Претраживање
Приказ резултата 21-30 од 52
Application of numerical methods in design and analysis of heart valve prostheses mechanical behaviour
(2015)
In this paper the analysis of existing design of mechanical heart valves is presented, as well as the
application of advanced numerical methods, primarily the finite element method for the design and analysis of these ...
Wärmeübertrager
(Van Basshuysen/Shäfer (Hrsg.), Vieweg, GWV Fachverlage, Wiesbaden, 2006)
Die im Automobilbau verwendeten Wärmeübertrager zeichnen sich durch einen hohen Wärmeaustauschgrad und kompakte Abmasse aus. Die übertragene Wärmemenge wird durch die Wärmeübergangskoeffizienten an den beteiligten Oberflächen, ...
Technological and Economic Assessment of Different Models of Geometrically Complex Forms of Glass Envelopes
(Delft: TU Delft Open, 2018)
The main concern of this research is to create links and interactive relationship between the design process on the conceptual level, materialization and realization of geometrically complex form of glass envelope. Based ...
UTILIZATION OF THE FLUE GAS WASTE HEAT BY THE LOW-PRESSURE ECONOMIZER AT 350 MWE LIGNITE-FIRED POWER PLANT
(Beograd : Društvo termičara Srbije, 2023)
Potential for the waste heat utilization in coal-fired thermal power plants that are in operation for a long period is reflected in an increased temperature of the flue gas at the exit of the regenerative air heater. After ...
Review: Advantages of Repairing Machine Parts in Order to Restore their Functionality
(Advanced Materials Research, 2022)
This paper covers the literature review of the work by author, who have been involved in
the subject of machine element repairing from the techno-economical point of view. Positive
aspects of repairing, as opposed to ...
Effect of geometrical parameters variation of the cardan joint yoke on its load capacity
(Innovative Automotive Technology – IAT 2012, 2012)
For the aims of mechanical parts and assemblies quality providing, it is necessary to meet the basic requirements of construction related to form, function, material and process development. Form of mechanical part resulted ...
Printing orientation influence on tensile strength of PA12 specimens obtained by SLS
(Springer, 2023)
Selective laser sintering (SLS) is one of the additive manufacturing technologies dedicated to the production of high-quality parts with complex geometries. Here, polyamide 12 (PA12) is a commonly used material, for ...
Fragility and vulnerability analysis of RC buildings with different shapes in the base.
(Proceedings of the 2nd Croatian Conference on Earthquake Engineering – 2CroCEE. Zagreb, Croatia - March 22 to 24, 2023, 2023)
In this paper, the seismic response of a three 5 story reinforced concrete (RC) frame system buildings is analysed through the fragility and vulnerability analyses. The constructions are designed in accordance with the ...
The influence of material infill on ABS-X flexural strength
(Springer, 2023)
This paper contains a comparison of the flexural strength results of two different samples. Both samples were made using additive manufacturing, from ABS (acrylonitrile butadiene styrene) material with the inclusion of an ...
Robustness and fragility of the RC building designed according to YU-81 and European Standards
(1st Croatian Conference on Earthquake Engineering. 22-24 March 2021 Zagreb, Croatia, 2021)
In the countries of the former Yugoslavia, the first regulations for the design of seismically resistant structures date back to 1964, and the reason for their adoption was the Skopje earthquake in 1963.
The next, much ...