Axial crushing analysis of characteristics of empty and foam filled circular tubes
2017
Конференцијски прилог (Објављена верзија)
,
Innovation Center of Faculty of Mechanical Engineering
Метаподаци
Приказ свих података о документуАпстракт
This paper describes experimental research of improved type of collision kinetic energy absorber. Absorber
works on the principle of shrinking a foam filled tube of circular cross section. During collision, a seamless
tube is passing through a special cone bush, extrusion the tube and compressing the foam. Energy is
absorbed by the plastic deformation of the tube, friction between the tube and the cone bush and through
deformation of the PU foam. The tubes were filled with PU foam higher density. This new type of absorber
enables gradual increase of deformation resistance and greater absorption power with compact dimensions.
Scaled samples have been tested in the laboratory conditions. The influence of the PU foam and different
geometries on absorption characteristics, as well as the benefits of using such an absorber, are presented
and discussed in this paper. The results show that the foam filled absorber has approximately 12% higher
absorption power than the only extrusion ...absorber by itself.
Кључне речи:
Circular tube / PU foam / Energy absorption / Experimental researches / ExtrusionИзвор:
International Conference of Experimental and Numerical Investigations and New Technologies CNN TECH 2017, The book of Abstract, 2017, 10-10Издавач:
- Innovation Center of Faculty of Mechanical Engineering
Финансирање / пројекти:
- Научно-технолошка подршка унапређењу безбедности специјалних друмских и шинских возила (RS-MESTD-Technological Development (TD or TR)-35045)
- Одрживост и унапређење машинских система у енергетици и транспорту применом форензичког инжењерства, еко и робуст дизајна (RS-MESTD-Technological Development (TD or TR)-35006)
Колекције
Институција/група
Mašinski fakultetTY - CONF AU - Tanasković, Jovan AU - Mitrovic, Aleksandra AU - Milković, Dragan AU - Golubović, Snežana PY - 2017 UR - https://machinery.mas.bg.ac.rs/handle/123456789/5976 AB - This paper describes experimental research of improved type of collision kinetic energy absorber. Absorber works on the principle of shrinking a foam filled tube of circular cross section. During collision, a seamless tube is passing through a special cone bush, extrusion the tube and compressing the foam. Energy is absorbed by the plastic deformation of the tube, friction between the tube and the cone bush and through deformation of the PU foam. The tubes were filled with PU foam higher density. This new type of absorber enables gradual increase of deformation resistance and greater absorption power with compact dimensions. Scaled samples have been tested in the laboratory conditions. The influence of the PU foam and different geometries on absorption characteristics, as well as the benefits of using such an absorber, are presented and discussed in this paper. The results show that the foam filled absorber has approximately 12% higher absorption power than the only extrusion absorber by itself. PB - Innovation Center of Faculty of Mechanical Engineering C3 - International Conference of Experimental and Numerical Investigations and New Technologies CNN TECH 2017, The book of Abstract T1 - Axial crushing analysis of characteristics of empty and foam filled circular tubes EP - 10 SP - 10 UR - https://hdl.handle.net/21.15107/rcub_machinery_5976 ER -
@conference{ author = "Tanasković, Jovan and Mitrovic, Aleksandra and Milković, Dragan and Golubović, Snežana", year = "2017", abstract = "This paper describes experimental research of improved type of collision kinetic energy absorber. Absorber works on the principle of shrinking a foam filled tube of circular cross section. During collision, a seamless tube is passing through a special cone bush, extrusion the tube and compressing the foam. Energy is absorbed by the plastic deformation of the tube, friction between the tube and the cone bush and through deformation of the PU foam. The tubes were filled with PU foam higher density. This new type of absorber enables gradual increase of deformation resistance and greater absorption power with compact dimensions. Scaled samples have been tested in the laboratory conditions. The influence of the PU foam and different geometries on absorption characteristics, as well as the benefits of using such an absorber, are presented and discussed in this paper. The results show that the foam filled absorber has approximately 12% higher absorption power than the only extrusion absorber by itself.", publisher = "Innovation Center of Faculty of Mechanical Engineering", journal = "International Conference of Experimental and Numerical Investigations and New Technologies CNN TECH 2017, The book of Abstract", title = "Axial crushing analysis of characteristics of empty and foam filled circular tubes", pages = "10-10", url = "https://hdl.handle.net/21.15107/rcub_machinery_5976" }
Tanasković, J., Mitrovic, A., Milković, D.,& Golubović, S.. (2017). Axial crushing analysis of characteristics of empty and foam filled circular tubes. in International Conference of Experimental and Numerical Investigations and New Technologies CNN TECH 2017, The book of Abstract Innovation Center of Faculty of Mechanical Engineering., 10-10. https://hdl.handle.net/21.15107/rcub_machinery_5976
Tanasković J, Mitrovic A, Milković D, Golubović S. Axial crushing analysis of characteristics of empty and foam filled circular tubes. in International Conference of Experimental and Numerical Investigations and New Technologies CNN TECH 2017, The book of Abstract. 2017;:10-10. https://hdl.handle.net/21.15107/rcub_machinery_5976 .
Tanasković, Jovan, Mitrovic, Aleksandra, Milković, Dragan, Golubović, Snežana, "Axial crushing analysis of characteristics of empty and foam filled circular tubes" in International Conference of Experimental and Numerical Investigations and New Technologies CNN TECH 2017, The book of Abstract (2017):10-10, https://hdl.handle.net/21.15107/rcub_machinery_5976 .