HETRA experiment for investigation of heat removal from the first wall of helium-cooled-pebble-bed test blanket module
Само за регистроване кориснике
2011
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
This paper presents an experimental test section which has been developed at the Institute for Neutron Physics and Reactor Technique in Karlsruhe Institute of Technology for investigations of heat removal from the first wall (FW) of the Helium-Cooled-Pebble-Bed Test Blanket Module (HCPB TBM). The test section named HETRA is attached to HEBLO facility which can provide Helium parameters relevant for HCPB TBM conditions-pressure of 8 MPa and inlet temperature of 300 degrees C. The purpose of planned investigations is to verify numerically found decrease of heat transfer coefficient due to a pronounced asymmetry of heat loads at the first wall of HCPB TBM. This paper describes how HETRA test section has been built: from its design over fabrication to the assembling. The planned measurements are also explained by presentation of a detailed measuring scheme. Finally, the first results concerning experimental and computational determination of pressure losses in HETRA cooling channel are pre...sented.
Кључне речи:
Test blanket module / Pressure drop / Heat transfer / First wall / Experimental test sectionИзвор:
Fusion Engineering and Design, 2011, 86, 9-11, 2250-2253Издавач:
- Elsevier Science Sa, Lausanne
DOI: 10.1016/j.fusengdes.2010.12.080
ISSN: 0920-3796
WoS: 000297824000159
Scopus: 2-s2.0-80054032555
Институција/група
Inovacioni centarTY - JOUR AU - Ilić, Milica AU - Messemer, G. AU - Zinn, Kevin AU - Kiss, Bela PY - 2011 UR - https://machinery.mas.bg.ac.rs/handle/123456789/1240 AB - This paper presents an experimental test section which has been developed at the Institute for Neutron Physics and Reactor Technique in Karlsruhe Institute of Technology for investigations of heat removal from the first wall (FW) of the Helium-Cooled-Pebble-Bed Test Blanket Module (HCPB TBM). The test section named HETRA is attached to HEBLO facility which can provide Helium parameters relevant for HCPB TBM conditions-pressure of 8 MPa and inlet temperature of 300 degrees C. The purpose of planned investigations is to verify numerically found decrease of heat transfer coefficient due to a pronounced asymmetry of heat loads at the first wall of HCPB TBM. This paper describes how HETRA test section has been built: from its design over fabrication to the assembling. The planned measurements are also explained by presentation of a detailed measuring scheme. Finally, the first results concerning experimental and computational determination of pressure losses in HETRA cooling channel are presented. PB - Elsevier Science Sa, Lausanne T2 - Fusion Engineering and Design T1 - HETRA experiment for investigation of heat removal from the first wall of helium-cooled-pebble-bed test blanket module EP - 2253 IS - 9-11 SP - 2250 VL - 86 DO - 10.1016/j.fusengdes.2010.12.080 ER -
@article{ author = "Ilić, Milica and Messemer, G. and Zinn, Kevin and Kiss, Bela", year = "2011", abstract = "This paper presents an experimental test section which has been developed at the Institute for Neutron Physics and Reactor Technique in Karlsruhe Institute of Technology for investigations of heat removal from the first wall (FW) of the Helium-Cooled-Pebble-Bed Test Blanket Module (HCPB TBM). The test section named HETRA is attached to HEBLO facility which can provide Helium parameters relevant for HCPB TBM conditions-pressure of 8 MPa and inlet temperature of 300 degrees C. The purpose of planned investigations is to verify numerically found decrease of heat transfer coefficient due to a pronounced asymmetry of heat loads at the first wall of HCPB TBM. This paper describes how HETRA test section has been built: from its design over fabrication to the assembling. The planned measurements are also explained by presentation of a detailed measuring scheme. Finally, the first results concerning experimental and computational determination of pressure losses in HETRA cooling channel are presented.", publisher = "Elsevier Science Sa, Lausanne", journal = "Fusion Engineering and Design", title = "HETRA experiment for investigation of heat removal from the first wall of helium-cooled-pebble-bed test blanket module", pages = "2253-2250", number = "9-11", volume = "86", doi = "10.1016/j.fusengdes.2010.12.080" }
Ilić, M., Messemer, G., Zinn, K.,& Kiss, B.. (2011). HETRA experiment for investigation of heat removal from the first wall of helium-cooled-pebble-bed test blanket module. in Fusion Engineering and Design Elsevier Science Sa, Lausanne., 86(9-11), 2250-2253. https://doi.org/10.1016/j.fusengdes.2010.12.080
Ilić M, Messemer G, Zinn K, Kiss B. HETRA experiment for investigation of heat removal from the first wall of helium-cooled-pebble-bed test blanket module. in Fusion Engineering and Design. 2011;86(9-11):2250-2253. doi:10.1016/j.fusengdes.2010.12.080 .
Ilić, Milica, Messemer, G., Zinn, Kevin, Kiss, Bela, "HETRA experiment for investigation of heat removal from the first wall of helium-cooled-pebble-bed test blanket module" in Fusion Engineering and Design, 86, no. 9-11 (2011):2250-2253, https://doi.org/10.1016/j.fusengdes.2010.12.080 . .