
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7118
AB  - The oil platform is a large structure with facilities for drilling wells for exploration, extraction,
storage and refining of oil and natural gas lying in rock formations under the seabed. Offshore drilling poses environmental challenges. Although, fortunately, there have not been many accidents on oil platforms, the damage that occurs is enormous, both in human and material terms, and in terms of environmental protection. For that reason, the inspection of pressure equipment is of great importance. The risk to the pipeline in service can be failure due to material degradation. One of the typical mechanisms of material degradation is corrosion. This paper will present the importance of inspection of pressure equipment. On a concrete, practical example, pipeline inspection and determination of corrosion rate and remaining life will be presented in order to prevent failures and material and human losses.
PB  - SMEITS
C3  - Proceedings 9th International Conference on Renewable Electrical Power Sources
T1  - Importance of inspection and determination of remaining life of pipeline in oil platform
EP  - 304
SP  - 299
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7118
ER  - 

@conference{
author = "Jarić, Marko and Petronić, Sanja and Marković, Sasa and Trninić, Marta and Polić, Suzana",
year = "2021",
abstract = "The oil platform is a large structure with facilities for drilling wells for exploration, extraction,
storage and refining of oil and natural gas lying in rock formations under the seabed. Offshore drilling poses environmental challenges. Although, fortunately, there have not been many accidents on oil platforms, the damage that occurs is enormous, both in human and material terms, and in terms of environmental protection. For that reason, the inspection of pressure equipment is of great importance. The risk to the pipeline in service can be failure due to material degradation. One of the typical mechanisms of material degradation is corrosion. This paper will present the importance of inspection of pressure equipment. On a concrete, practical example, pipeline inspection and determination of corrosion rate and remaining life will be presented in order to prevent failures and material and human losses.",
publisher = "SMEITS",
journal = "Proceedings 9th International Conference on Renewable Electrical Power Sources",
title = "Importance of inspection and determination of remaining life of pipeline in oil platform",
pages = "304-299",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7118"
}

Jarić, M., Petronić, S., Marković, S., Trninić, M.,& Polić, S.. (2021). Importance of inspection and determination of remaining life of pipeline in oil platform. in Proceedings 9th International Conference on Renewable Electrical Power Sources
SMEITS., 299-304.
https://hdl.handle.net/21.15107/rcub_machinery_7118

Jarić M, Petronić S, Marković S, Trninić M, Polić S. Importance of inspection and determination of remaining life of pipeline in oil platform. in Proceedings 9th International Conference on Renewable Electrical Power Sources. 2021;:299-304.
https://hdl.handle.net/21.15107/rcub_machinery_7118 .

Jarić, Marko, Petronić, Sanja, Marković, Sasa, Trninić, Marta, Polić, Suzana, "Importance of inspection and determination of remaining life of pipeline in oil platform" in Proceedings 9th International Conference on Renewable Electrical Power Sources (2021):299-304,
https://hdl.handle.net/21.15107/rcub_machinery_7118 .

TY  - CONF
AU  - Milosavljević, Anđelka
AU  - Polić, Suzana
AU  - Petronić, Sanja
AU  - Jarić, Marko
PY  - 2021
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7117
AB  - Hermeneutic and polytechnic views on the technologically shaped existence of modern man
intersect in the polytechnic museum environment, in terms of symbolic sublimation. In this paper, the
subject of research are operational and technical aspects of the presentation of conceptual positions
in the creation of museum representations of polytechnics, in which the central issue is the conceptual application in the visual presentation of machine parts or elements, and machines as a whole. Two studies from the Polytechnic Museum in Moscow are presented, which characterize different technological approaches in the materialization of polytechnic thinking about the technological universe of four civilization.
PB  - SMEITS
C3  - Proceedings 9th International Conference on Renewable Electrical Power Sources
T1  - Hermeneutics and visual performance of polytechnical thinking
EP  - 298
SP  - 291
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7117
ER  - 

