Experimental Dimensional Accuracy Analysis of Reformer Prototype Model Produced by FDM and SLA 3D Printing Technology
Samo za registrovane korisnike
2019
Autori
Milovanović, AleksaMilošević, Miloš
Mladenović, Goran
Likozar, Blaz
Čolić, Katarina
Mitrović, Nenad
Konferencijski prilog (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
The subject of this paper is the evaluation of the dimensional accuracy of FDM and SLA 3D printing technologies in comparison with developed reformer polymer electrolyte membrane (PEM) fuel cell CAD model. 3D printing technologies allow a bottom-up approach to manufacturing, by depositing material in layers to final shape. Dimensional inaccuracy is still a problem in 3D printing technologies due to material shrinking and residual stress. Materials used in this research are PLA (Polylactic Acid) for FDM technology and the standard white resin material for SLA technology. Both materials are commonly used for 3D printing. PLA material is printed in three different height resolutions: 0.3 mm, 0.2 mm and 0.1 mm. White resin is printed in 0.1 mm height resolution. The aim of this paper is to show how layer height affects the dimensional accuracy of FDM models and to compare the dimensional accuracy of FDM and SLA printed reformer models with the same height resolution.
Ključne reči:
SLA / Reformer / FDM / CAD model / 3D printingIzvor:
Experimental and Numerical Investigations in Materials Science and Engineering, 2019, 54, 84-95Izdavač:
- Springer International Publishing Ag, Cham
Finansiranje / projekti:
- NATO SPS Project [EAP.SFPP 984738]
- Razvoj savremenih metoda dijagnostike i ispitivanja mašinskih struktura (RS-MESTD-Technological Development (TD or TR)-35040)
- Održivost i unapređenje mašinskih sistema u energetici i transportu primenom forenzičkog inženjerstva, eko i robust dizajna (RS-MESTD-Technological Development (TD or TR)-35006)
- Istraživanje klimatskih promena i njihovog uticaja na životnu sredinu - praćenje uticaja, adaptacija i ublažavanje (RS-MESTD-Integrated and Interdisciplinary Research (IIR or III)-43007)
DOI: 10.1007/978-3-319-99620-2_7
ISSN: 2367-3370
WoS: 000495600600007
Scopus: 2-s2.0-85063232520
Institucija/grupa
Inovacioni centarTY - CONF AU - Milovanović, Aleksa AU - Milošević, Miloš AU - Mladenović, Goran AU - Likozar, Blaz AU - Čolić, Katarina AU - Mitrović, Nenad PY - 2019 UR - https://machinery.mas.bg.ac.rs/handle/123456789/3109 AB - The subject of this paper is the evaluation of the dimensional accuracy of FDM and SLA 3D printing technologies in comparison with developed reformer polymer electrolyte membrane (PEM) fuel cell CAD model. 3D printing technologies allow a bottom-up approach to manufacturing, by depositing material in layers to final shape. Dimensional inaccuracy is still a problem in 3D printing technologies due to material shrinking and residual stress. Materials used in this research are PLA (Polylactic Acid) for FDM technology and the standard white resin material for SLA technology. Both materials are commonly used for 3D printing. PLA material is printed in three different height resolutions: 0.3 mm, 0.2 mm and 0.1 mm. White resin is printed in 0.1 mm height resolution. The aim of this paper is to show how layer height affects the dimensional accuracy of FDM models and to compare the dimensional accuracy of FDM and SLA printed reformer models with the same height resolution. PB - Springer International Publishing Ag, Cham C3 - Experimental and Numerical Investigations in Materials Science and Engineering T1 - Experimental Dimensional Accuracy Analysis of Reformer Prototype Model Produced by FDM and SLA 3D Printing Technology EP - 95 SP - 84 VL - 54 DO - 10.1007/978-3-319-99620-2_7 ER -
@conference{ author = "Milovanović, Aleksa and Milošević, Miloš and Mladenović, Goran and Likozar, Blaz and Čolić, Katarina and Mitrović, Nenad", year = "2019", abstract = "The subject of this paper is the evaluation of the dimensional accuracy of FDM and SLA 3D printing technologies in comparison with developed reformer polymer electrolyte membrane (PEM) fuel cell CAD model. 3D printing technologies allow a bottom-up approach to manufacturing, by depositing material in layers to final shape. Dimensional inaccuracy is still a problem in 3D printing technologies due to material shrinking and residual stress. Materials used in this research are PLA (Polylactic Acid) for FDM technology and the standard white resin material for SLA technology. Both materials are commonly used for 3D printing. PLA material is printed in three different height resolutions: 0.3 mm, 0.2 mm and 0.1 mm. White resin is printed in 0.1 mm height resolution. The aim of this paper is to show how layer height affects the dimensional accuracy of FDM models and to compare the dimensional accuracy of FDM and SLA printed reformer models with the same height resolution.", publisher = "Springer International Publishing Ag, Cham", journal = "Experimental and Numerical Investigations in Materials Science and Engineering", title = "Experimental Dimensional Accuracy Analysis of Reformer Prototype Model Produced by FDM and SLA 3D Printing Technology", pages = "95-84", volume = "54", doi = "10.1007/978-3-319-99620-2_7" }
Milovanović, A., Milošević, M., Mladenović, G., Likozar, B., Čolić, K.,& Mitrović, N.. (2019). Experimental Dimensional Accuracy Analysis of Reformer Prototype Model Produced by FDM and SLA 3D Printing Technology. in Experimental and Numerical Investigations in Materials Science and Engineering Springer International Publishing Ag, Cham., 54, 84-95. https://doi.org/10.1007/978-3-319-99620-2_7
Milovanović A, Milošević M, Mladenović G, Likozar B, Čolić K, Mitrović N. Experimental Dimensional Accuracy Analysis of Reformer Prototype Model Produced by FDM and SLA 3D Printing Technology. in Experimental and Numerical Investigations in Materials Science and Engineering. 2019;54:84-95. doi:10.1007/978-3-319-99620-2_7 .
Milovanović, Aleksa, Milošević, Miloš, Mladenović, Goran, Likozar, Blaz, Čolić, Katarina, Mitrović, Nenad, "Experimental Dimensional Accuracy Analysis of Reformer Prototype Model Produced by FDM and SLA 3D Printing Technology" in Experimental and Numerical Investigations in Materials Science and Engineering, 54 (2019):84-95, https://doi.org/10.1007/978-3-319-99620-2_7 . .