A review on mechanical and tribological properties of aluminium-based metal matrix nanocomposites
Апстракт
This paper provides a brief overview on the mechanical and tribological properties of aluminiumbased composites reinforced with various nanoparticles. The amount of reinforcement was, most often, up to 5 % (vol. or wt.). Based on the reviewed results, it can be observed that by increasing the amount of reinforcement, properties such as hardness and density increase significantly. Tribological tests were performed mostly on pin-on-disc tribometers under dry sliding conditions. Composites reinforced with ceramic nanoparticles such as Al2O3, SiC, TiC, TiO2 and TiB2 showed a higher wear resistance than their matrix alloys. The microstructure of the nanocomposites and morphology of the worn surfaces were in most cases studied by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and energy dispersive spectroscopy (EDS).
Кључне речи:
aluminium / nanoparticles / nanocomposites / hardness / wearИзвор:
18th International Conference on Tribology – SERBIATRIB '23, Kragujevac (Serbia), 17-19.05.2023, Proceedings, 2023, 226-230Финансирање / пројекти:
- bilateral Project 337-00-577/2021-09/16 between Republic of Serbia and Republic of Austria
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200105 (Универзитет у Београду, Машински факултет) (RS-MESTD-inst-2020-200105)
URI
http://tribolab.mas.bg.ac.rs/radovi/2023_03.pdfhttps://machinery.mas.bg.ac.rs/handle/123456789/7338
Колекције
Институција/група
Mašinski fakultetTY - CONF AU - Gajević, Sandra AU - Miladinović, Slavica AU - Džunić, Dragan AU - Stojanović, Blaža AU - Vencl, Aleksandar PY - 2023 UR - http://tribolab.mas.bg.ac.rs/radovi/2023_03.pdf UR - https://machinery.mas.bg.ac.rs/handle/123456789/7338 AB - This paper provides a brief overview on the mechanical and tribological properties of aluminiumbased composites reinforced with various nanoparticles. The amount of reinforcement was, most often, up to 5 % (vol. or wt.). Based on the reviewed results, it can be observed that by increasing the amount of reinforcement, properties such as hardness and density increase significantly. Tribological tests were performed mostly on pin-on-disc tribometers under dry sliding conditions. Composites reinforced with ceramic nanoparticles such as Al2O3, SiC, TiC, TiO2 and TiB2 showed a higher wear resistance than their matrix alloys. The microstructure of the nanocomposites and morphology of the worn surfaces were in most cases studied by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and energy dispersive spectroscopy (EDS). C3 - 18th International Conference on Tribology – SERBIATRIB '23, Kragujevac (Serbia), 17-19.05.2023, Proceedings T1 - A review on mechanical and tribological properties of aluminium-based metal matrix nanocomposites EP - 230 SP - 226 UR - https://hdl.handle.net/21.15107/rcub_machinery_7338 ER -
@conference{ author = "Gajević, Sandra and Miladinović, Slavica and Džunić, Dragan and Stojanović, Blaža and Vencl, Aleksandar", year = "2023", abstract = "This paper provides a brief overview on the mechanical and tribological properties of aluminiumbased composites reinforced with various nanoparticles. The amount of reinforcement was, most often, up to 5 % (vol. or wt.). Based on the reviewed results, it can be observed that by increasing the amount of reinforcement, properties such as hardness and density increase significantly. Tribological tests were performed mostly on pin-on-disc tribometers under dry sliding conditions. Composites reinforced with ceramic nanoparticles such as Al2O3, SiC, TiC, TiO2 and TiB2 showed a higher wear resistance than their matrix alloys. The microstructure of the nanocomposites and morphology of the worn surfaces were in most cases studied by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and energy dispersive spectroscopy (EDS).", journal = "18th International Conference on Tribology – SERBIATRIB '23, Kragujevac (Serbia), 17-19.05.2023, Proceedings", title = "A review on mechanical and tribological properties of aluminium-based metal matrix nanocomposites", pages = "230-226", url = "https://hdl.handle.net/21.15107/rcub_machinery_7338" }
Gajević, S., Miladinović, S., Džunić, D., Stojanović, B.,& Vencl, A.. (2023). A review on mechanical and tribological properties of aluminium-based metal matrix nanocomposites. in 18th International Conference on Tribology – SERBIATRIB '23, Kragujevac (Serbia), 17-19.05.2023, Proceedings, 226-230. https://hdl.handle.net/21.15107/rcub_machinery_7338
Gajević S, Miladinović S, Džunić D, Stojanović B, Vencl A. A review on mechanical and tribological properties of aluminium-based metal matrix nanocomposites. in 18th International Conference on Tribology – SERBIATRIB '23, Kragujevac (Serbia), 17-19.05.2023, Proceedings. 2023;:226-230. https://hdl.handle.net/21.15107/rcub_machinery_7338 .
Gajević, Sandra, Miladinović, Slavica, Džunić, Dragan, Stojanović, Blaža, Vencl, Aleksandar, "A review on mechanical and tribological properties of aluminium-based metal matrix nanocomposites" in 18th International Conference on Tribology – SERBIATRIB '23, Kragujevac (Serbia), 17-19.05.2023, Proceedings (2023):226-230, https://hdl.handle.net/21.15107/rcub_machinery_7338 .