@conference{
author = "Milosavljević, Anđelka and Polić, Suzana and Petronić, Sanja and Jarić, Marko",
year = "2021",
abstract = "Hermeneutic and polytechnic views on the technologically shaped existence of modern man
intersect in the polytechnic museum environment, in terms of symbolic sublimation. In this paper, the
subject of research are operational and technical aspects of the presentation of conceptual positions
in the creation of museum representations of polytechnics, in which the central issue is the conceptual application in the visual presentation of machine parts or elements, and machines as a whole. Two studies from the Polytechnic Museum in Moscow are presented, which characterize different technological approaches in the materialization of polytechnic thinking about the technological universe of four civilization.",
publisher = "SMEITS",
journal = "Proceedings 9th International Conference on Renewable Electrical Power Sources",
title = "Hermeneutics and visual performance of polytechnical thinking",
pages = "298-291",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7117"
}

Milosavljević, A., Polić, S., Petronić, S.,& Jarić, M.. (2021). Hermeneutics and visual performance of polytechnical thinking. in Proceedings 9th International Conference on Renewable Electrical Power Sources
SMEITS., 291-298.
https://hdl.handle.net/21.15107/rcub_machinery_7117

Milosavljević A, Polić S, Petronić S, Jarić M. Hermeneutics and visual performance of polytechnical thinking. in Proceedings 9th International Conference on Renewable Electrical Power Sources. 2021;:291-298.
https://hdl.handle.net/21.15107/rcub_machinery_7117 .

Milosavljević, Anđelka, Polić, Suzana, Petronić, Sanja, Jarić, Marko, "Hermeneutics and visual performance of polytechnical thinking" in Proceedings 9th International Conference on Renewable Electrical Power Sources (2021):291-298,
https://hdl.handle.net/21.15107/rcub_machinery_7117 .

TY  - CONF
AU  - Trninić, Marta
AU  - Petronić, Sanja
AU  - Jarić, Marko
PY  - 2021
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7116
AB  - Tehnologija gasifikacije predstavlja jednu od obećavajućih opcija za pretvaranje energije biomase u električnu energiju. Proces gasifikacije konvertuje ugljovodonične materijale u ugljenmonoksid, vodonik, ugljen-dioksid i gasovite ugljovodonike (proizvodni gas). Proizvedeni gas se može koristiti u motorima sa unutrašnjim sagorevanjem, i time za proizodnju elelektrične i toplotne
energije. U ovom radu analizirana je podobnost koršćenja kukuruznog oklaska, stabljike kukuruza
i drvne sečke za za proizvodnju električne i toplotne energije. Postrojenje se sastoji od istosmernog
gasifikatra i gasnog motora. Rezultati modeliranja pokazuju da se za 1000 kg suve biomase može
proizvesti: 1566 kWe i 1016 kWth (za drvnu sečku HHV=19.70 MJ/kg); 11142 kWe i 977.8 kWth (za kukuruzni oklasak HHV=19.25 MJ/kg); 1399 kWe ai 960.4 kWth (za stabljike kukuruza HHV=17.31MJ/kg). Rezultati pokazuju veliki potencijal trenutno neiskorištenog poljoprivrednog otpada, posebno kukuruznog klaska
PB  - SMEITS
C3  - Proceedings 9th International Conference on Renewable
Electrical Power Sources
T1  - Gasification of wastes and residues for electricity production
EP  - 253
SP  - 249
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7116
ER  - 

@conference{
author = "Trninić, Marta and Petronić, Sanja and Jarić, Marko",
year = "2021",
abstract = "Tehnologija gasifikacije predstavlja jednu od obećavajućih opcija za pretvaranje energije biomase u električnu energiju. Proces gasifikacije konvertuje ugljovodonične materijale u ugljenmonoksid, vodonik, ugljen-dioksid i gasovite ugljovodonike (proizvodni gas). Proizvedeni gas se može koristiti u motorima sa unutrašnjim sagorevanjem, i time za proizodnju elelektrične i toplotne
energije. U ovom radu analizirana je podobnost koršćenja kukuruznog oklaska, stabljike kukuruza
i drvne sečke za za proizvodnju električne i toplotne energije. Postrojenje se sastoji od istosmernog
gasifikatra i gasnog motora. Rezultati modeliranja pokazuju da se za 1000 kg suve biomase može
proizvesti: 1566 kWe i 1016 kWth (za drvnu sečku HHV=19.70 MJ/kg); 11142 kWe i 977.8 kWth (za kukuruzni oklasak HHV=19.25 MJ/kg); 1399 kWe ai 960.4 kWth (za stabljike kukuruza HHV=17.31MJ/kg). Rezultati pokazuju veliki potencijal trenutno neiskorištenog poljoprivrednog otpada, posebno kukuruznog klaska",
publisher = "SMEITS",
journal = "Proceedings 9th International Conference on Renewable
Electrical Power Sources",
title = "Gasification of wastes and residues for electricity production",
pages = "253-249",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7116"
}

