Search
Now showing items 1-10 of 54
Reparation of the damaged forging hammer mallet by hard facing and weld cladding
(Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek, 2009)
In this paper the problems related to the maintenance of large forging mallets of pneumatic hammers including hard facing of cracked or worn working surfaces are considered. Actually, the choice of optimum technology for ...
Practical aspects of fail-safe design - calculation of fatigue life of cracked thin-walled structures
(Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek, 2011)
This paper represents fatigue crack growth life prediction in thin-walled structures (plates or shells). There are two analysis results from two different packages of software: NASGRO and FRANC 3D. They are based on Finite ...
Numerical analysis of constraint effect on ductile tearing in strength mismatched welded cct specimens using micromechanical approach
(Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek, 2011)
In this paper, constraint effect on ductile fracture initiation and propagation has been studied. Three-dimensional finite element analyses of mismatched welded joints made of high strength steel, have been performed for ...
Numerical and experimental strength analysis of fire-tube boiler construction
(Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek, 2011)
Norms, such as EN 12952-3 and EN 12953-3 handle the issues concerned with calculation of the pressurized boiler components, not however considering the influences of thermal strains that are often of vital importance for ...
Structural life assessment of oil rig pipes made of api j55 steel by high frequency welding
(Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek, 2013)
Structural life of welded pipes made of API J55 steel by high-frequency (HF) welding has been evaluated. Experimental tests of base metal mechanical properties, including fatigue properties, were conducted on pipes after ...
Improving structure dynamic behaviour using a reanalysis procedures technique
(Univ Osijek, Tech Fac, Slavonski Brod, 2013)
The present paper deals with the problem of improving dynamic characteristics for a sub-structure of bucket wheel excavator. The procedure is concerned with the analysis of the distribution of potential and kinetic energy ...
Impact of the life cycle of company to job satisfaction
(Univ Osijek, Tech Fac, Slavonski Brod, 2016)
There is increased evidence indicating that employees who experience high levels of job satisfaction are also more productive. The job satisfaction is affected by Internal and external factors. The aim of this study was ...
Compatibility of fracture mechanics parameters and fatigue crack growth parameters in welded joint behaviour evaluation
(Strojarski Facultet, 2013)
Problem of fracture toughness, K-Ic, determination on a crack tip localized in a welded joint is set in principle, since fracture mechanics presumes homogeneous material, not only in a crack tip surrounding but on a distance ...
Potential for improvement of comfort parameters in off-road vehicles of Serbian armed forces
(Strojarski Facultet, 2014)
The paper presents the comparative results of comfort parameter testing inside the cabin of Land Rover Defender off-road vehicles. The measurements were carried out on two vehicle models -110 GS Hard Top and 110 GS Soft ...
Experimental and numerical research of mechanical behaviour of titanium alloy hip implant
(Univ Osijek, Tech Fac, Slavonski Brod, 2017)
Experimental and numerical research of mechanical behaviour of hip replacement implant is presented. Experimental analysis was based on standard methods for testing mechanical properties and application of Digital Image ...