Претраживање
Приказ резултата 1-10 од 205
Thermohydraulic experimental design for the European Helium-Cooled-Pebble-Bed Test Blanket Module
(Elsevier Science Sa, Lausanne, 2008)
The peculiarities of the coolant flow in Helium-Cooled-Pebble-Bed Test Blanket Module (TBM) are (i) very intensive heating of the first wall from the plasma side and (ii) very complicated geometry of How domain consisting ...
Uticaj ekvivalentnog sadržaja kiseonika u mešavini gasova na strukturu i žilavost metala šava mikrolegiranih čelika / The influence of the oxygen equivalent in a gas-mixture on the structure and toughness of microalloyed steel weldments
(Srpsko hemijsko društvo, Beograd, 2006)
Ispitivanja su izvedena na dva čelika. Prvi je mikrolegiran sa Nb, a drugi sa: Ti, Nb i V. Žilavost metala šava navedenih čelika je određena na instrumentiranom Šarpijevom klatnu. Pet različitih mešavina gasova (Ar, CO2, ...
Study of the simulated heat affected zone of creep resistant 9-12% advanced chromium steel
(Taylor & Francis Inc, Philadelphia, 2008)
Global warming leads to research-development attempts worldwide with a view to reduce CO2 emission. Therefore, in the energy supply sector, a special focus has been directed to further development of steels that can endure ...
Microstructure Changes of Nickel-Base Superalloys Induced by Interaction with Femtosecond Laser Beam
(Polish Acad Sciences Inst Physics, Warsaw, 2009)
The investigation was performed on nickel-base superalloys, with nickel being the most influential alloying ingredient. After thermo-mechanical preparation and corresponding processing, femtosecond laser beam machining has ...
Micromechanical estimates of the critical values of j-integral for the steel of steam pipelines
(Springer, New York, 2009)
We analyze the level of damage to 14MoV63 steel for steam pipelines under the conditions of crack-growth initiation according to the mechanism of ductile fracture. The state of the material after service for about 100,000 ...
Transition temperature and fracture mode of as-castand austempered ductile iron
(Wiley, Hoboken, 2008)
The ductile to brittle transition temperature is a very important criterion that is used for selection of materials in some applications, especially in low-temperature conditions. For that reason, in this paper transition ...
Radiation Absorption Characteristics of Titanium Alloys
(Polish Acad Sciences Inst Physics, Warsaw, 2009)
Titanium alloys have found numerous applications in space research, and nuclear industry and research. Since X-rays constitute an important part of the space radiation environment, numerical simulations of radiation ...
Energy efficiency of residential buildings in Serbia
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2010)
In this paper, presented is the stale-of-the-art of energy Efficiency of residential buildings in Serbia. Special attention is paid to energy efficiency in already existing buildings. The average energy consumption in ...
Reconstruction of the aero-mixture channels of the pulverized coal plant of the 100 MW power plant unit
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2011)
After the last revitalization of thermal power block of 100 MW in TPP 'Kostolac A', made in the year 2004, during the operation of the plant, pulverized coal deposition often occurred in horizontal sections of the aero-mixture ...
The effect of bowl-in-piston geometry layout on fluid flow pattern
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2011)
In this paper some results concerning the evolution of 3-D fluid flow pattern through all four strokes in combustion chambers with entirely different bowl-in-piston geometry layouts ranging from 'omega' to 'simple cylinder' ...