TY  - JOUR
AU  - Džindo, Emina
AU  - Sedmak, Simon
AU  - Grbović, Aleksandar
AU  - Milovanović, Nikola
AU  - Đorđević, Branislav
PY  - 2019
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/3105
AB  - The numerical analysis of the behaviour of a pressure vessel with a reinforcement ring subjected to both static and dynamic load is presented in this paper. This research was based on a previous analysis which involved different reinforcement ring dimensions, and their influence on the stress distribution within the pressure vessel, assuming the presence of a crack (Sedmak et al., in: International Conference on Structural Integrity and Durability, 2017). The aim was to compare the numerical results for two models, one of which was a 2D model simulated with classic FEM, whereas the other included a 3D fatigue crack, and was simulated with extended finite element method, using Morfeo software. The numerical simulation was based on a pressure vessel which is typically used as a part of hydropower plants, containing a manhole which is supported by the reinforcement ring. The analysis focused on a crack that was located in the welded joint between the reinforcement ring and the pressure vessel mantle. The results obtained by the simulations have shown the differences in the stress magnitudes and in the consequences resulting from the crack growth in both cases, depending on the type of the load, wherein the second (fatigue) load case was noticeably more extreme.
PB  - Springer, New York
T2  - Archive of Applied Mechanics
T1  - XFEM simulation of fatigue crack growth in a welded joint of a pressure vessel with a reinforcement ring
EP  - 926
IS  - 5
SP  - 919
VL  - 89
DO  - 10.1007/s00419-018-1435-1
ER  - 

@article{
author = "Džindo, Emina and Sedmak, Simon and Grbović, Aleksandar and Milovanović, Nikola and Đorđević, Branislav",
year = "2019",
abstract = "The numerical analysis of the behaviour of a pressure vessel with a reinforcement ring subjected to both static and dynamic load is presented in this paper. This research was based on a previous analysis which involved different reinforcement ring dimensions, and their influence on the stress distribution within the pressure vessel, assuming the presence of a crack (Sedmak et al., in: International Conference on Structural Integrity and Durability, 2017). The aim was to compare the numerical results for two models, one of which was a 2D model simulated with classic FEM, whereas the other included a 3D fatigue crack, and was simulated with extended finite element method, using Morfeo software. The numerical simulation was based on a pressure vessel which is typically used as a part of hydropower plants, containing a manhole which is supported by the reinforcement ring. The analysis focused on a crack that was located in the welded joint between the reinforcement ring and the pressure vessel mantle. The results obtained by the simulations have shown the differences in the stress magnitudes and in the consequences resulting from the crack growth in both cases, depending on the type of the load, wherein the second (fatigue) load case was noticeably more extreme.",
publisher = "Springer, New York",
journal = "Archive of Applied Mechanics",
title = "XFEM simulation of fatigue crack growth in a welded joint of a pressure vessel with a reinforcement ring",
pages = "926-919",
number = "5",
volume = "89",
doi = "10.1007/s00419-018-1435-1"
}

Džindo, E., Sedmak, S., Grbović, A., Milovanović, N.,& Đorđević, B.. (2019). XFEM simulation of fatigue crack growth in a welded joint of a pressure vessel with a reinforcement ring. in Archive of Applied Mechanics
Springer, New York., 89(5), 919-926.
https://doi.org/10.1007/s00419-018-1435-1

Džindo E, Sedmak S, Grbović A, Milovanović N, Đorđević B. XFEM simulation of fatigue crack growth in a welded joint of a pressure vessel with a reinforcement ring. in Archive of Applied Mechanics. 2019;89(5):919-926.
doi:10.1007/s00419-018-1435-1 .

Džindo, Emina, Sedmak, Simon, Grbović, Aleksandar, Milovanović, Nikola, Đorđević, Branislav, "XFEM simulation of fatigue crack growth in a welded joint of a pressure vessel with a reinforcement ring" in Archive of Applied Mechanics, 89, no. 5 (2019):919-926,
https://doi.org/10.1007/s00419-018-1435-1 . .

