TY  - JOUR
AU  - Đurđević, Đorđe
AU  - Anđelić, Nina
AU  - Đurđević, Andrijana
AU  - Petrović, Ana
AU  - Milošević-Mitić, Vesna
AU  - Ivljanin, Bojan
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6997
AB  - The paper presents analytical and numerical determina-tion of the equivalent stress and strain of the open section thin-walled ‘’ cantilever beams loaded with torsion. Ana-lytical calculation was used to calculate the equivalent stress and strain values for the model encastred across the entire cross-section at one end, while the other end is free (model 1). The finite element method is applied for the calculation of the same ‘’ cantilever beam model exposed to torsion, and the stress and strain values are obtained by numerical calculation. Numerical simulations have been performed using KOMIPS software. Analytical and numerical results are compared and discussed. In this paper, a numerical model for constrained torsion is also created in ABAQUS® and SolidWorks® software. A cantilever beam with an omega profile is encastred at one end, while at the other end there is a welded plate (model 2). Numerical models are created, and static calculation is done using the finite element method. The zones of stress concentration are identified and presented. Finally, the equivalent stress values of models 1 and 2 are compared. Conclusions obtained by examining this type of structures may be involved in the design process of new similar structures. The findings obtained during the implementation of this work can be directly applied to iden-tify the behaviour of real structures in their working condi-tions.
T2  - Structural integrity and life/Integritet i vek konstrukcija
T1  - Thin-walled omega profile exposed to constrained torsion-analytical and numerical stress and strain calculation
T1  - Tankozidi omega profil pri ograničenom uvijanju-analitički i numerički proračun napona i deformacija
EP  - 229
IS  - 2
SP  - 225
VL  - 23
UR  - https://hdl.handle.net/21.15107/rcub_machinery_6997
ER  - 

@article{
author = "Đurđević, Đorđe and Anđelić, Nina and Đurđević, Andrijana and Petrović, Ana and Milošević-Mitić, Vesna and Ivljanin, Bojan",
year = "2023",
abstract = "The paper presents analytical and numerical determina-tion of the equivalent stress and strain of the open section thin-walled ‘’ cantilever beams loaded with torsion. Ana-lytical calculation was used to calculate the equivalent stress and strain values for the model encastred across the entire cross-section at one end, while the other end is free (model 1). The finite element method is applied for the calculation of the same ‘’ cantilever beam model exposed to torsion, and the stress and strain values are obtained by numerical calculation. Numerical simulations have been performed using KOMIPS software. Analytical and numerical results are compared and discussed. In this paper, a numerical model for constrained torsion is also created in ABAQUS® and SolidWorks® software. A cantilever beam with an omega profile is encastred at one end, while at the other end there is a welded plate (model 2). Numerical models are created, and static calculation is done using the finite element method. The zones of stress concentration are identified and presented. Finally, the equivalent stress values of models 1 and 2 are compared. Conclusions obtained by examining this type of structures may be involved in the design process of new similar structures. The findings obtained during the implementation of this work can be directly applied to iden-tify the behaviour of real structures in their working condi-tions.",
journal = "Structural integrity and life/Integritet i vek konstrukcija",
title = "Thin-walled omega profile exposed to constrained torsion-analytical and numerical stress and strain calculation, Tankozidi omega profil pri ograničenom uvijanju-analitički i numerički proračun napona i deformacija",
pages = "229-225",
number = "2",
volume = "23",
url = "https://hdl.handle.net/21.15107/rcub_machinery_6997"
}

Đurđević, Đ., Anđelić, N., Đurđević, A., Petrović, A., Milošević-Mitić, V.,& Ivljanin, B.. (2023). Thin-walled omega profile exposed to constrained torsion-analytical and numerical stress and strain calculation. in Structural integrity and life/Integritet i vek konstrukcija, 23(2), 225-229.
https://hdl.handle.net/21.15107/rcub_machinery_6997

Đurđević Đ, Anđelić N, Đurđević A, Petrović A, Milošević-Mitić V, Ivljanin B. Thin-walled omega profile exposed to constrained torsion-analytical and numerical stress and strain calculation. in Structural integrity and life/Integritet i vek konstrukcija. 2023;23(2):225-229.
https://hdl.handle.net/21.15107/rcub_machinery_6997 .

