Development of cam system for rough machining in free form surface manufacturing
2020
Аутори
Mladenović, GoranTanović, Ljubodrag
Puzović, Radovan
Milovanović, Marko
Popović, Mihajlo
Pjević, Miloš
Simonović, Vojislav
Конференцијски прилог (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Many areas of engineering today make use of parts obtained via free form surface machining. Production of these parts usually involves milling with ball end mill cutter. Often however it is not possible to perform the machining in one pass only and therefore it becomes necessary to perform rough machining first. This paper describes the developed procedure and the system for automatic tool path generation for rough milling.
Кључне речи:
CAM System / Free Form Surfaces / Manufacturing / Rough MachiningИзвор:
Proceedings of 5th International Scientific Conference - COMETa2020, 2020, 84-90Издавач:
- University of East Sarajevo, Faculty of Mechanical Engineering East Sarajevo
Финансирање / пројекти:
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200105 (Универзитет у Београду, Машински факултет) (RS-MESTD-inst-2020-200105)
Колекције
Институција/група
Mašinski fakultetTY - CONF AU - Mladenović, Goran AU - Tanović, Ljubodrag AU - Puzović, Radovan AU - Milovanović, Marko AU - Popović, Mihajlo AU - Pjević, Miloš AU - Simonović, Vojislav PY - 2020 UR - https://machinery.mas.bg.ac.rs/handle/123456789/5295 AB - Many areas of engineering today make use of parts obtained via free form surface machining. Production of these parts usually involves milling with ball end mill cutter. Often however it is not possible to perform the machining in one pass only and therefore it becomes necessary to perform rough machining first. This paper describes the developed procedure and the system for automatic tool path generation for rough milling. PB - University of East Sarajevo, Faculty of Mechanical Engineering East Sarajevo C3 - Proceedings of 5th International Scientific Conference - COMETa2020 T1 - Development of cam system for rough machining in free form surface manufacturing EP - 90 SP - 84 UR - https://hdl.handle.net/21.15107/rcub_machinery_5295 ER -
@conference{ author = "Mladenović, Goran and Tanović, Ljubodrag and Puzović, Radovan and Milovanović, Marko and Popović, Mihajlo and Pjević, Miloš and Simonović, Vojislav", year = "2020", abstract = "Many areas of engineering today make use of parts obtained via free form surface machining. Production of these parts usually involves milling with ball end mill cutter. Often however it is not possible to perform the machining in one pass only and therefore it becomes necessary to perform rough machining first. This paper describes the developed procedure and the system for automatic tool path generation for rough milling.", publisher = "University of East Sarajevo, Faculty of Mechanical Engineering East Sarajevo", journal = "Proceedings of 5th International Scientific Conference - COMETa2020", title = "Development of cam system for rough machining in free form surface manufacturing", pages = "90-84", url = "https://hdl.handle.net/21.15107/rcub_machinery_5295" }
Mladenović, G., Tanović, L., Puzović, R., Milovanović, M., Popović, M., Pjević, M.,& Simonović, V.. (2020). Development of cam system for rough machining in free form surface manufacturing. in Proceedings of 5th International Scientific Conference - COMETa2020 University of East Sarajevo, Faculty of Mechanical Engineering East Sarajevo., 84-90. https://hdl.handle.net/21.15107/rcub_machinery_5295
Mladenović G, Tanović L, Puzović R, Milovanović M, Popović M, Pjević M, Simonović V. Development of cam system for rough machining in free form surface manufacturing. in Proceedings of 5th International Scientific Conference - COMETa2020. 2020;:84-90. https://hdl.handle.net/21.15107/rcub_machinery_5295 .
Mladenović, Goran, Tanović, Ljubodrag, Puzović, Radovan, Milovanović, Marko, Popović, Mihajlo, Pjević, Miloš, Simonović, Vojislav, "Development of cam system for rough machining in free form surface manufacturing" in Proceedings of 5th International Scientific Conference - COMETa2020 (2020):84-90, https://hdl.handle.net/21.15107/rcub_machinery_5295 .