Development of Conceptual Solution of Experimental Setting for Controlled Application of Impact Force on the Head Model Using DIC
2020
Аутори
Milošević, MilošTrajković, Isaak
Ivanov, Toni
Popović, Mihajlo
Mitrović, Nenad
Milovanović, Aleksa
Jovanović-Saković, Jelena
Остала ауторства
Mitrović, NenadMilošević, Miloš
Mladenović, Goran
Конференцијски прилог (Објављена верзија)
,
2020 International Conference of Experimental and Numerical Investigations and New Technologies – CNN TECH 2020
Метаподаци
Приказ свих података о документуАпстракт
After noting that head and neck injuries are very common in martial arts sports, a growing need for developing helmet materials and models appeared. In addition to the problems that arise in terms of design, there are also problems in terms of developing the material from which the helmets are made. In terms of design, the helmet must interfere as little as possible with the mobility of the head and neck and visibility, while in terms of material development, it is necessary to ensure optimal mechanical properties of the material from which the helmet is made, which is simultaneously the biggest challenge for helmet manufacturers. In the process of developing models and materials of helmets, there was a need for research in which the development of experimental settings will credibly simulate the blows that are exchanged during a sports fight. The aim of this paper is to make an experimental setup to enable testing of helmets from different manufacturers as well as testing of newer gen...eration helmets. This paper presents a conceptual solution of an experimental setup in which impacts are simulated in controlled conditions, taking into account that the impact image applied to the head model is controlled, so that it is possible to simulate different types of impacts while maintaining the same boundary conditions.
Кључне речи:
DIC / Experimental techniques / helmet / injuries / deformationИзвор:
The Book Of Abstracts, 4th International Conference of Experimental and Numerical Investigations and New Technologies – CNN TECH 2020, 2020, 30-30Издавач:
- Belgrade : Innovation Center of Faculty of Mechanical Engineering
Колекције
Институција/група
Mašinski fakultetTY - CONF AU - Milošević, Miloš AU - Trajković, Isaak AU - Ivanov, Toni AU - Popović, Mihajlo AU - Mitrović, Nenad AU - Milovanović, Aleksa AU - Jovanović-Saković, Jelena PY - 2020 UR - https://machinery.mas.bg.ac.rs/handle/123456789/6085 AB - After noting that head and neck injuries are very common in martial arts sports, a growing need for developing helmet materials and models appeared. In addition to the problems that arise in terms of design, there are also problems in terms of developing the material from which the helmets are made. In terms of design, the helmet must interfere as little as possible with the mobility of the head and neck and visibility, while in terms of material development, it is necessary to ensure optimal mechanical properties of the material from which the helmet is made, which is simultaneously the biggest challenge for helmet manufacturers. In the process of developing models and materials of helmets, there was a need for research in which the development of experimental settings will credibly simulate the blows that are exchanged during a sports fight. The aim of this paper is to make an experimental setup to enable testing of helmets from different manufacturers as well as testing of newer generation helmets. This paper presents a conceptual solution of an experimental setup in which impacts are simulated in controlled conditions, taking into account that the impact image applied to the head model is controlled, so that it is possible to simulate different types of impacts while maintaining the same boundary conditions. PB - Belgrade : Innovation Center of Faculty of Mechanical Engineering C3 - The Book Of Abstracts, 4th International Conference of Experimental and Numerical Investigations and New Technologies – CNN TECH 2020 T1 - Development of Conceptual Solution of Experimental Setting for Controlled Application of Impact Force on the Head Model Using DIC EP - 30 SP - 30 UR - https://hdl.handle.net/21.15107/rcub_machinery_6085 ER -
@conference{ author = "Milošević, Miloš and Trajković, Isaak and Ivanov, Toni and Popović, Mihajlo and Mitrović, Nenad and Milovanović, Aleksa and Jovanović-Saković, Jelena", year = "2020", abstract = "After noting that head and neck injuries are very common in martial arts sports, a growing need for developing helmet materials and models appeared. In addition to the problems that arise in terms of design, there are also problems in terms of developing the material from which the helmets are made. In terms of design, the helmet must interfere as little as possible with the mobility of the head and neck and visibility, while in terms of material development, it is necessary to ensure optimal mechanical properties of the material from which the helmet is made, which is simultaneously the biggest challenge for helmet manufacturers. In the process of developing models and materials of helmets, there was a need for research in which the development of experimental settings will credibly simulate the blows that are exchanged during a sports fight. The aim of this paper is to make an experimental setup to enable testing of helmets from different manufacturers as well as testing of newer generation helmets. This paper presents a conceptual solution of an experimental setup in which impacts are simulated in controlled conditions, taking into account that the impact image applied to the head model is controlled, so that it is possible to simulate different types of impacts while maintaining the same boundary conditions.", publisher = "Belgrade : Innovation Center of Faculty of Mechanical Engineering", journal = "The Book Of Abstracts, 4th International Conference of Experimental and Numerical Investigations and New Technologies – CNN TECH 2020", title = "Development of Conceptual Solution of Experimental Setting for Controlled Application of Impact Force on the Head Model Using DIC", pages = "30-30", url = "https://hdl.handle.net/21.15107/rcub_machinery_6085" }
Milošević, M., Trajković, I., Ivanov, T., Popović, M., Mitrović, N., Milovanović, A.,& Jovanović-Saković, J.. (2020). Development of Conceptual Solution of Experimental Setting for Controlled Application of Impact Force on the Head Model Using DIC. in The Book Of Abstracts, 4th International Conference of Experimental and Numerical Investigations and New Technologies – CNN TECH 2020 Belgrade : Innovation Center of Faculty of Mechanical Engineering., 30-30. https://hdl.handle.net/21.15107/rcub_machinery_6085
Milošević M, Trajković I, Ivanov T, Popović M, Mitrović N, Milovanović A, Jovanović-Saković J. Development of Conceptual Solution of Experimental Setting for Controlled Application of Impact Force on the Head Model Using DIC. in The Book Of Abstracts, 4th International Conference of Experimental and Numerical Investigations and New Technologies – CNN TECH 2020. 2020;:30-30. https://hdl.handle.net/21.15107/rcub_machinery_6085 .
Milošević, Miloš, Trajković, Isaak, Ivanov, Toni, Popović, Mihajlo, Mitrović, Nenad, Milovanović, Aleksa, Jovanović-Saković, Jelena, "Development of Conceptual Solution of Experimental Setting for Controlled Application of Impact Force on the Head Model Using DIC" in The Book Of Abstracts, 4th International Conference of Experimental and Numerical Investigations and New Technologies – CNN TECH 2020 (2020):30-30, https://hdl.handle.net/21.15107/rcub_machinery_6085 .