Đurđević, Đorđe, Anđelić, Nina, Đurđević, Andrijana, Petrović, Ana, Milošević-Mitić, Vesna, Ivljanin, Bojan, "Thin-walled omega profile exposed to constrained torsion-analytical and numerical stress and strain calculation" in Structural integrity and life/Integritet i vek konstrukcija, 23, no. 2 (2023):225-229,
https://hdl.handle.net/21.15107/rcub_machinery_6997 .

TY  - JOUR
AU  - Đurđević, Đorđe
AU  - Đurđević, Andrijana
AU  - Anđelić, Nina
AU  - Milošević-Mitić, Vesna
AU  - Antić, Katarina
PY  - 2022
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/5491
AB  - The aim of this paper is to present the application of thin-walled beams on cargo raft load-bearing structure from the aspect of strength and reliability. The beams have an open cross section. Analytical and numerical determination of equivalent stresses and deformations of open section thin-walled ‘U’ and ‘Z’ cantilever beams, loaded with torsion, is presented. Work is divided into three parts. In the first part, equivalent stress and deformation are obtained analytically for cantilever beam model in the whole cross section. In the second part, the finite element method is applied in beam models, and the results are compared with the analytical calculation. The third part presents the profiles installed in load-bearing structures of vessels (rafts) and solutions are shown to apply results of the presented analyses in order to increase reliability. Finally, the design calculation of the raft load-bearing structure is shown.
T2  - Integritet i vek konstrukcija
T1  - STRENGTH AND RELIABILITY OF OPEN CROSS-SECTIONS THIN WALL BEAMS IN A  RAFT LOAD-BEARING STRUCTURE
EP  - 338
IS  - 3
SP  - 335
VL  - 22
UR  - https://hdl.handle.net/21.15107/rcub_machinery_5491
ER  - 

@article{
author = "Đurđević, Đorđe and Đurđević, Andrijana and Anđelić, Nina and Milošević-Mitić, Vesna and Antić, Katarina",
year = "2022",
abstract = "The aim of this paper is to present the application of thin-walled beams on cargo raft load-bearing structure from the aspect of strength and reliability. The beams have an open cross section. Analytical and numerical determination of equivalent stresses and deformations of open section thin-walled ‘U’ and ‘Z’ cantilever beams, loaded with torsion, is presented. Work is divided into three parts. In the first part, equivalent stress and deformation are obtained analytically for cantilever beam model in the whole cross section. In the second part, the finite element method is applied in beam models, and the results are compared with the analytical calculation. The third part presents the profiles installed in load-bearing structures of vessels (rafts) and solutions are shown to apply results of the presented analyses in order to increase reliability. Finally, the design calculation of the raft load-bearing structure is shown.",
journal = "Integritet i vek konstrukcija",
title = "STRENGTH AND RELIABILITY OF OPEN CROSS-SECTIONS THIN WALL BEAMS IN A  RAFT LOAD-BEARING STRUCTURE",
pages = "338-335",
number = "3",
volume = "22",
url = "https://hdl.handle.net/21.15107/rcub_machinery_5491"
}

Đurđević, Đ., Đurđević, A., Anđelić, N., Milošević-Mitić, V.,& Antić, K.. (2022). STRENGTH AND RELIABILITY OF OPEN CROSS-SECTIONS THIN WALL BEAMS IN A  RAFT LOAD-BEARING STRUCTURE. in Integritet i vek konstrukcija, 22(3), 335-338.
https://hdl.handle.net/21.15107/rcub_machinery_5491

Đurđević Đ, Đurđević A, Anđelić N, Milošević-Mitić V, Antić K. STRENGTH AND RELIABILITY OF OPEN CROSS-SECTIONS THIN WALL BEAMS IN A  RAFT LOAD-BEARING STRUCTURE. in Integritet i vek konstrukcija. 2022;22(3):335-338.
https://hdl.handle.net/21.15107/rcub_machinery_5491 .

