Wear load capacity of crossed helical gears
Autori
Miltenović, AleksandarBanić, Milan
Tanasković, Jovan
Marinović Stefanović, Jelena
Rangelov, Damjan
Perić, Marko
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
The paper presents a wear load capacity of crossed helical gears (gear pair
consists of a worm and a helical gear). Crossed helical gears are similar to worm gear
pairs, and it is logical to extend the load capacity calculation approach of worm gears
for the case of crossed helical gears. One of the disadvantages of crossed helical gear
sets is very high running-in wear. The paper explains the transition between running-in
and steady-state wear and proposes a joint wear calculation model. The paper outlines
a proposal to extend the calculation method for wear load capacity from a worm gear
pair to the case of crossed helical gears (a worm with a helical gear). This calculation
method for determining the wear load capacity of crossed helical gears is verified for
the cases when the wheel is of bronze CuSn12Ni2-C-GCB and sintered steel
Fe1.5Cr0.2Mo.
Ključne reči:
Crossed Helical Gears / Wear / Bronze / Sintered Steel / Load CapacityIzvor:
FACTA UNIVERSITATIS Series: Mechanical Engineering, 2022Izdavač:
- University of Niš, Faculty of Mechanical Engineering
Finansiranje / projekti:
- Naučno-tehnološka podrška unapređenju bezbednosti specijalnih drumskih i šinskih vozila (RS-MESTD-Technological Development (TD or TR)-35045)
Kolekcije
Institucija/grupa
Mašinski fakultetTY - JOUR AU - Miltenović, Aleksandar AU - Banić, Milan AU - Tanasković, Jovan AU - Marinović Stefanović, Jelena AU - Rangelov, Damjan AU - Perić, Marko PY - 2022 UR - https://machinery.mas.bg.ac.rs/handle/123456789/5711 AB - The paper presents a wear load capacity of crossed helical gears (gear pair consists of a worm and a helical gear). Crossed helical gears are similar to worm gear pairs, and it is logical to extend the load capacity calculation approach of worm gears for the case of crossed helical gears. One of the disadvantages of crossed helical gear sets is very high running-in wear. The paper explains the transition between running-in and steady-state wear and proposes a joint wear calculation model. The paper outlines a proposal to extend the calculation method for wear load capacity from a worm gear pair to the case of crossed helical gears (a worm with a helical gear). This calculation method for determining the wear load capacity of crossed helical gears is verified for the cases when the wheel is of bronze CuSn12Ni2-C-GCB and sintered steel Fe1.5Cr0.2Mo. PB - University of Niš, Faculty of Mechanical Engineering T2 - FACTA UNIVERSITATIS Series: Mechanical Engineering T1 - Wear load capacity of crossed helical gears DO - 10.22190/FUME220114015M ER -
@article{ author = "Miltenović, Aleksandar and Banić, Milan and Tanasković, Jovan and Marinović Stefanović, Jelena and Rangelov, Damjan and Perić, Marko", year = "2022", abstract = "The paper presents a wear load capacity of crossed helical gears (gear pair consists of a worm and a helical gear). Crossed helical gears are similar to worm gear pairs, and it is logical to extend the load capacity calculation approach of worm gears for the case of crossed helical gears. One of the disadvantages of crossed helical gear sets is very high running-in wear. The paper explains the transition between running-in and steady-state wear and proposes a joint wear calculation model. The paper outlines a proposal to extend the calculation method for wear load capacity from a worm gear pair to the case of crossed helical gears (a worm with a helical gear). This calculation method for determining the wear load capacity of crossed helical gears is verified for the cases when the wheel is of bronze CuSn12Ni2-C-GCB and sintered steel Fe1.5Cr0.2Mo.", publisher = "University of Niš, Faculty of Mechanical Engineering", journal = "FACTA UNIVERSITATIS Series: Mechanical Engineering", title = "Wear load capacity of crossed helical gears", doi = "10.22190/FUME220114015M" }
Miltenović, A., Banić, M., Tanasković, J., Marinović Stefanović, J., Rangelov, D.,& Perić, M.. (2022). Wear load capacity of crossed helical gears. in FACTA UNIVERSITATIS Series: Mechanical Engineering University of Niš, Faculty of Mechanical Engineering.. https://doi.org/10.22190/FUME220114015M
Miltenović A, Banić M, Tanasković J, Marinović Stefanović J, Rangelov D, Perić M. Wear load capacity of crossed helical gears. in FACTA UNIVERSITATIS Series: Mechanical Engineering. 2022;. doi:10.22190/FUME220114015M .
Miltenović, Aleksandar, Banić, Milan, Tanasković, Jovan, Marinović Stefanović, Jelena, Rangelov, Damjan, Perić, Marko, "Wear load capacity of crossed helical gears" in FACTA UNIVERSITATIS Series: Mechanical Engineering (2022), https://doi.org/10.22190/FUME220114015M . .