Претраживање
Приказ резултата 31-38 од 38
Spur gear model for prediction of fatigue damage initiation in contact zone
(International Journal of Powertrains – „Special Issue on Technologies and Models for High Power Density Geared Powertrains", 2016)
The objective of this paper is to give a new viewpoint in contact fatigue assessment in the spur gears. The presented research is based on up-to-date methods and multidisciplinary approach, and enables direct prediction ...
NUMERICAL ANALYSIS OF STATIC STRESSES IN PARTIAL HIP IMPLANT
(STRUCTURAL INTEGRITY AND LIFE, 2024)
Research presented here involves numerical analysis of stresses in partial hip implant subjected to static loads, for two cases of patient weight. The numerical analysis requires the development of 3D models that would ...
Application of numerical methods in design and analysis of heart valve prostheses mechanical behaviour
(2015)
In this paper the analysis of existing design of mechanical heart valves is presented, as well as the
application of advanced numerical methods, primarily the finite element method for the design and analysis of these ...
Crack Growth Rate Analysis of Stress Corrosion Cracking
(Univ Osijek, Tech Fac, Slavonski Brod, 2021)
A theoretical film rupture model was used for computational procedure to predict the crack growth rate within the Stress Corrosion Cracking (SCC) conditions. Chemical, electrochemical and mechanical aspects of the SCC were ...
Analysis of the supporting structure of composite material tool machine using the finite element method / Analiza noseće konstrukcije alatnog stroja od kompozitnog materijala metodom konačnih elemenata
(Strojarski fakultet u Slavonskom Brodu; Fakultet elektrotehnike, računarstva i informacijskih tehnologija Osijek; Građevinski i arhitektonski fakultet Osijek Tehnički vjesnik / Technical Gazette, Trg Ivane Brlić-Mažuranić 2, 35000 Slavonski Brod, 2015)
Machines aimed for different purposes must be designed taking into account specific shape, type of load and materials they are made of. Nowadays
different design solutions can easily be examined by using the finite element ...
Experimental and numerical investigation of Ti-6Al-4V alloy behaviour under different exploitation conditions
(Society for Structural Integrity and LifeIMS Institute, 2022)
The paper involves experimental testing of titanium alloy Ti-6Al-4V specimens, based on which numerical models are made to provide the basis for further investigation. Due to the exploitation conditions these implants are ...
Numerical simulation of crack growth in welded joints in the presence of multiple defects
(The 27th International Conference on Fracture and Structural Integrity, 2023)
Simulation of crack initiation and propagation which occurred during the tensile
testing of real welded joint specimens made of low-alloyed low-carbon structural
steels is presented in this paper. Welded joints in questions ...
Numerical and experimental determination of stress concentration factor for a pipe branch model
(Univ Osijek, Tech Fac, Slavonski Brod, 2017)
The subject of this paper is testing of complex geometrical structures, i.e. stress analysis of a pipe branch model of A6 third pipeline at Hydropower Plant Perucica, Niksic. Analysis of pipe branch model stress distribution ...