Đurđević, Đorđe, Đurđević, Andrijana, Anđelić, Nina, Milošević-Mitić, Vesna, Antić, Katarina, "STRENGTH AND RELIABILITY OF OPEN CROSS-SECTIONS THIN WALL BEAMS IN A  RAFT LOAD-BEARING STRUCTURE" in Integritet i vek konstrukcija, 22, no. 3 (2022):335-338,
https://hdl.handle.net/21.15107/rcub_machinery_5491 .

TY  - CONF
AU  - Anđelić, Nina
AU  - Milošević-Mitić, Vesna
AU  - Petrović, Ana
AU  - Đurđević, Đorđe
PY  - 2021
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6127
AB  - An approach to the optimization of the thin-walled cantilever open section beams subjected 
to thе bending and to the constrained torsion, whose consequencesis are particularly evident in the 
case of thin-walled profiles, is considered. The problem is reduced to the determination of 
minimum mass i.e. minimum cross-sectional area of structural thin-walled channel-section and Z section beam elements for given loads, material and geometrical characteristics. The area of the 
cross-section is assumed to be the objective function. The stress constraints are introduced. A 
general case when bending moments about two centroidal axes and the bimoment are acting 
simultaneously is derived, and then some particular loading cases are considered. A method of 
solving the optimal relation of the parts of the considered cross-section is described. Applying the 
Lagrange multiplier method, the equations, whose solutions represent the optimal values of the 
ratios of the parts of the chosen cross-section, are derived. The obtained results are used for 
numerical calculation
C3  - Proceedings of the 8th International Congress of Serbian Society of Mechanics, Kragujevac, Serbia
T1  - One View on the Optimization of Thin-walled Cantilever Channel and Z-section Beams
EP  - 241
SP  - 240
UR  - https://hdl.handle.net/21.15107/rcub_machinery_6127
ER  - 

@conference{
author = "Anđelić, Nina and Milošević-Mitić, Vesna and Petrović, Ana and Đurđević, Đorđe",
year = "2021",
abstract = "An approach to the optimization of the thin-walled cantilever open section beams subjected 
to thе bending and to the constrained torsion, whose consequencesis are particularly evident in the 
case of thin-walled profiles, is considered. The problem is reduced to the determination of 
minimum mass i.e. minimum cross-sectional area of structural thin-walled channel-section and Z section beam elements for given loads, material and geometrical characteristics. The area of the 
cross-section is assumed to be the objective function. The stress constraints are introduced. A 
general case when bending moments about two centroidal axes and the bimoment are acting 
simultaneously is derived, and then some particular loading cases are considered. A method of 
solving the optimal relation of the parts of the considered cross-section is described. Applying the 
Lagrange multiplier method, the equations, whose solutions represent the optimal values of the 
ratios of the parts of the chosen cross-section, are derived. The obtained results are used for 
numerical calculation",
journal = "Proceedings of the 8th International Congress of Serbian Society of Mechanics, Kragujevac, Serbia",
title = "One View on the Optimization of Thin-walled Cantilever Channel and Z-section Beams",
pages = "241-240",
url = "https://hdl.handle.net/21.15107/rcub_machinery_6127"
}

Anđelić, N., Milošević-Mitić, V., Petrović, A.,& Đurđević, Đ.. (2021). One View on the Optimization of Thin-walled Cantilever Channel and Z-section Beams. in Proceedings of the 8th International Congress of Serbian Society of Mechanics, Kragujevac, Serbia, 240-241.
https://hdl.handle.net/21.15107/rcub_machinery_6127

Anđelić N, Milošević-Mitić V, Petrović A, Đurđević Đ. One View on the Optimization of Thin-walled Cantilever Channel and Z-section Beams. in Proceedings of the 8th International Congress of Serbian Society of Mechanics, Kragujevac, Serbia. 2021;:240-241.
https://hdl.handle.net/21.15107/rcub_machinery_6127 .

Anđelić, Nina, Milošević-Mitić, Vesna, Petrović, Ana, Đurđević, Đorđe, "One View on the Optimization of Thin-walled Cantilever Channel and Z-section Beams" in Proceedings of the 8th International Congress of Serbian Society of Mechanics, Kragujevac, Serbia (2021):240-241,
https://hdl.handle.net/21.15107/rcub_machinery_6127 .