TY  - CONF
AU  - Džindo, Emina
AU  - Sedmak, Simon
AU  - Camagić, Ivica
AU  - Burzić, Zijah
AU  - Perković, Srđa
AU  - Cvetković, Ivana
PY  - 2019
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/3071
AB  - This paper is focused on the experimental measuring of impact energy as a part of the doctoral dissertation involving the fatigue behaviour of welded joints, made of fine grain normalised micro-alloyed low carbon high strength steel P460NL1 [1,2], typically used for pressure vessels working at subzero temperatures. VAC 65 [3] was used as filler material, and two plates were welded using the MAG welding procedure (with 82% Ar + 18% CO2 shielding gas). The specimens were taken from two opposite ends of the welded plate, taking into account the measured values of groove edge temperature in these locations, wherein the temperatures in Location 2 (near the end of the weld) were higher than those in Location 1 (near the weld's beginning). Based on their specific position, in terms of temperature and notch position (weld root or face), the specimens were divided into four groups of three. This testing was performed using a SCHENCK-TREBEL instrumented Charpy pendulum. The total impact energy was determined, along with its components, crack initiation and crack propagation energy. The obtained results have confirmed that the test specimens were of high toughness, with total impact energy ranging from 165200 J, at room temperature. The crack propagation energy was the dominant component, being several times greater than the crack initiation energy, as was expected.
PB  - Elsevier Science Bv, Amsterdam
C3  - Procedia Structural Integrity - 25th International Conference on Fracture and Structural Integrity
T1  - Experimental determining of fracture behaviour of P460NL1 steel welded joint specimens
EP  - 236
SP  - 231
VL  - 18
DO  - 10.1016/j.prostr.2019.08.158
ER  - 

@conference{
author = "Džindo, Emina and Sedmak, Simon and Camagić, Ivica and Burzić, Zijah and Perković, Srđa and Cvetković, Ivana",
year = "2019",
abstract = "This paper is focused on the experimental measuring of impact energy as a part of the doctoral dissertation involving the fatigue behaviour of welded joints, made of fine grain normalised micro-alloyed low carbon high strength steel P460NL1 [1,2], typically used for pressure vessels working at subzero temperatures. VAC 65 [3] was used as filler material, and two plates were welded using the MAG welding procedure (with 82% Ar + 18% CO2 shielding gas). The specimens were taken from two opposite ends of the welded plate, taking into account the measured values of groove edge temperature in these locations, wherein the temperatures in Location 2 (near the end of the weld) were higher than those in Location 1 (near the weld's beginning). Based on their specific position, in terms of temperature and notch position (weld root or face), the specimens were divided into four groups of three. This testing was performed using a SCHENCK-TREBEL instrumented Charpy pendulum. The total impact energy was determined, along with its components, crack initiation and crack propagation energy. The obtained results have confirmed that the test specimens were of high toughness, with total impact energy ranging from 165200 J, at room temperature. The crack propagation energy was the dominant component, being several times greater than the crack initiation energy, as was expected.",
publisher = "Elsevier Science Bv, Amsterdam",
journal = "Procedia Structural Integrity - 25th International Conference on Fracture and Structural Integrity",
title = "Experimental determining of fracture behaviour of P460NL1 steel welded joint specimens",
pages = "236-231",
volume = "18",
doi = "10.1016/j.prostr.2019.08.158"
}

Džindo, E., Sedmak, S., Camagić, I., Burzić, Z., Perković, S.,& Cvetković, I.. (2019). Experimental determining of fracture behaviour of P460NL1 steel welded joint specimens. in Procedia Structural Integrity - 25th International Conference on Fracture and Structural Integrity
Elsevier Science Bv, Amsterdam., 18, 231-236.
https://doi.org/10.1016/j.prostr.2019.08.158

Džindo E, Sedmak S, Camagić I, Burzić Z, Perković S, Cvetković I. Experimental determining of fracture behaviour of P460NL1 steel welded joint specimens. in Procedia Structural Integrity - 25th International Conference on Fracture and Structural Integrity. 2019;18:231-236.
doi:10.1016/j.prostr.2019.08.158 .

Džindo, Emina, Sedmak, Simon, Camagić, Ivica, Burzić, Zijah, Perković, Srđa, Cvetković, Ivana, "Experimental determining of fracture behaviour of P460NL1 steel welded joint specimens" in Procedia Structural Integrity - 25th International Conference on Fracture and Structural Integrity, 18 (2019):231-236,
https://doi.org/10.1016/j.prostr.2019.08.158 . .

