TY  - JOUR
AU  - Trajkovic, Isaak
AU  - Dragičević, Aleksandra
AU  - Medojevic, Ivana
AU  - Mladenovic, Goran
AU  - Milošević, Miloš
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7230
AB  - This paper contains a comparison of the flexural strength results of two different samples. Both samples were made using additive manufacturing, from ABS (acrylonitrile butadiene styrene) material with the inclusion of an unknown filler designated as X. They also have in common that they are divided into two groups, the first group with a material infill of 100 %, and the second group with a material infill of 50 %. In order to determine that the material infill really affects the flexural strength results, the samples are differentiated by their shape. The first sample consists of tiles, while the second sample consists of pipes. The samples are printed vertically, which doesn’t change the material’s inherent mechanical qualities but does change the amount of infill and the strength of the bond between the layers. The difference between the values of the stress at failure of the material in the tile group is approximately 20 %, while in the tube group this difference is approximately 6 %. We can conclude that filling with the material in the range of 50 to 100 % during the production of pipes has an insignificant effect on bending strength, while this is not the case with plate samples. Based on this, there definitely is a significant influence of geometry when determining flexural strength. The idea for further research should be to measure the influence of samples treated with acetone on their flexural strength.
PB  - Springer
T2  - Journal of Mechanical Science and Technology
T1  - The influence of material infill on ABS-X flexural strength
IS  - 37
SP  - 5577/5581
DO  - 10.1007/s12206-023-2310-8
ER  - 

@article{
author = "Trajkovic, Isaak and Dragičević, Aleksandra and Medojevic, Ivana and Mladenovic, Goran and Milošević, Miloš",
year = "2023",
abstract = "This paper contains a comparison of the flexural strength results of two different samples. Both samples were made using additive manufacturing, from ABS (acrylonitrile butadiene styrene) material with the inclusion of an unknown filler designated as X. They also have in common that they are divided into two groups, the first group with a material infill of 100 %, and the second group with a material infill of 50 %. In order to determine that the material infill really affects the flexural strength results, the samples are differentiated by their shape. The first sample consists of tiles, while the second sample consists of pipes. The samples are printed vertically, which doesn’t change the material’s inherent mechanical qualities but does change the amount of infill and the strength of the bond between the layers. The difference between the values of the stress at failure of the material in the tile group is approximately 20 %, while in the tube group this difference is approximately 6 %. We can conclude that filling with the material in the range of 50 to 100 % during the production of pipes has an insignificant effect on bending strength, while this is not the case with plate samples. Based on this, there definitely is a significant influence of geometry when determining flexural strength. The idea for further research should be to measure the influence of samples treated with acetone on their flexural strength.",
publisher = "Springer",
journal = "Journal of Mechanical Science and Technology",
title = "The influence of material infill on ABS-X flexural strength",
number = "37",
pages = "5577/5581",
doi = "10.1007/s12206-023-2310-8"
}

Trajkovic, I., Dragičević, A., Medojevic, I., Mladenovic, G.,& Milošević, M.. (2023). The influence of material infill on ABS-X flexural strength. in Journal of Mechanical Science and Technology
Springer.(37), 5577/5581.
https://doi.org/10.1007/s12206-023-2310-8

Trajkovic I, Dragičević A, Medojevic I, Mladenovic G, Milošević M. The influence of material infill on ABS-X flexural strength. in Journal of Mechanical Science and Technology. 2023;(37):5577/5581.
doi:10.1007/s12206-023-2310-8 .

Trajkovic, Isaak, Dragičević, Aleksandra, Medojevic, Ivana, Mladenovic, Goran, Milošević, Miloš, "The influence of material infill on ABS-X flexural strength" in Journal of Mechanical Science and Technology, no. 37 (2023):5577/5581,
https://doi.org/10.1007/s12206-023-2310-8 . .