TY  - CONF
AU  - Đurđević, Andrijana
AU  - Sedmak, Aleksandar
AU  - Rakin, Marko
AU  - Anđelić, Nina
AU  - Đurđević, Đorđe
PY  - 2019
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/5557
AB  - In this work, experimental welding of three plates were performed in order to obtain T-joint. 
Material of plates was aluminium alloy 5754-H111. All phases of the welding process are 
monitored by visual control. The finite element method is used for numerical analysis of 
temperature distribution in the friction stir welded aluminium plates. Thermo mechanical 3D 
model of T- joint is presented.
C3  - Proceedings of the 7th International Congress of Serbian Society of Mechanics, Sremski Karlovci, Serbia
T1  - Thermo Mechanical Welding Process - Friction Stir Welding
EP  - G1e:8
SP  - G1e:1
UR  - https://hdl.handle.net/21.15107/rcub_machinery_5557
ER  - 

@conference{
author = "Đurđević, Andrijana and Sedmak, Aleksandar and Rakin, Marko and Anđelić, Nina and Đurđević, Đorđe",
year = "2019",
abstract = "In this work, experimental welding of three plates were performed in order to obtain T-joint. 
Material of plates was aluminium alloy 5754-H111. All phases of the welding process are 
monitored by visual control. The finite element method is used for numerical analysis of 
temperature distribution in the friction stir welded aluminium plates. Thermo mechanical 3D 
model of T- joint is presented.",
journal = "Proceedings of the 7th International Congress of Serbian Society of Mechanics, Sremski Karlovci, Serbia",
title = "Thermo Mechanical Welding Process - Friction Stir Welding",
pages = "G1e:8-G1e:1",
url = "https://hdl.handle.net/21.15107/rcub_machinery_5557"
}

Đurđević, A., Sedmak, A., Rakin, M., Anđelić, N.,& Đurđević, Đ.. (2019). Thermo Mechanical Welding Process - Friction Stir Welding. in Proceedings of the 7th International Congress of Serbian Society of Mechanics, Sremski Karlovci, Serbia, G1e:1-G1e:8.
https://hdl.handle.net/21.15107/rcub_machinery_5557

Đurđević A, Sedmak A, Rakin M, Anđelić N, Đurđević Đ. Thermo Mechanical Welding Process - Friction Stir Welding. in Proceedings of the 7th International Congress of Serbian Society of Mechanics, Sremski Karlovci, Serbia. 2019;:G1e:1-G1e:8.
https://hdl.handle.net/21.15107/rcub_machinery_5557 .

Đurđević, Andrijana, Sedmak, Aleksandar, Rakin, Marko, Anđelić, Nina, Đurđević, Đorđe, "Thermo Mechanical Welding Process - Friction Stir Welding" in Proceedings of the 7th International Congress of Serbian Society of Mechanics, Sremski Karlovci, Serbia (2019):G1e:1-G1e:8,
https://hdl.handle.net/21.15107/rcub_machinery_5557 .

TY  - CONF
AU  - Anđelić, Nina
AU  - Milošević-Mitić, Vesna
AU  - Maneski, Taško
AU  - Đurđević, Đorđe
PY  - 2017
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/5574
AB  - This paper deals with the problem of optimization of thin-walled open sections. They are 
subjected to the bending and to the constrained torsion. The particular attention is paid to the 
structural optimization methods. The optimal weight of the structures is obtained starting from 
some initial values of thicknesses and cross-sectional areas. The analytical and numerical 
approaches are derived for structural elements of different shapes of the open cross-section 
elements subjected to several loading cases. Optimization parameters have been determined by 
Lagrange’s multipliers method. The obtained results are used for numerical calculation.
C3  - Proceedings of the 6th International Congress of Serbian Society of Mechanics (IConSSM 2017), Tara, Serbia
T1  - Minimum Weight of Open Section Thin-Walled Structural Elements Under Stress Constraint
EP  - S3b:8
SP  - S3b:1
UR  - https://hdl.handle.net/21.15107/rcub_machinery_5574
ER  - 