TY  - THES
AU  - Džindo, Emina
PY  - 2018
UR  - http://eteze.bg.ac.rs/application/showtheses?thesesId=6365
UR  - https://nardus.mpn.gov.rs/handle/123456789/10348
UR  - https://fedorabg.bg.ac.rs/fedora/get/o:19042/bdef:Content/download
UR  - http://vbs.rs/scripts/cobiss?command=DISPLAY&base=70036&RID=514975907
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/61
AB  - Eksperimentalno analiziranje rasta prsline u pojedinim konstituentima zavarennh spojeva kompleksno legirannh čelika visoke čvrstoće na epruvetama i u realnim konstrukcijama, kao i uticaj rasta prsline na sigurnost zavarenog spoja upravo je cilj ovog rada. Da bi se omoguhilo zavarivanje takvih konstrukcijskih čelika, dodatni materijal za zavarivanje se projektuje tako da metal šava nakon zavarivanja ima nešto manju čvrstoću od osnovnog metala (andermečing efekt). U tako zavarenom spoju do plastičnog tečenja će doći prvo u metalu šava. Tek nakon ojačavanja MŠ do nivoa granice tečenja OM dolazi do ppastičnog deformisanja OM. Cilj ovog rada je da se pokažu numerički modeli, doprinos analizi problema iz referentne oblasti koji se sastoji upravo u mogućnosti da se na brz i relativno jednostavan način razvoja modela koji će na merodavan način predstaviti realno ponašanje epruveta,, u pogledu koncentracije napona i polja deformacijatokom relevantnih opterećenja. Numeričkom analizom moguće je prikazati i širenje prsline, odnosno promena njene dužine u odnosu na inicijalnu vrednost od 2.3 mm. Ovi rezultati se takođe mogu iskoristiti i kao osnova za buduća istraživanja, koja bi mogla da se bave ispitivanjem ponašanja ovakvih epruveta na zamorno opterećenje, s obzirom da su posude pod pritiskom (oblast primene ovakvih materijala) upravo izložene ovakvom opterećenju i najčešće otkazuju usled istog. Dakle, prvo su primenjene metoda konačnih elemenata kao numerička metoda, kao i dve eksperimentalne metode metoda mernih traka i metoda za digitalnu korelaciju slika. Detaljno je sakupljena, proučena i sistematizovana naučna literatura iz oblasti vezana za sve aspekte ove disertacije. Analizirana je razlika u ponašanju zavarenog spoja kao celine i njegovih konstituenata i zatezanjem su ispitane epruvete sa metalom šava manje i veće čvrstoće u odnosu na osnovni metal što je važno i za ocenu otpornosti prema širenju prsline, daje osnovne podatke o ponašanju materijala pri opterećivanju...
AB  - The main goal in this research is the experimental crack growth analysis for certain welded joint constituents of complex high strength alloyed steels, concerning both the specimens and real structures, as well as the influence of crack growth on the safety of the welded joint. In order to perform the welding of such structural steels, the welding filler material is designed to obtain a somewhat lower value of the weld metal strength than the strength of the parent metal (PM) (undermatching effect). The onset of plastic flow in this type of welded joint occurs initially in the weld metal (WM). Thus, plastic deformation in the PM does not occur until the deformation hardening of the WM reaches the plasticity limit of the PM. First, the finite element method is applied as a numerical tool, followed by two experimental methods: the strain gauge method, and the digital image correlation method. Literature connected to all the disciplines concerning this research has been collected, studied and systematized in detail. The difference in the welded joint behaviour as a whole and its constituents has been analysed through tension testing of specimens produced with both overmatched and undermatched weld metal, which is important for assessing the crack growth resistance, since it brings major results on the material behaviour of the loaded structure. In the effort to prove this assumption, at first - based on experimental results the numerical simulation is performed by applying ABAQUS software on three-point bending specimen behaviour. The application of the finite element method has proved an acceptable weldability of the undermatched steel weld and the resistance to crack growth and brittle fracture. The possibilities for a fast and relatively simple model development are shown, representing competent realistic specimen behaviour, both concerning stress concentrations and deformation fields in external loading experimental conditions. These models clearly depict the crack propagation. The procedure for experimental analysis is defined, and based on the results obtained, the stresses and plastic deformations have been confirmed to reach the highest levels at locations of acting loads and crack tips, as has been expected...
PB  - Univerzitet u Beogradu, Mašinski fakultet
T1  - Razvoj prsline zavarenih heterogenih spojeva
T1  - Model analysis of complex spatial structres' strength
UR  - https://hdl.handle.net/21.15107/rcub_nardus_10348
ER  - 

