Impact of Ball Bearing Geometry and Operational Load on the Volume of the Lubricant in the Bearing's Loaded Zone
Apstrakt
This paper presents the mathematical model for determining the quantity of lubricant in contact between balls and raceways of a deep groove ball bearing. In the deep groove ball bearing, balls participate in transferring the load from one ring to another, as they pass through the contact zone [1]. In doing so, the balls are in mutual elastohydrodynamic lubrication (EHL) contact with the raceways [2]. In the EHL contact between the balls and the raceway, there is a certain amount of lubricant between contacting surfaces. The volume of lubricant in contact can be determined as the product of the contact zone's area multiplied by the thickness of the lubricant film between them. The relationship between the lubricant volume VLq (q = 1 for ball-outer ring contact, q = 2 for ball-inner ring contact) within the contact zone and the relative radial clearance e/δ0 (e – radial clearance; δ0 – contact deformation between ball and raceway) as well as the relative operational load FR/C (FR – opera...tional load; C – bearing dynamic load rating) of the deep groove ball bearing 6206 is shown in Figure below. Based on the known quantity of lubricant volume VL within both contact zones, it becomes possible to estimate the concentration of contaminating particles that are entrapped in contact between ball raceways. This estimation can be related to the overall known concentration of abrasive particles within the bearing lubricant. Through this approach, it becomes feasible to assess and predict the level of abrasive wear occurring within bearing components during operation.
Ključne reči:
Ball bearing / Load distribution / EHL / Bearing lubricant volumeIzvor:
Book of Abstracts from 9th International Scientific Conference on Advances in Mechanical Engineering, 2023, 60-61Izdavač:
- Trans Tech Publications Ltd, Switzerland
Finansiranje / projekti:
- Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200105 (Univerzitet u Beogradu, Mašinski fakultet) (RS-MESTD-inst-2020-200105)
Kolekcije
Institucija/grupa
Mašinski fakultetTY - CONF AU - Ljubojević, Pavle AU - Ćoćić, Aleksandar AU - Lazović, Tatjana PY - 2023 UR - https://machinery.mas.bg.ac.rs/handle/123456789/7167 AB - This paper presents the mathematical model for determining the quantity of lubricant in contact between balls and raceways of a deep groove ball bearing. In the deep groove ball bearing, balls participate in transferring the load from one ring to another, as they pass through the contact zone [1]. In doing so, the balls are in mutual elastohydrodynamic lubrication (EHL) contact with the raceways [2]. In the EHL contact between the balls and the raceway, there is a certain amount of lubricant between contacting surfaces. The volume of lubricant in contact can be determined as the product of the contact zone's area multiplied by the thickness of the lubricant film between them. The relationship between the lubricant volume VLq (q = 1 for ball-outer ring contact, q = 2 for ball-inner ring contact) within the contact zone and the relative radial clearance e/δ0 (e – radial clearance; δ0 – contact deformation between ball and raceway) as well as the relative operational load FR/C (FR – operational load; C – bearing dynamic load rating) of the deep groove ball bearing 6206 is shown in Figure below. Based on the known quantity of lubricant volume VL within both contact zones, it becomes possible to estimate the concentration of contaminating particles that are entrapped in contact between ball raceways. This estimation can be related to the overall known concentration of abrasive particles within the bearing lubricant. Through this approach, it becomes feasible to assess and predict the level of abrasive wear occurring within bearing components during operation. PB - Trans Tech Publications Ltd, Switzerland C3 - Book of Abstracts from 9th International Scientific Conference on Advances in Mechanical Engineering T1 - Impact of Ball Bearing Geometry and Operational Load on the Volume of the Lubricant in the Bearing's Loaded Zone EP - 61 SP - 60 UR - https://hdl.handle.net/21.15107/rcub_machinery_7167 ER -
@conference{ author = "Ljubojević, Pavle and Ćoćić, Aleksandar and Lazović, Tatjana", year = "2023", abstract = "This paper presents the mathematical model for determining the quantity of lubricant in contact between balls and raceways of a deep groove ball bearing. In the deep groove ball bearing, balls participate in transferring the load from one ring to another, as they pass through the contact zone [1]. In doing so, the balls are in mutual elastohydrodynamic lubrication (EHL) contact with the raceways [2]. In the EHL contact between the balls and the raceway, there is a certain amount of lubricant between contacting surfaces. The volume of lubricant in contact can be determined as the product of the contact zone's area multiplied by the thickness of the lubricant film between them. The relationship between the lubricant volume VLq (q = 1 for ball-outer ring contact, q = 2 for ball-inner ring contact) within the contact zone and the relative radial clearance e/δ0 (e – radial clearance; δ0 – contact deformation between ball and raceway) as well as the relative operational load FR/C (FR – operational load; C – bearing dynamic load rating) of the deep groove ball bearing 6206 is shown in Figure below. Based on the known quantity of lubricant volume VL within both contact zones, it becomes possible to estimate the concentration of contaminating particles that are entrapped in contact between ball raceways. This estimation can be related to the overall known concentration of abrasive particles within the bearing lubricant. Through this approach, it becomes feasible to assess and predict the level of abrasive wear occurring within bearing components during operation.", publisher = "Trans Tech Publications Ltd, Switzerland", journal = "Book of Abstracts from 9th International Scientific Conference on Advances in Mechanical Engineering", title = "Impact of Ball Bearing Geometry and Operational Load on the Volume of the Lubricant in the Bearing's Loaded Zone", pages = "61-60", url = "https://hdl.handle.net/21.15107/rcub_machinery_7167" }
Ljubojević, P., Ćoćić, A.,& Lazović, T.. (2023). Impact of Ball Bearing Geometry and Operational Load on the Volume of the Lubricant in the Bearing's Loaded Zone. in Book of Abstracts from 9th International Scientific Conference on Advances in Mechanical Engineering Trans Tech Publications Ltd, Switzerland., 60-61. https://hdl.handle.net/21.15107/rcub_machinery_7167
Ljubojević P, Ćoćić A, Lazović T. Impact of Ball Bearing Geometry and Operational Load on the Volume of the Lubricant in the Bearing's Loaded Zone. in Book of Abstracts from 9th International Scientific Conference on Advances in Mechanical Engineering. 2023;:60-61. https://hdl.handle.net/21.15107/rcub_machinery_7167 .
Ljubojević, Pavle, Ćoćić, Aleksandar, Lazović, Tatjana, "Impact of Ball Bearing Geometry and Operational Load on the Volume of the Lubricant in the Bearing's Loaded Zone" in Book of Abstracts from 9th International Scientific Conference on Advances in Mechanical Engineering (2023):60-61, https://hdl.handle.net/21.15107/rcub_machinery_7167 .