@conference{
author = "Anđelić, Nina and Milošević-Mitić, Vesna and Maneski, Taško and Đurđević, Đorđe",
year = "2017",
abstract = "This paper deals with the problem of optimization of thin-walled open sections. They are 
subjected to the bending and to the constrained torsion. The particular attention is paid to the 
structural optimization methods. The optimal weight of the structures is obtained starting from 
some initial values of thicknesses and cross-sectional areas. The analytical and numerical 
approaches are derived for structural elements of different shapes of the open cross-section 
elements subjected to several loading cases. Optimization parameters have been determined by 
Lagrange’s multipliers method. The obtained results are used for numerical calculation.",
journal = "Proceedings of the 6th International Congress of Serbian Society of Mechanics (IConSSM 2017), Tara, Serbia",
title = "Minimum Weight of Open Section Thin-Walled Structural Elements Under Stress Constraint",
pages = "S3b:8-S3b:1",
url = "https://hdl.handle.net/21.15107/rcub_machinery_5574"
}

Anđelić, N., Milošević-Mitić, V., Maneski, T.,& Đurđević, Đ.. (2017). Minimum Weight of Open Section Thin-Walled Structural Elements Under Stress Constraint. in Proceedings of the 6th International Congress of Serbian Society of Mechanics (IConSSM 2017), Tara, Serbia, S3b:1-S3b:8.
https://hdl.handle.net/21.15107/rcub_machinery_5574

Anđelić N, Milošević-Mitić V, Maneski T, Đurđević Đ. Minimum Weight of Open Section Thin-Walled Structural Elements Under Stress Constraint. in Proceedings of the 6th International Congress of Serbian Society of Mechanics (IConSSM 2017), Tara, Serbia. 2017;:S3b:1-S3b:8.
https://hdl.handle.net/21.15107/rcub_machinery_5574 .

Anđelić, Nina, Milošević-Mitić, Vesna, Maneski, Taško, Đurđević, Đorđe, "Minimum Weight of Open Section Thin-Walled Structural Elements Under Stress Constraint" in Proceedings of the 6th International Congress of Serbian Society of Mechanics (IConSSM 2017), Tara, Serbia (2017):S3b:1-S3b:8,
https://hdl.handle.net/21.15107/rcub_machinery_5574 .

TY  - CONF
AU  - Đurđević, Đorđe
AU  - Anđelić, Nina
AU  - Maneski, Taško
AU  - Đurđević, Andrijana
PY  - 2016
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6013
AB  - U ovom radu autori predstavljaju rezultate istraživanja analize naponskog stanja uške spojene sa 
kontejnerskim terminalom. Kontejnerski terminal služi za snabdevanje elektičnom energijom i upravljanje 
sistemom transportnih traka koje se koriste u eksploataciji u rudarskom basenu „Kolubara“. Analiza 
naponskog stanja uške je urađena pri utovaru kontejnera iz razloga što je jedan kontejner sa 
elektroopremom težak 25 tona. Istraživanje je sprovedeno u saradnji sa firmom „Eurometal“ iz Uba.
C3  - Zbornik radova/Proceedings the 40th ЈУПИТЕР Conference with foreign participants, University of Belgrade, Faculty of Mechanical Engineering, Belgrade
T1  - Numerička analiza napona uške na kontejnerskom terminalu 10800x3400/Stress numerical analysis of the conneting lug on container terminal 10800x3400
EP  - 2.17
SP  - 2.12
UR  - https://hdl.handle.net/21.15107/rcub_machinery_6013
ER  - 

@conference{
author = "Đurđević, Đorđe and Anđelić, Nina and Maneski, Taško and Đurđević, Andrijana",
year = "2016",
abstract = "U ovom radu autori predstavljaju rezultate istraživanja analize naponskog stanja uške spojene sa 
kontejnerskim terminalom. Kontejnerski terminal služi za snabdevanje elektičnom energijom i upravljanje 
sistemom transportnih traka koje se koriste u eksploataciji u rudarskom basenu „Kolubara“. Analiza 
naponskog stanja uške je urađena pri utovaru kontejnera iz razloga što je jedan kontejner sa 
elektroopremom težak 25 tona. Istraživanje je sprovedeno u saradnji sa firmom „Eurometal“ iz Uba.",
journal = "Zbornik radova/Proceedings the 40th ЈУПИТЕР Conference with foreign participants, University of Belgrade, Faculty of Mechanical Engineering, Belgrade",
title = "Numerička analiza napona uške na kontejnerskom terminalu 10800x3400/Stress numerical analysis of the conneting lug on container terminal 10800x3400",
pages = "2.17-2.12",
url = "https://hdl.handle.net/21.15107/rcub_machinery_6013"
}

