Determination of bond strength between the hard-faced (HF) layer and the base material (BM) of forging dies
2016
Аутори
Lazić, VukićSedmak, Aleksandar
Samardžić, I.
Aleksandrović, Srbislav
Milosavljević, Dragan I.
Arsić, D.
Đorđević, M.
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
This paper points out complex working conditions of forging dies, which are the most frequent causes of their damage, and proposes suitable hard-facing repair procedures. The shear strength between the hard-faced layer and base metal has been measured using specially developed tool, and correlation between output results and the applied hard-facing technology is established.
Кључне речи:
Microstructure / Hardness / Hard-facing / Forging dies / Alloy steelИзвор:
Metalurgija, 2016, 55, 1, 91-94Издавач:
- Faculty of Metallurgy
Финансирање / пројекти:
- Истраживања и развој Српске нето-нулте енергетске куће (RS-MESTD-Technological Development (TD or TR)-33015)
- Истраживање могућности унапређења технологије заваривања микролегираних челика (RS-MESTD-Technological Development (TD or TR)-35024)
Институција/група
Inovacioni centarTY - JOUR AU - Lazić, Vukić AU - Sedmak, Aleksandar AU - Samardžić, I. AU - Aleksandrović, Srbislav AU - Milosavljević, Dragan I. AU - Arsić, D. AU - Đorđević, M. PY - 2016 UR - https://machinery.mas.bg.ac.rs/handle/123456789/2313 AB - This paper points out complex working conditions of forging dies, which are the most frequent causes of their damage, and proposes suitable hard-facing repair procedures. The shear strength between the hard-faced layer and base metal has been measured using specially developed tool, and correlation between output results and the applied hard-facing technology is established. PB - Faculty of Metallurgy T2 - Metalurgija T1 - Determination of bond strength between the hard-faced (HF) layer and the base material (BM) of forging dies EP - 94 IS - 1 SP - 91 VL - 55 UR - https://hdl.handle.net/21.15107/rcub_machinery_2313 ER -
@article{ author = "Lazić, Vukić and Sedmak, Aleksandar and Samardžić, I. and Aleksandrović, Srbislav and Milosavljević, Dragan I. and Arsić, D. and Đorđević, M.", year = "2016", abstract = "This paper points out complex working conditions of forging dies, which are the most frequent causes of their damage, and proposes suitable hard-facing repair procedures. The shear strength between the hard-faced layer and base metal has been measured using specially developed tool, and correlation between output results and the applied hard-facing technology is established.", publisher = "Faculty of Metallurgy", journal = "Metalurgija", title = "Determination of bond strength between the hard-faced (HF) layer and the base material (BM) of forging dies", pages = "94-91", number = "1", volume = "55", url = "https://hdl.handle.net/21.15107/rcub_machinery_2313" }
Lazić, V., Sedmak, A., Samardžić, I., Aleksandrović, S., Milosavljević, D. I., Arsić, D.,& Đorđević, M.. (2016). Determination of bond strength between the hard-faced (HF) layer and the base material (BM) of forging dies. in Metalurgija Faculty of Metallurgy., 55(1), 91-94. https://hdl.handle.net/21.15107/rcub_machinery_2313
Lazić V, Sedmak A, Samardžić I, Aleksandrović S, Milosavljević DI, Arsić D, Đorđević M. Determination of bond strength between the hard-faced (HF) layer and the base material (BM) of forging dies. in Metalurgija. 2016;55(1):91-94. https://hdl.handle.net/21.15107/rcub_machinery_2313 .
Lazić, Vukić, Sedmak, Aleksandar, Samardžić, I., Aleksandrović, Srbislav, Milosavljević, Dragan I., Arsić, D., Đorđević, M., "Determination of bond strength between the hard-faced (HF) layer and the base material (BM) of forging dies" in Metalurgija, 55, no. 1 (2016):91-94, https://hdl.handle.net/21.15107/rcub_machinery_2313 .