Претраживање
Приказ резултата 31-40 од 54
Numerical Simulation of Fatigue Crack Growth in Titanium Alloy Orthopaedic Plates
(Univ Osijek, Tech Fac, Slavonski Brod, 2020)
Biomaterials intended for orthopaedic plates manufacturing have much higher mechanical properties relative to the bone itself and still there are many cases where those plates fracture in service, with fatigue as the main ...
Effect of Over-Pressure on Pipeline Structural Integrity
(Univ Osijek, Tech Fac, Slavonski Brod, 2019)
The effect of proof over-pressure on pipeline structural integrity using fracture mechanics parameters is analysed in the case of pipeline in Reversed Hydro Power Plant, made of High Strength Low Alloyed steel with 800 MPa ...
Numerical-Experimental Determination of Stress and Deformation State in Connecting Lugs with the Effect of Contact Area Size
(Univ Osijek, Tech Fac, Slavonski Brod, 2019)
The present paper describes numerical and experimental methodology for the analysis of stress and deformation state in structural elements with geometrical discontinuities. The research is based on structural elements of ...
Analytical vs Numerical Calculation of Fatigue Life for Different Welded Joint Regions
(Univ Osijek, Tech Fac, Slavonski Brod, 2020)
This research will show the analytical way of determining the remaining life of a welded joint with a fatigue crack initiated in its heat affected zone. The calculation will be divided into two stages, since the fatigue ...
Structural Integrity Assessment of Welded Pipeline Designed with Reduced Safety
(Univ Osijek, Tech Fac, Slavonski Brod, 2020)
The main goal of this paper was to assess the integrity of welded joints in the main pipeline of the reversible hydropower plant "Bajina Bata". Japanese steel Sumiten 80P (SM 80P) was used as the parent material. European ...
Application of Fracture Mechanics Parameters to Spherical Storage Tank Integrity Assessment
(Univ Osijek, Tech Fac, Slavonski Brod, 2020)
Fracture mechanics parameters have been applied to assess pressure vessel integrity. The pressure vessel analysed here was the ammonia spherical tank (volume of 1800 m(3), outer diameter 15.12 m, thickness 30 mm) where ...
Procedure for Creating Personalized Geometrical Models of the Human Mandible and Corresponding Implants
(Univ Osijek, Tech Fac, Slavonski Brod, 2019)
The greatest challenge in engineering of human mandible implants lies in its customization for each patient individually, by adapting them to the patient's anatomical, morphological and physiological characteristics. This ...
Physical and metallurgic changes during the friction welding of high-speed cutting steel and tempered steel
(Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek, 2009)
This paper outlines the basic principles of welding by friction of high-speed cutting steel and tempered steel from the viewpoint of metallurgic processes that are going on in the material. The bases of welding by friction ...
Estimate of a power distributor life span based on the fracture mechanics criteria
(Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek, 2011)
Dimensioning of pressure vessels can be done according to various criteria, the basic one being the safety against the fracture by splashing. In this paper two methods for this dimensioning procedure are presented. The ...
Impact of the life cycle of company to job satisfaction
(Univ Osijek, Tech Fac, Slavonski Brod, 2016)
There is increased evidence indicating that employees who experience high levels of job satisfaction are also more productive. The job satisfaction is affected by Internal and external factors. The aim of this study was ...