Претраживање
Приказ резултата 21-30 од 121
Oxidation behavior during prolonged service of boiler tubes made of 2.25Cr1Mo and 12Cr1Mo0.3V heat resistance steels
(Elsevier Science Bv, Amsterdam, 2016)
During service of thermal power plant (TPP) units, different components are exposed to high temperature due to technological cycle of TPP unit. Service lifetimes of these components, especially boiler heating surfaces, may ...
Model analysis of complex structures - advantages of physical sub-scaled model testing and shortcomings in physical model production
(Elsevier Science Bv, Amsterdam, 2018)
The possibilities of testing real constructions strength are often limited, especially in case of large constructions. Testing on the model, instead of the actual construction, results in a great saving of money and time. ...
Development of numerical-experimental model of connecting lugs and application on the lugs calculation of container terminals
(Elsevier Science Bv, Amsterdam, 2018)
The present paper describes numerical and experimental methodology and development of the model for stress and deformation state analysis of the connecting lug of container terminals. Numerical analysis was conducted by ...
Experimental determination of brittle fracturing appearance during static indentation of materials based on stone
(Springer Heidelberg, 2017)
During micro cutting process, the presence of both ductile and brittle mode is observed. The appearance of one or the other, or the value of critical penetration depth, when transition is happening, depends on the material ...
Wear simulation of the polymer based composite sliding bearings by means of ansys
(Faculty of Engineering, University of Kragujevac, 2019)
Polymer based composite sliding bearings are increasingly applied in many industries, due to their economic (usually low cost of production) and technical (good tribological properties) benefits. In order to predict their ...
Weibull probability distribution for reactor steel 20MnMoNi55 cleavage fracture in transition temperature
(Elsevier, Amsterdam, 2020)
This paper presents the results and methods used for determining of fracture toughness of reactor steel, denoted as 20MnMoNi55, typically used for structures working at low temperatures, in transition temperature area. In ...
Heat transfer and lubrication of turboshaft motor-reducer
(Institute of Physics Publishing, 2018)
Turboshaft engines, as the rule, contains gear transmission unit - reducer and belong to the group of drive systems with the name motor-reducer. These are the compact and autonomous assemblies for various applications. In ...
Dynamic stability of high speed turboshaft engine with reducer
(Institute of Physics Publishing, 2018)
The dynamic behavior of machines which rotate at extreme high speeds is crucial for stable and long operation. In design process some dynamics calculation must be taken into account to avoid potential operation near resonance ...
Towards a unified and practical industrial model for prediction of hydrogen embrittlement and damage in steels
(Elsevier Science Bv, Amsterdam, 2016)
Bearing in mind the multiple effects of hydrogen in steels, the specific mechanism of hydrogen embrittlement (HE) is active, depending on the experimental conditions and numerous factors which can be grouped as environmental, ...
Influence of Geometry on Pressure and Velocity Distribution in Packed-bed Methanol Steam Reforming Reactor
(Amer Inst Physics, Melville, 2017)
The main tasks of this research is to propose several changes in the packed bed micro methanol steam reformer geometry in order to ensure its performance. The reformer is an integral part of the existing indirect internal ...