Influence of Friction Welding Parameters on Properties of the Al-Cu Joint
2017
Autori
Ratković, Nada R.Arsić, Dušan M.
Lazić, Vukić
Nikolić, Ružica R.
Hadzima, Branislav
Palcek, Peter
Sedmak, Aleksandar
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
In this paper is presented a theoretical-experimental analysis of the aluminum-copper joining by friction welding. Considering that such Al-Cu bimetal joints are widely applied in industrial practice, experimental analysis in this paper was performed on the concrete elements used in electronics. The fact that the joining is done of the two dissimilar materials points to complexity of the problem, since phenomena that appear in the joint zone extremely influence physical, mechanical and structural properties of the welded/base metals. Besides the theoretical analysis of the basic phases and mechanisms of the friction welding process, the research also included experimental analysis of the geometry changes due to the plastic deformation, the change of microstructure and hardness in the joint zone, as well as of the basic mechanical properties of the Al-Cu joint, such as tensile strength. This paper presents some significant results, which point to the possibility for realization of the r...eliable joints of the two dissimilar metals.
Ključne reči:
microstructure / mechanical properties / Friction welding / copper / bimetal joint / aluminumIzvor:
FME Transactions, 2017, 45, 1, 165-171Izdavač:
- Univerzitet u Beogradu - Mašinski fakultet, Beograd
Finansiranje / projekti:
- Slovak state budget by the project "Research Centre of the University of Zilina" - ITMS [26220220183]
- Istraživanje mogućnosti unapređenja tehnologije zavarivanja mikrolegiranih čelika (RS-MESTD-Technological Development (TD or TR)-35024)
- Mikromehanički kriterijumi oštećenja i loma (RS-MESTD-Basic Research (BR or ON)-174004)
DOI: 10.5937/fmet1701165R
ISSN: 1451-2092
WoS: 000408082100026
Scopus: 2-s2.0-85011349806
Institucija/grupa
Inovacioni centarTY - JOUR AU - Ratković, Nada R. AU - Arsić, Dušan M. AU - Lazić, Vukić AU - Nikolić, Ružica R. AU - Hadzima, Branislav AU - Palcek, Peter AU - Sedmak, Aleksandar PY - 2017 UR - https://machinery.mas.bg.ac.rs/handle/123456789/2589 AB - In this paper is presented a theoretical-experimental analysis of the aluminum-copper joining by friction welding. Considering that such Al-Cu bimetal joints are widely applied in industrial practice, experimental analysis in this paper was performed on the concrete elements used in electronics. The fact that the joining is done of the two dissimilar materials points to complexity of the problem, since phenomena that appear in the joint zone extremely influence physical, mechanical and structural properties of the welded/base metals. Besides the theoretical analysis of the basic phases and mechanisms of the friction welding process, the research also included experimental analysis of the geometry changes due to the plastic deformation, the change of microstructure and hardness in the joint zone, as well as of the basic mechanical properties of the Al-Cu joint, such as tensile strength. This paper presents some significant results, which point to the possibility for realization of the reliable joints of the two dissimilar metals. PB - Univerzitet u Beogradu - Mašinski fakultet, Beograd T2 - FME Transactions T1 - Influence of Friction Welding Parameters on Properties of the Al-Cu Joint EP - 171 IS - 1 SP - 165 VL - 45 DO - 10.5937/fmet1701165R ER -
@article{ author = "Ratković, Nada R. and Arsić, Dušan M. and Lazić, Vukić and Nikolić, Ružica R. and Hadzima, Branislav and Palcek, Peter and Sedmak, Aleksandar", year = "2017", abstract = "In this paper is presented a theoretical-experimental analysis of the aluminum-copper joining by friction welding. Considering that such Al-Cu bimetal joints are widely applied in industrial practice, experimental analysis in this paper was performed on the concrete elements used in electronics. The fact that the joining is done of the two dissimilar materials points to complexity of the problem, since phenomena that appear in the joint zone extremely influence physical, mechanical and structural properties of the welded/base metals. Besides the theoretical analysis of the basic phases and mechanisms of the friction welding process, the research also included experimental analysis of the geometry changes due to the plastic deformation, the change of microstructure and hardness in the joint zone, as well as of the basic mechanical properties of the Al-Cu joint, such as tensile strength. This paper presents some significant results, which point to the possibility for realization of the reliable joints of the two dissimilar metals.", publisher = "Univerzitet u Beogradu - Mašinski fakultet, Beograd", journal = "FME Transactions", title = "Influence of Friction Welding Parameters on Properties of the Al-Cu Joint", pages = "171-165", number = "1", volume = "45", doi = "10.5937/fmet1701165R" }
Ratković, N. R., Arsić, D. M., Lazić, V., Nikolić, R. R., Hadzima, B., Palcek, P.,& Sedmak, A.. (2017). Influence of Friction Welding Parameters on Properties of the Al-Cu Joint. in FME Transactions Univerzitet u Beogradu - Mašinski fakultet, Beograd., 45(1), 165-171. https://doi.org/10.5937/fmet1701165R
Ratković NR, Arsić DM, Lazić V, Nikolić RR, Hadzima B, Palcek P, Sedmak A. Influence of Friction Welding Parameters on Properties of the Al-Cu Joint. in FME Transactions. 2017;45(1):165-171. doi:10.5937/fmet1701165R .
Ratković, Nada R., Arsić, Dušan M., Lazić, Vukić, Nikolić, Ružica R., Hadzima, Branislav, Palcek, Peter, Sedmak, Aleksandar, "Influence of Friction Welding Parameters on Properties of the Al-Cu Joint" in FME Transactions, 45, no. 1 (2017):165-171, https://doi.org/10.5937/fmet1701165R . .