@phdthesis{
author = "Džindo, Emina",
year = "2018",
abstract = "Eksperimentalno analiziranje rasta prsline u pojedinim konstituentima zavarennh spojeva kompleksno legirannh čelika visoke čvrstoće na epruvetama i u realnim konstrukcijama, kao i uticaj rasta prsline na sigurnost zavarenog spoja upravo je cilj ovog rada. Da bi se omoguhilo zavarivanje takvih konstrukcijskih čelika, dodatni materijal za zavarivanje se projektuje tako da metal šava nakon zavarivanja ima nešto manju čvrstoću od osnovnog metala (andermečing efekt). U tako zavarenom spoju do plastičnog tečenja će doći prvo u metalu šava. Tek nakon ojačavanja MŠ do nivoa granice tečenja OM dolazi do ppastičnog deformisanja OM. Cilj ovog rada je da se pokažu numerički modeli, doprinos analizi problema iz referentne oblasti koji se sastoji upravo u mogućnosti da se na brz i relativno jednostavan način razvoja modela koji će na merodavan način predstaviti realno ponašanje epruveta,, u pogledu koncentracije napona i polja deformacijatokom relevantnih opterećenja. Numeričkom analizom moguće je prikazati i širenje prsline, odnosno promena njene dužine u odnosu na inicijalnu vrednost od 2.3 mm. Ovi rezultati se takođe mogu iskoristiti i kao osnova za buduća istraživanja, koja bi mogla da se bave ispitivanjem ponašanja ovakvih epruveta na zamorno opterećenje, s obzirom da su posude pod pritiskom (oblast primene ovakvih materijala) upravo izložene ovakvom opterećenju i najčešće otkazuju usled istog. Dakle, prvo su primenjene metoda konačnih elemenata kao numerička metoda, kao i dve eksperimentalne metode metoda mernih traka i metoda za digitalnu korelaciju slika. Detaljno je sakupljena, proučena i sistematizovana naučna literatura iz oblasti vezana za sve aspekte ove disertacije. Analizirana je razlika u ponašanju zavarenog spoja kao celine i njegovih konstituenata i zatezanjem su ispitane epruvete sa metalom šava manje i veće čvrstoće u odnosu na osnovni metal što je važno i za ocenu otpornosti prema širenju prsline, daje osnovne podatke o ponašanju materijala pri opterećivanju..., The main goal in this research is the experimental crack growth analysis for certain welded joint constituents of complex high strength alloyed steels, concerning both the specimens and real structures, as well as the influence of crack growth on the safety of the welded joint. In order to perform the welding of such structural steels, the welding filler material is designed to obtain a somewhat lower value of the weld metal strength than the strength of the parent metal (PM) (undermatching effect). The onset of plastic flow in this type of welded joint occurs initially in the weld metal (WM). Thus, plastic deformation in the PM does not occur until the deformation hardening of the WM reaches the plasticity limit of the PM. First, the finite element method is applied as a numerical tool, followed by two experimental methods: the strain gauge method, and the digital image correlation method. Literature connected to all the disciplines concerning this research has been collected, studied and systematized in detail. The difference in the welded joint behaviour as a whole and its constituents has been analysed through tension testing of specimens produced with both overmatched and undermatched weld metal, which is important for assessing the crack growth resistance, since it brings major results on the material behaviour of the loaded structure. In the effort to prove this assumption, at first - based on experimental results the numerical simulation is performed by applying ABAQUS software on three-point bending specimen behaviour. The application of the finite element method has proved an acceptable weldability of the undermatched steel weld and the resistance to crack growth and brittle fracture. The possibilities for a fast and relatively simple model development are shown, representing competent realistic specimen behaviour, both concerning stress concentrations and deformation fields in external loading experimental conditions. These models clearly depict the crack propagation. The procedure for experimental analysis is defined, and based on the results obtained, the stresses and plastic deformations have been confirmed to reach the highest levels at locations of acting loads and crack tips, as has been expected...",
publisher = "Univerzitet u Beogradu, Mašinski fakultet",
title = "Razvoj prsline zavarenih heterogenih spojeva, Model analysis of complex spatial structres' strength",
url = "https://hdl.handle.net/21.15107/rcub_nardus_10348"
}

Džindo, E.. (2018). Razvoj prsline zavarenih heterogenih spojeva. 
Univerzitet u Beogradu, Mašinski fakultet..
https://hdl.handle.net/21.15107/rcub_nardus_10348

Džindo E. Razvoj prsline zavarenih heterogenih spojeva. 2018;.
https://hdl.handle.net/21.15107/rcub_nardus_10348 .

Džindo, Emina, "Razvoj prsline zavarenih heterogenih spojeva" (2018),
https://hdl.handle.net/21.15107/rcub_nardus_10348 .

TY  - CONF
AU  - Sedmak, Simon
AU  - Milovanović, Nikola
AU  - Džindo, Emina
AU  - Đorđević, Branislav
AU  - Tatić, Uroš
PY  - 2018
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6412
AB  - The analysis of the influence of a reinforcement ring on the stress and strain state within a pressure vessel by using numerical methods is presented in this paper. The aim was to compare the numerical results for different reinforcement ring geometries (in terms of width), while assuming that a crack is present in the welded joint connecting the ring to the pressure vessel outer wall. The numerical simulation was based on a pressure vessel which is typically used as a part of hydro power plants, containing a manhole which is supported by the reinforcement ring. The results obtained by the simulation can be used as a base for further, more complex cases, such as a 3-dimensional analysis of the same problem.
C3  - International conference on structural integrity and durability 2017,  ICSID 2017, Book of abstracts
T1  - Numerical simulation of the influence of reinforcement ring on the stress and strain distibution in pressure vessels
EP  - 168
SP  - 167
UR  - https://hdl.handle.net/21.15107/rcub_machinery_6412
ER  - 

