Search
Now showing items 1-10 of 521
Effects of structure characteristics on mechanical properties of aluminum alloy matrix composites
(Trans Tech Publications Ltd, 2004)
Composite materials based on the CW67 alloy (Al base matrix) and volume fraction of 15 pet of SiC particles in two nominal sizes (0.7 μm and 33 μm) have been produced by hot pressing. The fracture behavior of the composite ...
Prof. Ivan Petrovic, PhD, M. Arch (1932-2000)
(Elsevier, Amsterdam, 2002)
Determination of moist air drying ability using chemical potential of water vapour
(Taylor & Francis Inc, Philadelphia, 1998)
A thermodynamically simple method for calculation of chemical potential of water vapour, contained in the unsaturated moist air used as a drying medium in convective dryers, is developed. The introduced concept enables ...
Conservation law of J integral type for non-stationary time dependent fracture mechanics
(Kluwer Academic Publishers, 1994)
Application of two independent measurement techniques for determination of ductile crack growth initiation
(Springer Netherlands, 1999)
Charpy impact testing of the high strength low-alloyed steel has been performed by simultaneously recording two independent signals. The magnetic emission (ME) and potential drop (PD) techniques were used to determine ...
Crystallographic orientations of Ni3Al-based aluminide
(Elsevier Science Inc, New York, 2000)
Inverse pole figures have been plotted to determine preferred crystallographic orientations in a powder-compacted Ni3Al aluminide prealloyed with Fe, Ti and B. The main textural components, although weak, were noticeably ...
An experimental investigation into the operational safety of a welded penstock by a fracture mechanics approach
(Fatigue & Fracture of Engineering Materials & Structures, 1995)
Abstract—Three different fracture mechanics approaches were applied to two full‐scale penstock model tests. The two models were produced, using a Sumiten 80P HSLA steel (minimum yield strength 700 MPa and minimum ultimate ...
Crack significance evaluation with special reference to welded structures
(Plenum Publ Corp, New York, 1996)
Fracture mechanics parameters (stress intensity factor K-I and its critical value K-Ic, crack opening displacement, and the contour J integral) are originally defined for static and quasistatic loading conditions. On the ...
Numerical and experimental investigation of cooling rates in a spherical casting
(FMJ Int Publications Ltd, Redhill, 1994)
Numerical and experimental investigation of cooling rates in spherical casting (rolling balls made of white alloyed iron) was performed. Temperature history was determined by measurement, using thermocouples (Pt-Pt/Rh), ...
Microstructure and toughness of CuNiMo austempered ductile iron
(Elsevier, Amsterdam, 2004)
The effect of austempering on the microstructure and toughness of nodular cast iron (designated as CuNiMoSG) alloyed with molybdenum, copper, nickel, and manganese has been studied. Light microscopy (LM), scanning electron ...