Trninić, M., Petronić, S.,& Jarić, M.. (2021). Gasification of wastes and residues for electricity production. in Proceedings 9th International Conference on Renewable
Electrical Power Sources
SMEITS., 249-253.
https://hdl.handle.net/21.15107/rcub_machinery_7116

Trninić M, Petronić S, Jarić M. Gasification of wastes and residues for electricity production. in Proceedings 9th International Conference on Renewable
Electrical Power Sources. 2021;:249-253.
https://hdl.handle.net/21.15107/rcub_machinery_7116 .

Trninić, Marta, Petronić, Sanja, Jarić, Marko, "Gasification of wastes and residues for electricity production" in Proceedings 9th International Conference on Renewable
Electrical Power Sources (2021):249-253,
https://hdl.handle.net/21.15107/rcub_machinery_7116 .

TY  - CONF
AU  - Milosavljević, Anđelka
AU  - Polić, Suzana
AU  - Petronić, Sanja
AU  - Jarić, Marko
PY  - 2021
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4386
AB  - Hermeneutic and polytechnic views on the technologically shaped existence of modern man intersect in the polytechnic museum environment, in terms of symbolic sublimation. In this paper, the subject of research are operational and technical aspects of the presentation of conceptual positions in the creation of museum representations of polytechnics, in which the central issue is the conceptual application in the visual presentation of machine parts or elements, and machines as a whole. Two studies from the Polytechnic Museum in Moscow are presented, which characterize different technological approaches in the materialization of polytechnic thinking about the technological universe of our civilization.
PB  - Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS
C3  - Proceedings / 9th International Conference on Renewable Electrical Power Sources, Belgrade, October 15, 2021
T1  - Hermeneutics and visual performance  of polytechnical thinking
EP  - 298
SP  - 291
UR  - https://hdl.handle.net/21.15107/rcub_machinery_4386
ER  - 

@conference{
author = "Milosavljević, Anđelka and Polić, Suzana and Petronić, Sanja and Jarić, Marko",
year = "2021",
abstract = "Hermeneutic and polytechnic views on the technologically shaped existence of modern man intersect in the polytechnic museum environment, in terms of symbolic sublimation. In this paper, the subject of research are operational and technical aspects of the presentation of conceptual positions in the creation of museum representations of polytechnics, in which the central issue is the conceptual application in the visual presentation of machine parts or elements, and machines as a whole. Two studies from the Polytechnic Museum in Moscow are presented, which characterize different technological approaches in the materialization of polytechnic thinking about the technological universe of our civilization.",
publisher = "Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS",
journal = "Proceedings / 9th International Conference on Renewable Electrical Power Sources, Belgrade, October 15, 2021",
title = "Hermeneutics and visual performance  of polytechnical thinking",
pages = "298-291",
url = "https://hdl.handle.net/21.15107/rcub_machinery_4386"
}

Milosavljević, A., Polić, S., Petronić, S.,& Jarić, M.. (2021). Hermeneutics and visual performance  of polytechnical thinking. in Proceedings / 9th International Conference on Renewable Electrical Power Sources, Belgrade, October 15, 2021
Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS., 291-298.
https://hdl.handle.net/21.15107/rcub_machinery_4386

Milosavljević A, Polić S, Petronić S, Jarić M. Hermeneutics and visual performance  of polytechnical thinking. in Proceedings / 9th International Conference on Renewable Electrical Power Sources, Belgrade, October 15, 2021. 2021;:291-298.
https://hdl.handle.net/21.15107/rcub_machinery_4386 .

Milosavljević, Anđelka, Polić, Suzana, Petronić, Sanja, Jarić, Marko, "Hermeneutics and visual performance  of polytechnical thinking" in Proceedings / 9th International Conference on Renewable Electrical Power Sources, Belgrade, October 15, 2021 (2021):291-298,
https://hdl.handle.net/21.15107/rcub_machinery_4386 .