@conference{
author = "Sedmak, Simon and Milovanović, Nikola and Džindo, Emina and Đorđević, Branislav and Tatić, Uroš",
year = "2018",
abstract = "The analysis of the influence of a reinforcement ring on the stress and strain state within a pressure vessel by using numerical methods is presented in this paper. The aim was to compare the numerical results for different reinforcement ring geometries (in terms of width), while assuming that a crack is present in the welded joint connecting the ring to the pressure vessel outer wall. The numerical simulation was based on a pressure vessel which is typically used as a part of hydro power plants, containing a manhole which is supported by the reinforcement ring. The results obtained by the simulation can be used as a base for further, more complex cases, such as a 3-dimensional analysis of the same problem.",
journal = "International conference on structural integrity and durability 2017,  ICSID 2017, Book of abstracts",
title = "Numerical simulation of the influence of reinforcement ring on the stress and strain distibution in pressure vessels",
pages = "168-167",
url = "https://hdl.handle.net/21.15107/rcub_machinery_6412"
}

Sedmak, S., Milovanović, N., Džindo, E., Đorđević, B.,& Tatić, U.. (2018). Numerical simulation of the influence of reinforcement ring on the stress and strain distibution in pressure vessels. in International conference on structural integrity and durability 2017,  ICSID 2017, Book of abstracts, 167-168.
https://hdl.handle.net/21.15107/rcub_machinery_6412

Sedmak S, Milovanović N, Džindo E, Đorđević B, Tatić U. Numerical simulation of the influence of reinforcement ring on the stress and strain distibution in pressure vessels. in International conference on structural integrity and durability 2017,  ICSID 2017, Book of abstracts. 2018;:167-168.
https://hdl.handle.net/21.15107/rcub_machinery_6412 .

Sedmak, Simon, Milovanović, Nikola, Džindo, Emina, Đorđević, Branislav, Tatić, Uroš, "Numerical simulation of the influence of reinforcement ring on the stress and strain distibution in pressure vessels" in International conference on structural integrity and durability 2017,  ICSID 2017, Book of abstracts (2018):167-168,
https://hdl.handle.net/21.15107/rcub_machinery_6412 .

TY  - CONF
AU  - Sedmak, Simon
AU  - Džindo, Emina
AU  - Radaković, Zoran
AU  - Petrovski, Blagoj
AU  - Aranđelović, Mihajlo
PY  - 2018
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4880
PB  - Serbian Welding Society – DUZS, Serbia
C3  - 4th IIW South-East European Welding Congress, Topic: Safe Welded Construction by High Quality Welding
T1  - FEM modeling of crack propagation in welded joints with different crack locations
UR  - https://hdl.handle.net/21.15107/rcub_machinery_4880
ER  - 

@conference{
author = "Sedmak, Simon and Džindo, Emina and Radaković, Zoran and Petrovski, Blagoj and Aranđelović, Mihajlo",
year = "2018",
publisher = "Serbian Welding Society – DUZS, Serbia",
journal = "4th IIW South-East European Welding Congress, Topic: Safe Welded Construction by High Quality Welding",
title = "FEM modeling of crack propagation in welded joints with different crack locations",
url = "https://hdl.handle.net/21.15107/rcub_machinery_4880"
}

Sedmak, S., Džindo, E., Radaković, Z., Petrovski, B.,& Aranđelović, M.. (2018). FEM modeling of crack propagation in welded joints with different crack locations. in 4th IIW South-East European Welding Congress, Topic: Safe Welded Construction by High Quality Welding
Serbian Welding Society – DUZS, Serbia..
https://hdl.handle.net/21.15107/rcub_machinery_4880

Sedmak S, Džindo E, Radaković Z, Petrovski B, Aranđelović M. FEM modeling of crack propagation in welded joints with different crack locations. in 4th IIW South-East European Welding Congress, Topic: Safe Welded Construction by High Quality Welding. 2018;.
https://hdl.handle.net/21.15107/rcub_machinery_4880 .

Sedmak, Simon, Džindo, Emina, Radaković, Zoran, Petrovski, Blagoj, Aranđelović, Mihajlo, "FEM modeling of crack propagation in welded joints with different crack locations" in 4th IIW South-East European Welding Congress, Topic: Safe Welded Construction by High Quality Welding (2018),
https://hdl.handle.net/21.15107/rcub_machinery_4880 .

