Tribological behavior of ferrous-based APS coatings under dry sliding conditions
Samo za registrovane korisnike
2015
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
The use of Al-alloys for engine blocks production, instead of e.g., gray cast iron, results with weight savings and lower fuel consumption and therefore, reduces pollution. Possible solution for overcoming poor tribological properties of Al-alloys is the application of thermal spray coatings. In this paper, the tribological properties of two ferrous-based coatings were analyzed and compared with gray cast iron as a standard material for engine blocks. The process used for coating deposition on an Al-Si alloy substrate was atmospheric plasma spraying. In order to investigate the tribological behavior of these coatings under dominant adhesive and abrasive wear regime, two tests were applied with different test equipments and conditions. Both tribological tests showed that, for the investigated conditions, both coatings had improved wear resistance and lower coefficient of friction compared with gray cast iron.
Ključne reči:
friction / ferrous-based coatings / atmospheric plasma spraying / adhesive wear / abrasive wearIzvor:
Journal of Thermal Spray Technology, 2015, 24, 4, 671-682Izdavač:
- Springer, New York
Finansiranje / projekti:
- Istraživanje i optimizacija tehnoloških i funkcionalnih performansi ventilacionog mlina termoelektrane Kostolac B (RS-MESTD-Technological Development (TD or TR)-34028)
- Razvoj triboloških mikro/nano dvokomponentnih i hibridnih samopodmazujućih kompozita (RS-MESTD-Technological Development (TD or TR)-35021)
DOI: 10.1007/s11666-014-0202-2
ISSN: 1059-9630
WoS: 000351587600008
Scopus: 2-s2.0-84925452349
Kolekcije
Institucija/grupa
Mašinski fakultetTY - JOUR AU - Vencl, Aleksandar PY - 2015 UR - https://machinery.mas.bg.ac.rs/handle/123456789/2192 AB - The use of Al-alloys for engine blocks production, instead of e.g., gray cast iron, results with weight savings and lower fuel consumption and therefore, reduces pollution. Possible solution for overcoming poor tribological properties of Al-alloys is the application of thermal spray coatings. In this paper, the tribological properties of two ferrous-based coatings were analyzed and compared with gray cast iron as a standard material for engine blocks. The process used for coating deposition on an Al-Si alloy substrate was atmospheric plasma spraying. In order to investigate the tribological behavior of these coatings under dominant adhesive and abrasive wear regime, two tests were applied with different test equipments and conditions. Both tribological tests showed that, for the investigated conditions, both coatings had improved wear resistance and lower coefficient of friction compared with gray cast iron. PB - Springer, New York T2 - Journal of Thermal Spray Technology T1 - Tribological behavior of ferrous-based APS coatings under dry sliding conditions EP - 682 IS - 4 SP - 671 VL - 24 DO - 10.1007/s11666-014-0202-2 ER -
@article{ author = "Vencl, Aleksandar", year = "2015", abstract = "The use of Al-alloys for engine blocks production, instead of e.g., gray cast iron, results with weight savings and lower fuel consumption and therefore, reduces pollution. Possible solution for overcoming poor tribological properties of Al-alloys is the application of thermal spray coatings. In this paper, the tribological properties of two ferrous-based coatings were analyzed and compared with gray cast iron as a standard material for engine blocks. The process used for coating deposition on an Al-Si alloy substrate was atmospheric plasma spraying. In order to investigate the tribological behavior of these coatings under dominant adhesive and abrasive wear regime, two tests were applied with different test equipments and conditions. Both tribological tests showed that, for the investigated conditions, both coatings had improved wear resistance and lower coefficient of friction compared with gray cast iron.", publisher = "Springer, New York", journal = "Journal of Thermal Spray Technology", title = "Tribological behavior of ferrous-based APS coatings under dry sliding conditions", pages = "682-671", number = "4", volume = "24", doi = "10.1007/s11666-014-0202-2" }
Vencl, A.. (2015). Tribological behavior of ferrous-based APS coatings under dry sliding conditions. in Journal of Thermal Spray Technology Springer, New York., 24(4), 671-682. https://doi.org/10.1007/s11666-014-0202-2
Vencl A. Tribological behavior of ferrous-based APS coatings under dry sliding conditions. in Journal of Thermal Spray Technology. 2015;24(4):671-682. doi:10.1007/s11666-014-0202-2 .
Vencl, Aleksandar, "Tribological behavior of ferrous-based APS coatings under dry sliding conditions" in Journal of Thermal Spray Technology, 24, no. 4 (2015):671-682, https://doi.org/10.1007/s11666-014-0202-2 . .