Layers optimisation of the pla parts formed by additive technologies
Apstrakt
Achieving required layer quality and its consistency is one of the key things for the effective implementation of the additive technologies, such as 3D printing. Experiments which were conducted at the Department of the Production Engineering, Faculty of Mechanical Engineering, University of Belgrade, were acquired optima parameters that led to better parts quality produced of PLA polymer with widely used commercial 3D printers. Parameters that were varied during the experiments were nozzle temperature and printing speed. After production, all parts were microscopically observed and their surfaces roughnesses were measured. It is established that differen values of these parameters can lead to diametrically different quality of layers that cause different quality of the printed parts.
Ključne reči:
Rapid prototyping / 3D printing / PLA polymer / Layer qualityIzvor:
Proceedings of 4th International Scientific Conference - COMETa2018, 2018, 97-104Izdavač:
- University of East Sarajevo, Faculty of Mechanical Engineering East Sarajevo
Finansiranje / projekti:
- Razvoj nove generacije domaćih obradnih sistema (RS-MESTD-Technological Development (TD or TR)-35022)
Kolekcije
Institucija/grupa
Mašinski fakultetTY - CONF AU - Pjević, Miloš AU - Popović, Mihajlo AU - Tanović, Ljubodrag AU - Puzović, Radovan AU - Mladenović, Goran PY - 2018 UR - https://machinery.mas.bg.ac.rs/handle/123456789/5302 AB - Achieving required layer quality and its consistency is one of the key things for the effective implementation of the additive technologies, such as 3D printing. Experiments which were conducted at the Department of the Production Engineering, Faculty of Mechanical Engineering, University of Belgrade, were acquired optima parameters that led to better parts quality produced of PLA polymer with widely used commercial 3D printers. Parameters that were varied during the experiments were nozzle temperature and printing speed. After production, all parts were microscopically observed and their surfaces roughnesses were measured. It is established that differen values of these parameters can lead to diametrically different quality of layers that cause different quality of the printed parts. PB - University of East Sarajevo, Faculty of Mechanical Engineering East Sarajevo C3 - Proceedings of 4th International Scientific Conference - COMETa2018 T1 - Layers optimisation of the pla parts formed by additive technologies EP - 104 SP - 97 UR - https://hdl.handle.net/21.15107/rcub_machinery_5302 ER -
@conference{ author = "Pjević, Miloš and Popović, Mihajlo and Tanović, Ljubodrag and Puzović, Radovan and Mladenović, Goran", year = "2018", abstract = "Achieving required layer quality and its consistency is one of the key things for the effective implementation of the additive technologies, such as 3D printing. Experiments which were conducted at the Department of the Production Engineering, Faculty of Mechanical Engineering, University of Belgrade, were acquired optima parameters that led to better parts quality produced of PLA polymer with widely used commercial 3D printers. Parameters that were varied during the experiments were nozzle temperature and printing speed. After production, all parts were microscopically observed and their surfaces roughnesses were measured. It is established that differen values of these parameters can lead to diametrically different quality of layers that cause different quality of the printed parts.", publisher = "University of East Sarajevo, Faculty of Mechanical Engineering East Sarajevo", journal = "Proceedings of 4th International Scientific Conference - COMETa2018", title = "Layers optimisation of the pla parts formed by additive technologies", pages = "104-97", url = "https://hdl.handle.net/21.15107/rcub_machinery_5302" }
Pjević, M., Popović, M., Tanović, L., Puzović, R.,& Mladenović, G.. (2018). Layers optimisation of the pla parts formed by additive technologies. in Proceedings of 4th International Scientific Conference - COMETa2018 University of East Sarajevo, Faculty of Mechanical Engineering East Sarajevo., 97-104. https://hdl.handle.net/21.15107/rcub_machinery_5302
Pjević M, Popović M, Tanović L, Puzović R, Mladenović G. Layers optimisation of the pla parts formed by additive technologies. in Proceedings of 4th International Scientific Conference - COMETa2018. 2018;:97-104. https://hdl.handle.net/21.15107/rcub_machinery_5302 .
Pjević, Miloš, Popović, Mihajlo, Tanović, Ljubodrag, Puzović, Radovan, Mladenović, Goran, "Layers optimisation of the pla parts formed by additive technologies" in Proceedings of 4th International Scientific Conference - COMETa2018 (2018):97-104, https://hdl.handle.net/21.15107/rcub_machinery_5302 .