TY  - JOUR
AU  - Džindo, Emina
AU  - Radaković, Zoran
AU  - Petrovski, Blagoj
AU  - Tadić, Srđan
AU  - Petronić, Sanja
AU  - Sedmak, Simon
AU  - Đorđević, Branislav
PY  - 2018
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4877
AB  - The steels fracture toughness was measured at two different temperature T= - 60°C and T = -90°C, at v=0.02 mm/min and v=0.5 mm/min. The following steels: CrMoV, 20MnMoNi55, A533B and A508 were tested with three different sizes of CT specimens 50 and 100 and 200. Those steels are weldable, although the authors investigated the fracture behaviour of base material. In order to satisfy statistical analyses, a large number of specimens were tested. Fracture behaviour has turned out to be typical, S-shaped curve for transitional fracture at low temperatures. Apart from the other variables, specimen’s width significantly affects measured toughness. Smaller specimens, CT50, might be considered of upper bound reliability while the CT200 specimens were shown to be the most conservative. In this way it has been shown that wider specimens are more reliable in a fracture assessment of the examined steels. In this paper, the fracture probabilities of specimens in function of fracture toughness were determined as well, and it could be concluded that the widest specimens are the most likely to be broken for the same values of the fracture toughness.
PB  - Trans Tech Publications Ltd.
T2  - Advanced Materials Research
T1  - Fracture toughness in the transition temperature region
EP  - 97
SP  - 92
VL  - 1146
DO  - 10.4028/www.scientific.net/AMR.1146.92
ER  - 

@article{
author = "Džindo, Emina and Radaković, Zoran and Petrovski, Blagoj and Tadić, Srđan and Petronić, Sanja and Sedmak, Simon and Đorđević, Branislav",
year = "2018",
abstract = "The steels fracture toughness was measured at two different temperature T= - 60°C and T = -90°C, at v=0.02 mm/min and v=0.5 mm/min. The following steels: CrMoV, 20MnMoNi55, A533B and A508 were tested with three different sizes of CT specimens 50 and 100 and 200. Those steels are weldable, although the authors investigated the fracture behaviour of base material. In order to satisfy statistical analyses, a large number of specimens were tested. Fracture behaviour has turned out to be typical, S-shaped curve for transitional fracture at low temperatures. Apart from the other variables, specimen’s width significantly affects measured toughness. Smaller specimens, CT50, might be considered of upper bound reliability while the CT200 specimens were shown to be the most conservative. In this way it has been shown that wider specimens are more reliable in a fracture assessment of the examined steels. In this paper, the fracture probabilities of specimens in function of fracture toughness were determined as well, and it could be concluded that the widest specimens are the most likely to be broken for the same values of the fracture toughness.",
publisher = "Trans Tech Publications Ltd.",
journal = "Advanced Materials Research",
title = "Fracture toughness in the transition temperature region",
pages = "97-92",
volume = "1146",
doi = "10.4028/www.scientific.net/AMR.1146.92"
}

Džindo, E., Radaković, Z., Petrovski, B., Tadić, S., Petronić, S., Sedmak, S.,& Đorđević, B.. (2018). Fracture toughness in the transition temperature region. in Advanced Materials Research
Trans Tech Publications Ltd.., 1146, 92-97.
https://doi.org/10.4028/www.scientific.net/AMR.1146.92

Džindo E, Radaković Z, Petrovski B, Tadić S, Petronić S, Sedmak S, Đorđević B. Fracture toughness in the transition temperature region. in Advanced Materials Research. 2018;1146:92-97.
doi:10.4028/www.scientific.net/AMR.1146.92 .

Džindo, Emina, Radaković, Zoran, Petrovski, Blagoj, Tadić, Srđan, Petronić, Sanja, Sedmak, Simon, Đorđević, Branislav, "Fracture toughness in the transition temperature region" in Advanced Materials Research, 1146 (2018):92-97,
https://doi.org/10.4028/www.scientific.net/AMR.1146.92 . .

TY  - CONF
AU  - Džindo, Emina
AU  - Sedmak, Simon
AU  - Radaković, Zoran
AU  - Cvetković, Ivana
PY  - 2018
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/2813
AB  - The ovennatching can affect the occurrence of cold cracks after welding in high-strength low-alloyed steels of 770 MPa yield strength class. The welding consumable has been designed in a way to produce WM with slightly lower strength properties compared to BM (undennatching effect). The application of high-strength low-alloyed steel SUMIITEN 80P, required a large scope of testing for estimation of behavior of welded joints under different loading conditions, in order to give the reliable estimation of penstock safety.
PB  - Elsevier Science Bv, Amsterdam
C3  - Procedia Structural Integrity - ECF22 - Loading and environmental effects on structural integrity
T1  - Crack growth resistance of weldment constituents
EP  - 423
SP  - 420
VL  - 13
DO  - 10.1016/j.prostr.2018.12.070
ER  - 