Đurđević, Đ., Anđelić, N., Maneski, T.,& Đurđević, A.. (2016). Numerička analiza napona uške na kontejnerskom terminalu 10800x3400/Stress numerical analysis of the conneting lug on container terminal 10800x3400. in Zbornik radova/Proceedings the 40th ЈУПИТЕР Conference with foreign participants, University of Belgrade, Faculty of Mechanical Engineering, Belgrade, 2.12-2.17.
https://hdl.handle.net/21.15107/rcub_machinery_6013

Đurđević Đ, Anđelić N, Maneski T, Đurđević A. Numerička analiza napona uške na kontejnerskom terminalu 10800x3400/Stress numerical analysis of the conneting lug on container terminal 10800x3400. in Zbornik radova/Proceedings the 40th ЈУПИТЕР Conference with foreign participants, University of Belgrade, Faculty of Mechanical Engineering, Belgrade. 2016;:2.12-2.17.
https://hdl.handle.net/21.15107/rcub_machinery_6013 .

Đurđević, Đorđe, Anđelić, Nina, Maneski, Taško, Đurđević, Andrijana, "Numerička analiza napona uške na kontejnerskom terminalu 10800x3400/Stress numerical analysis of the conneting lug on container terminal 10800x3400" in Zbornik radova/Proceedings the 40th ЈУПИТЕР Conference with foreign participants, University of Belgrade, Faculty of Mechanical Engineering, Belgrade (2016):2.12-2.17,
https://hdl.handle.net/21.15107/rcub_machinery_6013 .

TY  - CONF
AU  - Anđelić, Nina
AU  - Milošević-Mitić, Vesna
AU  - Maneski, Taško
AU  - Milovančević, Milorad
AU  - Đurđević, Đorđe
PY  - 2015
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/5675
AB  - The purpose of this work is to present a possible approach to the mass minimization of structural thin-walled open section beams of the proposed shapes (I, Z and U-beam), submitted to the stress constraints and multiple load cases. Lagrange’s multipliers method has been used to determine the optimization parameters. The area of the cross-section is used as the objective function, while the stress constraint is introduced and used as the constraint function. Finally, some numerical examples are presented in order to verify the analytically obtained values.
C3  - Proceedings of the 6th International Sympozium on Industrial Engineering (SIE 2015)
T1  - Optimum Design of Open Section Thin-Walled Structural Elements According to Stress Constraint
EP  - 348
SP  - 345
UR  - https://hdl.handle.net/21.15107/rcub_machinery_5675
ER  - 

@conference{
author = "Anđelić, Nina and Milošević-Mitić, Vesna and Maneski, Taško and Milovančević, Milorad and Đurđević, Đorđe",
year = "2015",
abstract = "The purpose of this work is to present a possible approach to the mass minimization of structural thin-walled open section beams of the proposed shapes (I, Z and U-beam), submitted to the stress constraints and multiple load cases. Lagrange’s multipliers method has been used to determine the optimization parameters. The area of the cross-section is used as the objective function, while the stress constraint is introduced and used as the constraint function. Finally, some numerical examples are presented in order to verify the analytically obtained values.",
journal = "Proceedings of the 6th International Sympozium on Industrial Engineering (SIE 2015)",
title = "Optimum Design of Open Section Thin-Walled Structural Elements According to Stress Constraint",
pages = "348-345",
url = "https://hdl.handle.net/21.15107/rcub_machinery_5675"
}

Anđelić, N., Milošević-Mitić, V., Maneski, T., Milovančević, M.,& Đurđević, Đ.. (2015). Optimum Design of Open Section Thin-Walled Structural Elements According to Stress Constraint. in Proceedings of the 6th International Sympozium on Industrial Engineering (SIE 2015), 345-348.
https://hdl.handle.net/21.15107/rcub_machinery_5675

Anđelić N, Milošević-Mitić V, Maneski T, Milovančević M, Đurđević Đ. Optimum Design of Open Section Thin-Walled Structural Elements According to Stress Constraint. in Proceedings of the 6th International Sympozium on Industrial Engineering (SIE 2015). 2015;:345-348.
https://hdl.handle.net/21.15107/rcub_machinery_5675 .

