Search
Now showing items 1-10 of 13
Fem model for calculation of hydro turbine shaft
(Univ Novi Sad, Fac Tech Sci, Adeko, Novi Sad, 2010)
This paper describes the real problem calculation of stress state of hydro turbine shaft with crack appearance on shaft-flange radii. Finite element method (FEM) is used for calculation of shaft stress state and shaft ...
Quantification of stress raiser influence on decrease of machine parts fatigue life
(Univ Novi Sad, Fac Tech Sci, Adeko, Novi Sad, 2012)
This paper displays the usage of Theory of Critical Distances (TCD) in the prediction of high-cycle fatigue behaviour in machine parts and systems. It is possible to gain real overview of stresses of machine parts by Finite ...
Prediction of crack initiation in spur gear contact zone
(Univ Novi Sad, Fac Tech Sci, Adeko, Novi Sad, 2012)
The objective of this paper is to give a new viewpoint in contact fatigue prediction in the case of high-cycle fatigue. The presented research is based on up-to-date methods and multidisciplinary approach, and enables ...
The influence of corrosion on stress concentration factor at shaft to flange radius
(Springer Netherlands, 2013)
This paper describes the influence of corrosion on stress concentration factor and crack initiation at shaft-flange transition section. The real turbine shaft failure case study is used for research. This case study and ...
Management of forest unit “Debeljak Medenovac” as a model example in ecological and energy value estimation of wood biomass
(Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2014)
The research aimed at presenting an example on how biomass production could be managed,
ecologically and energy value of biomass calculated, how it can be used and under which
conditions as well as how is the quantity ...
A Theoretical Model for Vibro-Impact Dynamics of Spur Gears with Tooth Flanks Wear
(Springer Nature, 2020)
The main performance of involute gears operation leads to the appearance of nonlinear dynamic behavior and impact. In this chapter the influence of mild wear of the tooth flanks of gears without machine finishing and surface ...
Defects in casting caused by hyman error
(3rd International Symposium of Natural Resources Management, Zaječar 30-31 May 2013, Proceedings, 2013)
This paper analysed the influence of various factors on moulding discontinuities and moulding quality. The research established that most causes were rooted in a casting process itself, such as: the method of alloy ...
Design of the breeder zone for the eu helium cooled pebble bed test blanket module for iter
(Proceedings - Symposium on Fusion Engineering, 2009)
This paper summarizes the design and development activities for the EU Helium Cooled Pebble Bed Test Blanket Module (HCPB TBM) Breeder Zone (BZ) performed in 2007 and 2008. The BZ design, based on two parallel cooling ...
Improvement of environment quality by the arsenic phytoremediation from ashes
(Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2014)
The objective of this paper is to investigate possibility of environment quality improvement of
landfill ashes by a new technology of phytoremediation. The research included an analysis of
the adsorption of arsenic, ...
Management of water quality in reservoirs in correlation with environment
(Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2014)
The main objective for the conducted research presented in this paper was to quantify, analyze
reversibility of the algal bloom process and present changes in water quality parameters in the
function of time, depth and ...