@conference{
author = "Džindo, Emina and Sedmak, Simon and Radaković, Zoran and Cvetković, Ivana",
year = "2018",
abstract = "The ovennatching can affect the occurrence of cold cracks after welding in high-strength low-alloyed steels of 770 MPa yield strength class. The welding consumable has been designed in a way to produce WM with slightly lower strength properties compared to BM (undennatching effect). The application of high-strength low-alloyed steel SUMIITEN 80P, required a large scope of testing for estimation of behavior of welded joints under different loading conditions, in order to give the reliable estimation of penstock safety.",
publisher = "Elsevier Science Bv, Amsterdam",
journal = "Procedia Structural Integrity - ECF22 - Loading and environmental effects on structural integrity",
title = "Crack growth resistance of weldment constituents",
pages = "423-420",
volume = "13",
doi = "10.1016/j.prostr.2018.12.070"
}

Džindo, E., Sedmak, S., Radaković, Z.,& Cvetković, I.. (2018). Crack growth resistance of weldment constituents. in Procedia Structural Integrity - ECF22 - Loading and environmental effects on structural integrity
Elsevier Science Bv, Amsterdam., 13, 420-423.
https://doi.org/10.1016/j.prostr.2018.12.070

Džindo E, Sedmak S, Radaković Z, Cvetković I. Crack growth resistance of weldment constituents. in Procedia Structural Integrity - ECF22 - Loading and environmental effects on structural integrity. 2018;13:420-423.
doi:10.1016/j.prostr.2018.12.070 .

Džindo, Emina, Sedmak, Simon, Radaković, Zoran, Cvetković, Ivana, "Crack growth resistance of weldment constituents" in Procedia Structural Integrity - ECF22 - Loading and environmental effects on structural integrity, 13 (2018):420-423,
https://doi.org/10.1016/j.prostr.2018.12.070 . .

TY  - CONF
AU  - Džindo, Emina
AU  - Radaković, Zoran
PY  - 2018
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4867
AB  - JLB (cleavage lower bound toughness) assessment performed by testing of a single specimen represents a reliable method for evaluating of the lower limit based on one or more fracture toughness results, with considerable scatter. This method can be used to assess he lower limit in the transition area via single specimen testing for each required temperature. Method gives the best estimates for small specimens, which are characterized by significant result scatter and might be considered of upper bound reliability. In this paper, the fracture probabilities of specimens in function of fracture toughness were determined as well, and it could be concluded that the widest specimens are the most likely to be broken for the same values of the fracture toughness.
PB  - IDMEC Instituto de Engenharia Mecânica, Instituto Superior Técnico, University of Lisbon
C3  - 18th International Conference on New Trends in Fatigue and Fracture (NT2F18), L. Reis, M. Freitas, V. Anes (Eds.), Instituto Superior Técnico, Lisboa, Portugal, 2018
T1  - Fracture toughness in the transition temperature region for steels CrMoV and 20MnMoNi55 at t = –60°C
EP  - 336
SP  - 333
UR  - https://hdl.handle.net/21.15107/rcub_machinery_4867
ER  - 

@conference{
author = "Džindo, Emina and Radaković, Zoran",
year = "2018",
abstract = "JLB (cleavage lower bound toughness) assessment performed by testing of a single specimen represents a reliable method for evaluating of the lower limit based on one or more fracture toughness results, with considerable scatter. This method can be used to assess he lower limit in the transition area via single specimen testing for each required temperature. Method gives the best estimates for small specimens, which are characterized by significant result scatter and might be considered of upper bound reliability. In this paper, the fracture probabilities of specimens in function of fracture toughness were determined as well, and it could be concluded that the widest specimens are the most likely to be broken for the same values of the fracture toughness.",
publisher = "IDMEC Instituto de Engenharia Mecânica, Instituto Superior Técnico, University of Lisbon",
journal = "18th International Conference on New Trends in Fatigue and Fracture (NT2F18), L. Reis, M. Freitas, V. Anes (Eds.), Instituto Superior Técnico, Lisboa, Portugal, 2018",
title = "Fracture toughness in the transition temperature region for steels CrMoV and 20MnMoNi55 at t = –60°C",
pages = "336-333",
url = "https://hdl.handle.net/21.15107/rcub_machinery_4867"
}

Džindo, E.,& Radaković, Z.. (2018). Fracture toughness in the transition temperature region for steels CrMoV and 20MnMoNi55 at t = –60°C. in 18th International Conference on New Trends in Fatigue and Fracture (NT2F18), L. Reis, M. Freitas, V. Anes (Eds.), Instituto Superior Técnico, Lisboa, Portugal, 2018
IDMEC Instituto de Engenharia Mecânica, Instituto Superior Técnico, University of Lisbon., 333-336.
https://hdl.handle.net/21.15107/rcub_machinery_4867

Džindo E, Radaković Z. Fracture toughness in the transition temperature region for steels CrMoV and 20MnMoNi55 at t = –60°C. in 18th International Conference on New Trends in Fatigue and Fracture (NT2F18), L. Reis, M. Freitas, V. Anes (Eds.), Instituto Superior Técnico, Lisboa, Portugal, 2018. 2018;:333-336.
https://hdl.handle.net/21.15107/rcub_machinery_4867 .

