Претраживање
Приказ резултата 1-10 од 16
Fracture and fatigue behaviour of implants made of Ti alloys
(Elsevier B.V., 2019)
This paper presents an analysis of Ti alloys used in biomedical applications, such as artificial joint implants and fixation plates, from a fracture mechanics perspective, including fatigue crack initiation and propagation ...
Fracture behavior of reactor steel 20MnMoNi 55 in the transition temperature region
(Elsevier B.V., 2021)
The fracture represents the final phase of crack propagation, and the causes of their occurrence or partial crack propagation in the real constructions made of ferritic steels can be different. Along with cracks, influences ...
Numerical simulation of crack growth in a welded joint with defects
(Elsevier B.V., 2021)
Research presented in this paper involves the numerical simulation of crack growth in a welded joint made of common structural steel S235JR2, but with the presence of a number of different welding defects, which represents ...
Numerical simulation of fatigue crack growth in AA6156 T6 panels
(Elsevier B.V., 2021)
Fatigue crack growth in a panel with 4 stringers and 3-clips, made of AA6156 T6, was modelled numerically using xFEM. The central crack of the length a=17 mm was propagated in the total of 91 steps (in each step crack ...
Crack path direction in plane-strain fracture toughness assessment tests of quasi-brittle PLA polymer and ductile PLA-X composite
(Elsevier BV, 2022)
Plane-strain fracture toughness is one of the main parameters in linear elastic fracture mechanics and its purpose is to show the material capability to withstand load while having a defect. Main validity aspect for such ...
Influence of printing parameters on the eligibility of plane-strain fracture toughness results for PLA polymer
(Elsevier B.V., 2022)
The majority of manufacturers of polymer filaments for FDM technology rely their datasheets only on tensile tests, so their documentation usually lacks any data concerning fracture mechanics parameters. Having in mind the ...
Editorial of the 2nd IRAS conference
(Procedia Structural Integrity, 2023)
The Second International Symposium on Risk Analysis and Safety of Complex Structures and Components (IRAS 2023) took place between 2-4 April 2023 at the Faculty of Mechanical Engineering of the University of Belgrade. The ...
Side-groove effect on fracture mechanical fatigue testing of PLA material
(Elsevier BV, 2022)
PLA polymer is probably the most used thermoplastic material in FDM technology nowadays. Besides prototyping purposes, FDM materials are also considered for functional application use, thanks to the fast fabrication of ...
Predicting fatigue crack growth in complex geometries using numerical methods
(Procedia Structural Integrity, 2023)
Fatigue cracks growth in three different wing spar geometries is simulated using xFEM, as the most suitable numerical method for this purpose. The goal of this analysis was to find out how crack paths affect number of ...
Numerical simulation of fatigue crack growth in Ti-Al6-V4 hip implants under different exploitation conditions
(Procedia Structural Integrity, 2023)
One of the most important aspects of materials typically used in biomedical engineering is their resistance to various unfavourable exploitation conditions, which greatly impact their work life. In terms of extreme conditions, ...