Wireless Sensor Network Application in Monitoring of Machining Operations
Apstrakt
The scope of this paper is the research of the possibilities of application of Wireless Sensor Networks (WSNs) for monitoring of machining operations. Due to the limited battery lifetime, WSNs are energy constrained networks and energy efficiency of the network is a very important issue. Since communication requires significantly more energy then processing, instead of sending raw data through the network, data processing and decision making should be performed in the node. Consequently, as a basis for WSN design we consider IEEE 802.15.4 Wireless Networking Standard, created for low data rates and very low power consumption which makes it suitable for remote monitoring and control. In this paper, a prototype of the node, designed for acceleration monitoring, has been developed. The node has been created at the Faculty of Mechanical Engineering in Belgrade and it is based on low power Atmel Atmega16 microcontroller and IEEE 802.15.4 compatible transceiver.
Ključne reči:
Wireless sensor networks / machining operations monitoringIzvor:
Proceedings of the 34th International Conference on Production Engineering, 2011, 365-368Finansiranje / projekti:
- info:eu-repo/grantAgreement/MESTD/Technological Development (TD or TR)/35007/RS/ (-)
- Istraživanje i razvoj metoda modeliranja i postupaka izrade dentalnih nadoknada primenom savremenih tehnologija i računarom podržanih sistema (RS-MESTD-Technological Development (TD or TR)-35020)
- Naučno-tehnološka podrška unapređenju bezbednosti specijalnih drumskih i šinskih vozila (RS-MESTD-Technological Development (TD or TR)-35045)
- Razvoj, projektovanje i implementacija savremenih strategija integrisanog upravljanja operativnim radom i održavanjem vozila i mehanizacije u sistemima autotransporta, rudarstva i energetike (RS-MESTD-Technological Development (TD or TR)-35030)
Kolekcije
Institucija/grupa
Mašinski fakultetTY - CONF AU - Jakovljević, Živana AU - Pajić, Miroslav AU - Aleksendrić, Dragan AU - Milković, Dragan PY - 2011 UR - https://machinery.mas.bg.ac.rs/handle/123456789/5188 AB - The scope of this paper is the research of the possibilities of application of Wireless Sensor Networks (WSNs) for monitoring of machining operations. Due to the limited battery lifetime, WSNs are energy constrained networks and energy efficiency of the network is a very important issue. Since communication requires significantly more energy then processing, instead of sending raw data through the network, data processing and decision making should be performed in the node. Consequently, as a basis for WSN design we consider IEEE 802.15.4 Wireless Networking Standard, created for low data rates and very low power consumption which makes it suitable for remote monitoring and control. In this paper, a prototype of the node, designed for acceleration monitoring, has been developed. The node has been created at the Faculty of Mechanical Engineering in Belgrade and it is based on low power Atmel Atmega16 microcontroller and IEEE 802.15.4 compatible transceiver. C3 - Proceedings of the 34th International Conference on Production Engineering T1 - Wireless Sensor Network Application in Monitoring of Machining Operations EP - 368 SP - 365 UR - https://hdl.handle.net/21.15107/rcub_machinery_5188 ER -
@conference{ author = "Jakovljević, Živana and Pajić, Miroslav and Aleksendrić, Dragan and Milković, Dragan", year = "2011", abstract = "The scope of this paper is the research of the possibilities of application of Wireless Sensor Networks (WSNs) for monitoring of machining operations. Due to the limited battery lifetime, WSNs are energy constrained networks and energy efficiency of the network is a very important issue. Since communication requires significantly more energy then processing, instead of sending raw data through the network, data processing and decision making should be performed in the node. Consequently, as a basis for WSN design we consider IEEE 802.15.4 Wireless Networking Standard, created for low data rates and very low power consumption which makes it suitable for remote monitoring and control. In this paper, a prototype of the node, designed for acceleration monitoring, has been developed. The node has been created at the Faculty of Mechanical Engineering in Belgrade and it is based on low power Atmel Atmega16 microcontroller and IEEE 802.15.4 compatible transceiver.", journal = "Proceedings of the 34th International Conference on Production Engineering", title = "Wireless Sensor Network Application in Monitoring of Machining Operations", pages = "368-365", url = "https://hdl.handle.net/21.15107/rcub_machinery_5188" }
Jakovljević, Ž., Pajić, M., Aleksendrić, D.,& Milković, D.. (2011). Wireless Sensor Network Application in Monitoring of Machining Operations. in Proceedings of the 34th International Conference on Production Engineering, 365-368. https://hdl.handle.net/21.15107/rcub_machinery_5188
Jakovljević Ž, Pajić M, Aleksendrić D, Milković D. Wireless Sensor Network Application in Monitoring of Machining Operations. in Proceedings of the 34th International Conference on Production Engineering. 2011;:365-368. https://hdl.handle.net/21.15107/rcub_machinery_5188 .
Jakovljević, Živana, Pajić, Miroslav, Aleksendrić, Dragan, Milković, Dragan, "Wireless Sensor Network Application in Monitoring of Machining Operations" in Proceedings of the 34th International Conference on Production Engineering (2011):365-368, https://hdl.handle.net/21.15107/rcub_machinery_5188 .