Претраживање
Приказ резултата 1-10 од 63
Energy efficiency of residential buildings in Serbia
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2010)
In this paper, presented is the stale-of-the-art of energy Efficiency of residential buildings in Serbia. Special attention is paid to energy efficiency in already existing buildings. The average energy consumption in ...
Reconstruction of the aero-mixture channels of the pulverized coal plant of the 100 MW power plant unit
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2011)
After the last revitalization of thermal power block of 100 MW in TPP 'Kostolac A', made in the year 2004, during the operation of the plant, pulverized coal deposition often occurred in horizontal sections of the aero-mixture ...
The effect of bowl-in-piston geometry layout on fluid flow pattern
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2011)
In this paper some results concerning the evolution of 3-D fluid flow pattern through all four strokes in combustion chambers with entirely different bowl-in-piston geometry layouts ranging from 'omega' to 'simple cylinder' ...
A coupled thermo-mechanical model of friction stir welding
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2012)
A coupled thermo-mechanical model was developed to study the temperature fields, the plunge force and the plastic deformations of Al alloy 2024-T351 under different rotating speed: 350, 400, and 450 rpm, during the friction ...
Theoretical-experimental determining of cooling time (t8/5) in hard facing of steels for forging dies
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2010)
This paper investigates the accuracy of analytical, empirical, and numerical expressions, i. e. the most favourable methods for calculating the cooling time from 800 to 500°C (t8/5). The degree of accuracy of time t8/5 is ...
Energetic analysis of hard facing and weld cladding of an air powered drop hammer damaged ram
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2010)
This paper studies problems of hard facing of damaged and initially cracked mechanical engineering heavy parts of complex geometry such as large rams of air powered drop hammers. During long-term exploitation, these parts ...
Some subtleties concerning fluid flow and turbulence modeling in 4-valve engines
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2011)
In this paper some results concerning the structure and evolution of fluid flow pattern during induction and compression in 4- valve engines with tilted valves were presented. Results were obtained by dint of multidimensional ...
The possibilities for measurement and characterization of diesel engine fine particles: A review
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2011)
This review paper considers possible instrumentation for diesel engine fine particles exhaust emission evaluation. The modern diesel engines have extremely low particles emission almost at the level of measurement error ...
Thermomechanical modelling the resistance welding of PbSb alloy
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2010)
The analytical modelling of the PbSb alloy resistance spot welding process has been developed on the basis of mathematical analysis of thermomechanical conservation laws. The numerical solution of partial differential ...
Heat input effect of friction stir welding on aluminum alloy aa 6061-t6 welded joint
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2016)
The paper deals with the heat input and maximum temperature developed during friction stir welding with different parameters. Aluminum alloy (AA 6061-T6) has been used for experimental and numerical analysis. Experimental ...