Претраживање
Приказ резултата 1-10 од 48
HETRA experiment for investigation of heat removal from the first wall of helium-cooled-pebble-bed test blanket module
(Elsevier Science Sa, Lausanne, 2011)
This paper presents an experimental test section which has been developed at the Institute for Neutron Physics and Reactor Technique in Karlsruhe Institute of Technology for investigations of heat removal from the first ...
Compressive strains and displacement in a partially dentate lower jaw rehabilitated with two different treatment modalities
(Wiley, Hoboken, 2012)
Background: Understanding of the biomechanical consequences of the stresses generated to the supporting bone during occlusal loading is significant for improving the design and clinical planning process in partial edentulism ...
Estimation of the number of trays for natural gas triethylene glycol dehydration column
(Elsevier, Amsterdam, 2011)
The paper deals with the tray-to-tray method for determining the required number of trays in columns with intensive entrainment of liquid when the operating line of the "dry working regime" is not straight and with a small ...
Load-bearing steel structure diagnostics on bucket wheel excavator, for the purpose of failure prevention
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
The appearance of cracks on load-bearing steel structure of compact, hydraulic bucket wheel excavator was a perennial problem. Unfavourable stress concentration, inadequate geometry and structure of materials, inadequate ...
Experimental studies on active vibration control of smart plate using a modified PID controller with optimal orientation of piezoelectric actuator
(Sage Publications Ltd, London, 2016)
This paper presents a design, development and experimental verification of an active vibration control system of aluminum plate. The active structure consists of an aluminum rectangular plate as the host structure, strain ...
Geometry, mechanical and ballistic properties of ADI material perforated plates
(Elsevier Sci Ltd, Oxford, 2015)
In this paper, austempered ductile iron has been evaluated as an alternative to steel for perforated plates applied in the ballistic protection of military vehicles. The austempering was performed in lower and higher ...
Experimental studies on active vibration control of a smart composite beam using a PID controller
(IOP Publishing Ltd, Bristol, 2013)
This paper presents experimental verification of the active vibration control of a smart cantilever composite beam using a PID controller. In order to prevent negative occurrences in the derivative and integral terms in a ...
Optimal vibration control of smart composite beams with optimal size and location of piezoelectric sensing and actuation
(Sage Publications Ltd, London, 2013)
Control performances of smart structures depend on the size and location of the piezoelectric actuators and sensors as well as on the applied control algorithm. This article presents optimal vibration control of a thin-walled ...
Fracture assessment of seam and seamless steel pipes by application of the ring-shaped bending specimens
(Elsevier, Amsterdam, 2019)
The topic of this work is analysis of fracture behaviour and resistance of the thin-walled seamless and seam steel pipes, through application of the recently proposed ring-shaped specimen (PRNB - Pipe Ring Notched Bend). ...
Experimental and numerical investigations of heat transfer in the first wall of Helium-Cooled-Pebble-Bed Test Blanket Module - Part 1: Presentation of test section and 3D CFD model
(Elsevier Science Sa, Lausanne, 2015)
This paper deals with cooling of the first wall of Helium-Cooled-Pebble-Bed Test Blanket Module (HCPB TBM) for ITER. The first wall cooling is an important investigation issue due to an extreme asymmetry of heat loads: ...