Redesign of the Bucket Wheel Excavators Substructures Based on the Comparative Stress - Strain Analysis
Samo za registrovane korisnike
2012
Konferencijski prilog (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
Failures caused by heavy duty conditions, as well as the changes of technological requirements, are basic reasons for the redesign of specific substructures of the bucket wheel excavators (BWE). The efficient redesign should be based on subtle external load identification and sufficient accuracy of stress - strain states determination. This paper gives solutions of reconstruction and comparative stress analyses for original and redesigned representative and vital BWE subsystems - slewing platform, undercarriage and two wheel bogie. The efficiency of these reconstructions is unquestionably confirmed by failureless service of mentioned subsystems.
Ključne reči:
substructures / redesign / FEA / bucket wheel excavatorIzvor:
Advances in Metallurgical and Mining Engineering, 2012, 402, 660-+Izdavač:
- Trans Tech Publications Ltd, Durnten-Zurich
Finansiranje / projekti:
- Održivost i unapređenje mašinskih sistema u energetici i transportu primenom forenzičkog inženjerstva, eko i robust dizajna (RS-MESTD-Technological Development (TD or TR)-35006)
DOI: 10.4028/www.scientific.net/AMR.402.660
ISSN: 1022-6680
WoS: 000308830000127
Scopus: 2-s2.0-83655182661
Kolekcije
Institucija/grupa
Mašinski fakultetTY - CONF AU - Bošnjak, Srđan AU - Petković, Zoran D. AU - Zrnić, Nenad AU - Dunjić, Momčilo AU - Dragović, Branislav PY - 2012 UR - https://machinery.mas.bg.ac.rs/handle/123456789/1344 AB - Failures caused by heavy duty conditions, as well as the changes of technological requirements, are basic reasons for the redesign of specific substructures of the bucket wheel excavators (BWE). The efficient redesign should be based on subtle external load identification and sufficient accuracy of stress - strain states determination. This paper gives solutions of reconstruction and comparative stress analyses for original and redesigned representative and vital BWE subsystems - slewing platform, undercarriage and two wheel bogie. The efficiency of these reconstructions is unquestionably confirmed by failureless service of mentioned subsystems. PB - Trans Tech Publications Ltd, Durnten-Zurich C3 - Advances in Metallurgical and Mining Engineering T1 - Redesign of the Bucket Wheel Excavators Substructures Based on the Comparative Stress - Strain Analysis EP - + SP - 660 VL - 402 DO - 10.4028/www.scientific.net/AMR.402.660 ER -
@conference{ author = "Bošnjak, Srđan and Petković, Zoran D. and Zrnić, Nenad and Dunjić, Momčilo and Dragović, Branislav", year = "2012", abstract = "Failures caused by heavy duty conditions, as well as the changes of technological requirements, are basic reasons for the redesign of specific substructures of the bucket wheel excavators (BWE). The efficient redesign should be based on subtle external load identification and sufficient accuracy of stress - strain states determination. This paper gives solutions of reconstruction and comparative stress analyses for original and redesigned representative and vital BWE subsystems - slewing platform, undercarriage and two wheel bogie. The efficiency of these reconstructions is unquestionably confirmed by failureless service of mentioned subsystems.", publisher = "Trans Tech Publications Ltd, Durnten-Zurich", journal = "Advances in Metallurgical and Mining Engineering", title = "Redesign of the Bucket Wheel Excavators Substructures Based on the Comparative Stress - Strain Analysis", pages = "+-660", volume = "402", doi = "10.4028/www.scientific.net/AMR.402.660" }
Bošnjak, S., Petković, Z. D., Zrnić, N., Dunjić, M.,& Dragović, B.. (2012). Redesign of the Bucket Wheel Excavators Substructures Based on the Comparative Stress - Strain Analysis. in Advances in Metallurgical and Mining Engineering Trans Tech Publications Ltd, Durnten-Zurich., 402, 660-+. https://doi.org/10.4028/www.scientific.net/AMR.402.660
Bošnjak S, Petković ZD, Zrnić N, Dunjić M, Dragović B. Redesign of the Bucket Wheel Excavators Substructures Based on the Comparative Stress - Strain Analysis. in Advances in Metallurgical and Mining Engineering. 2012;402:660-+. doi:10.4028/www.scientific.net/AMR.402.660 .
Bošnjak, Srđan, Petković, Zoran D., Zrnić, Nenad, Dunjić, Momčilo, Dragović, Branislav, "Redesign of the Bucket Wheel Excavators Substructures Based on the Comparative Stress - Strain Analysis" in Advances in Metallurgical and Mining Engineering, 402 (2012):660-+, https://doi.org/10.4028/www.scientific.net/AMR.402.660 . .