Selection of the optimal hard facing (HF) technology of damaged forging dies based on cooling time t8/5
2016
Аутори
Arsić, D.Lazić, Vukić
Sedmak, Aleksandar
Nikolić, Ružica R.
Aleksandrović, Srbislav
Đorđević, M.
Bakić, Ramo
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
In exploitation, the forging dies are exposed to heating up to very high temperatures, variable loads: compressive, impact and shear. In this paper, the reparatory hard facing of the damaged forging dies is considered. The objective was to establish the optimal reparatory technology based on cooling time t8/5. The verification of the adopted technology was done by investigation of the hard faced layers microstructure and measurements of hardness within the welded layers’ characteristic zones. Cooling time was determined theoretically, numerically and experimentally.
Кључне речи:
Microstructure / Hardness / Hard facing / Forging dies / Cooling time t8/5Извор:
Metalurgija, 2016, 55, 1, 103-106Издавач:
- Faculty of Metallurgy
Институција/група
Inovacioni centarTY - JOUR AU - Arsić, D. AU - Lazić, Vukić AU - Sedmak, Aleksandar AU - Nikolić, Ružica R. AU - Aleksandrović, Srbislav AU - Đorđević, M. AU - Bakić, Ramo PY - 2016 UR - https://machinery.mas.bg.ac.rs/handle/123456789/2312 AB - In exploitation, the forging dies are exposed to heating up to very high temperatures, variable loads: compressive, impact and shear. In this paper, the reparatory hard facing of the damaged forging dies is considered. The objective was to establish the optimal reparatory technology based on cooling time t8/5. The verification of the adopted technology was done by investigation of the hard faced layers microstructure and measurements of hardness within the welded layers’ characteristic zones. Cooling time was determined theoretically, numerically and experimentally. PB - Faculty of Metallurgy T2 - Metalurgija T1 - Selection of the optimal hard facing (HF) technology of damaged forging dies based on cooling time t8/5 EP - 106 IS - 1 SP - 103 VL - 55 UR - https://hdl.handle.net/21.15107/rcub_machinery_2312 ER -
@article{ author = "Arsić, D. and Lazić, Vukić and Sedmak, Aleksandar and Nikolić, Ružica R. and Aleksandrović, Srbislav and Đorđević, M. and Bakić, Ramo", year = "2016", abstract = "In exploitation, the forging dies are exposed to heating up to very high temperatures, variable loads: compressive, impact and shear. In this paper, the reparatory hard facing of the damaged forging dies is considered. The objective was to establish the optimal reparatory technology based on cooling time t8/5. The verification of the adopted technology was done by investigation of the hard faced layers microstructure and measurements of hardness within the welded layers’ characteristic zones. Cooling time was determined theoretically, numerically and experimentally.", publisher = "Faculty of Metallurgy", journal = "Metalurgija", title = "Selection of the optimal hard facing (HF) technology of damaged forging dies based on cooling time t8/5", pages = "106-103", number = "1", volume = "55", url = "https://hdl.handle.net/21.15107/rcub_machinery_2312" }
Arsić, D., Lazić, V., Sedmak, A., Nikolić, R. R., Aleksandrović, S., Đorđević, M.,& Bakić, R.. (2016). Selection of the optimal hard facing (HF) technology of damaged forging dies based on cooling time t8/5. in Metalurgija Faculty of Metallurgy., 55(1), 103-106. https://hdl.handle.net/21.15107/rcub_machinery_2312
Arsić D, Lazić V, Sedmak A, Nikolić RR, Aleksandrović S, Đorđević M, Bakić R. Selection of the optimal hard facing (HF) technology of damaged forging dies based on cooling time t8/5. in Metalurgija. 2016;55(1):103-106. https://hdl.handle.net/21.15107/rcub_machinery_2312 .
Arsić, D., Lazić, Vukić, Sedmak, Aleksandar, Nikolić, Ružica R., Aleksandrović, Srbislav, Đorđević, M., Bakić, Ramo, "Selection of the optimal hard facing (HF) technology of damaged forging dies based on cooling time t8/5" in Metalurgija, 55, no. 1 (2016):103-106, https://hdl.handle.net/21.15107/rcub_machinery_2312 .