Anđelić, Nina, Milošević-Mitić, Vesna, Maneski, Taško, Milovančević, Milorad, Đurđević, Đorđe, "Optimum Design of Open Section Thin-Walled Structural Elements According to Stress Constraint" in Proceedings of the 6th International Sympozium on Industrial Engineering (SIE 2015) (2015):345-348,
https://hdl.handle.net/21.15107/rcub_machinery_5675 .

TY  - CONF
AU  - Đurđević, Đorđe
AU  - Anđelić, Nina
AU  - Maneski, Taško
AU  - Milošević-Mitić, Vesna
AU  - Milovančević, Milorad
AU  - Đurđević, Andrijana
PY  - 2015
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/5682
AB  - The purpose of this work is to present analytical and numerical determination of the equivalent stress of the open section thin-walled „U“ profile loaded with torsion. This work can be divided into  two parts. In the first part of this paper equivalent stress was obtained with analytical calculation. In the second part was applied the finite element method for calculation of equivalent stress. At the end, result of analytical method were compared with numerical method.
C3  - Proceedings of the 7th International Scientific and Expert Conference of the International TEAM Society, Belgrade, Serbia
T1  - Analytical and Numerical Calculation of the Equivalent Stress of Open Section Thin-Walled U Profile at Constrained Torsion
EP  - 505
SP  - 502
UR  - https://hdl.handle.net/21.15107/rcub_machinery_5682
ER  - 

@conference{
author = "Đurđević, Đorđe and Anđelić, Nina and Maneski, Taško and Milošević-Mitić, Vesna and Milovančević, Milorad and Đurđević, Andrijana",
year = "2015",
abstract = "The purpose of this work is to present analytical and numerical determination of the equivalent stress of the open section thin-walled „U“ profile loaded with torsion. This work can be divided into  two parts. In the first part of this paper equivalent stress was obtained with analytical calculation. In the second part was applied the finite element method for calculation of equivalent stress. At the end, result of analytical method were compared with numerical method.",
journal = "Proceedings of the 7th International Scientific and Expert Conference of the International TEAM Society, Belgrade, Serbia",
title = "Analytical and Numerical Calculation of the Equivalent Stress of Open Section Thin-Walled U Profile at Constrained Torsion",
pages = "505-502",
url = "https://hdl.handle.net/21.15107/rcub_machinery_5682"
}

Đurđević, Đ., Anđelić, N., Maneski, T., Milošević-Mitić, V., Milovančević, M.,& Đurđević, A.. (2015). Analytical and Numerical Calculation of the Equivalent Stress of Open Section Thin-Walled U Profile at Constrained Torsion. in Proceedings of the 7th International Scientific and Expert Conference of the International TEAM Society, Belgrade, Serbia, 502-505.
https://hdl.handle.net/21.15107/rcub_machinery_5682

Đurđević Đ, Anđelić N, Maneski T, Milošević-Mitić V, Milovančević M, Đurđević A. Analytical and Numerical Calculation of the Equivalent Stress of Open Section Thin-Walled U Profile at Constrained Torsion. in Proceedings of the 7th International Scientific and Expert Conference of the International TEAM Society, Belgrade, Serbia. 2015;:502-505.
https://hdl.handle.net/21.15107/rcub_machinery_5682 .

Đurđević, Đorđe, Anđelić, Nina, Maneski, Taško, Milošević-Mitić, Vesna, Milovančević, Milorad, Đurđević, Andrijana, "Analytical and Numerical Calculation of the Equivalent Stress of Open Section Thin-Walled U Profile at Constrained Torsion" in Proceedings of the 7th International Scientific and Expert Conference of the International TEAM Society, Belgrade, Serbia (2015):502-505,
https://hdl.handle.net/21.15107/rcub_machinery_5682 .