Measurement of thermal emission during cutting of materials using abrasive water jet
2017
Аутори
Perzel, VincentFlimel, Marian
Krolczyk, Jolanta
Sedmak, Aleksandar
Ruggiero, Alessandro
Kozak, Dražan
Stoić, Antun
Krolczyk, Grzegorz
Hloch, Sergej
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
This article deals with measurement of the thermal gradient on material during abrasive water jet cutting. The temperature was measured by thermocamera before the technological process started, during the abrasive water jet cutting process technology, and just after the cutting process. We performed measurements on several types of materials. We calculated the approximate amount of energy during the abrasive water jet cutting process technology that changes into thermoenergy, which is the current water pressure drained in a catcher tank.
Кључне речи:
thermocamera / measurement / material / abrasive water jetИзвор:
Thermal Science, 2017, 21, 5, 2197-2203Издавач:
- Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd
Финансирање / пројекти:
- Slovak Research and Development Agency [APVV-207-12]
DOI: 10.2298/TSCI150212046P
ISSN: 0354-9836
WoS: 000414237000029
Scopus: 2-s2.0-85032968712
Институција/група
Inovacioni centarTY - JOUR AU - Perzel, Vincent AU - Flimel, Marian AU - Krolczyk, Jolanta AU - Sedmak, Aleksandar AU - Ruggiero, Alessandro AU - Kozak, Dražan AU - Stoić, Antun AU - Krolczyk, Grzegorz AU - Hloch, Sergej PY - 2017 UR - https://machinery.mas.bg.ac.rs/handle/123456789/2588 AB - This article deals with measurement of the thermal gradient on material during abrasive water jet cutting. The temperature was measured by thermocamera before the technological process started, during the abrasive water jet cutting process technology, and just after the cutting process. We performed measurements on several types of materials. We calculated the approximate amount of energy during the abrasive water jet cutting process technology that changes into thermoenergy, which is the current water pressure drained in a catcher tank. PB - Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd T2 - Thermal Science T1 - Measurement of thermal emission during cutting of materials using abrasive water jet EP - 2203 IS - 5 SP - 2197 VL - 21 DO - 10.2298/TSCI150212046P ER -
@article{ author = "Perzel, Vincent and Flimel, Marian and Krolczyk, Jolanta and Sedmak, Aleksandar and Ruggiero, Alessandro and Kozak, Dražan and Stoić, Antun and Krolczyk, Grzegorz and Hloch, Sergej", year = "2017", abstract = "This article deals with measurement of the thermal gradient on material during abrasive water jet cutting. The temperature was measured by thermocamera before the technological process started, during the abrasive water jet cutting process technology, and just after the cutting process. We performed measurements on several types of materials. We calculated the approximate amount of energy during the abrasive water jet cutting process technology that changes into thermoenergy, which is the current water pressure drained in a catcher tank.", publisher = "Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd", journal = "Thermal Science", title = "Measurement of thermal emission during cutting of materials using abrasive water jet", pages = "2203-2197", number = "5", volume = "21", doi = "10.2298/TSCI150212046P" }
Perzel, V., Flimel, M., Krolczyk, J., Sedmak, A., Ruggiero, A., Kozak, D., Stoić, A., Krolczyk, G.,& Hloch, S.. (2017). Measurement of thermal emission during cutting of materials using abrasive water jet. in Thermal Science Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd., 21(5), 2197-2203. https://doi.org/10.2298/TSCI150212046P
Perzel V, Flimel M, Krolczyk J, Sedmak A, Ruggiero A, Kozak D, Stoić A, Krolczyk G, Hloch S. Measurement of thermal emission during cutting of materials using abrasive water jet. in Thermal Science. 2017;21(5):2197-2203. doi:10.2298/TSCI150212046P .
Perzel, Vincent, Flimel, Marian, Krolczyk, Jolanta, Sedmak, Aleksandar, Ruggiero, Alessandro, Kozak, Dražan, Stoić, Antun, Krolczyk, Grzegorz, Hloch, Sergej, "Measurement of thermal emission during cutting of materials using abrasive water jet" in Thermal Science, 21, no. 5 (2017):2197-2203, https://doi.org/10.2298/TSCI150212046P . .