Džindo, Emina, Radaković, Zoran, "Fracture toughness in the transition temperature region for steels CrMoV and 20MnMoNi55 at t = –60°C" in 18th International Conference on New Trends in Fatigue and Fracture (NT2F18), L. Reis, M. Freitas, V. Anes (Eds.), Instituto Superior Técnico, Lisboa, Portugal, 2018 (2018):333-336,
https://hdl.handle.net/21.15107/rcub_machinery_4867 .

TY  - CONF
AU  - Milovanović, Nikola
AU  - Đorđević, Branislav
AU  - Sedmak, Simon
AU  - Tatić, Uroš
AU  - Džindo, Emina
PY  - 2017
UR  - http://cnntechno.com/docs/CNN%20TECH%202017%20-%20Book%20of%20abstracts.pdf
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6242
AB  - The method for repairing (replacement) of a bottom panel of hot water boiler in Valjevo heating plant, with a power of 30 MW, manufactured by Remming is presented in this paper. Damage that occurred on the bottom panel were a consequence of conditions under which the boiler was working, which resulted in the thinning of pipe walls of the boiler bottom panel. Metal corrosion caused this thinning of pipe walls under the presence of sulfuric acid. The procedure used for repairing, i.e. the replacing of the bottom panel of the boiler is shown. Repair welding was performed using the MAG procedure, combined with gas welding. In addition, the requirements of the welding technology related to successful repairing of the equipment are also discussed.
C3  - International Conference of Experimental and Numerical Investigations and New Technologies“ CNN TECH 2017
T1  - Repairing Of Bottom Panel Of Boiler In Heating Plant
SP  - 12
UR  - https://hdl.handle.net/21.15107/rcub_machinery_6242
ER  - 

@conference{
author = "Milovanović, Nikola and Đorđević, Branislav and Sedmak, Simon and Tatić, Uroš and Džindo, Emina",
year = "2017",
abstract = "The method for repairing (replacement) of a bottom panel of hot water boiler in Valjevo heating plant, with a power of 30 MW, manufactured by Remming is presented in this paper. Damage that occurred on the bottom panel were a consequence of conditions under which the boiler was working, which resulted in the thinning of pipe walls of the boiler bottom panel. Metal corrosion caused this thinning of pipe walls under the presence of sulfuric acid. The procedure used for repairing, i.e. the replacing of the bottom panel of the boiler is shown. Repair welding was performed using the MAG procedure, combined with gas welding. In addition, the requirements of the welding technology related to successful repairing of the equipment are also discussed.",
journal = "International Conference of Experimental and Numerical Investigations and New Technologies“ CNN TECH 2017",
title = "Repairing Of Bottom Panel Of Boiler In Heating Plant",
pages = "12",
url = "https://hdl.handle.net/21.15107/rcub_machinery_6242"
}

Milovanović, N., Đorđević, B., Sedmak, S., Tatić, U.,& Džindo, E.. (2017). Repairing Of Bottom Panel Of Boiler In Heating Plant. in International Conference of Experimental and Numerical Investigations and New Technologies“ CNN TECH 2017, 12.
https://hdl.handle.net/21.15107/rcub_machinery_6242

Milovanović N, Đorđević B, Sedmak S, Tatić U, Džindo E. Repairing Of Bottom Panel Of Boiler In Heating Plant. in International Conference of Experimental and Numerical Investigations and New Technologies“ CNN TECH 2017. 2017;:12.
https://hdl.handle.net/21.15107/rcub_machinery_6242 .

Milovanović, Nikola, Đorđević, Branislav, Sedmak, Simon, Tatić, Uroš, Džindo, Emina, "Repairing Of Bottom Panel Of Boiler In Heating Plant" in International Conference of Experimental and Numerical Investigations and New Technologies“ CNN TECH 2017 (2017):12,
https://hdl.handle.net/21.15107/rcub_machinery_6242 .

TY  - CONF
AU  - Sedmak, Simon
AU  - Milović, Ljubica
AU  - Jovičić, Radomir
AU  - Đorđević, Branislav
AU  - Džindo, Emina
AU  - Zrilić, Milorad
AU  - Maneski, Taško
PY  - 2016
UR  - https://konferencia.unideb.hu/sites/default/files/upload_documents/iscame_proceedings4.pdf
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6148
AB  - The aim of this paper is to present the possibilities of application of digital image correlation (DIC)
method in measuring crack propagation in a welded joint specimen with a notch. For this purpose, specimens were taken from butt welded plates, made of P460NL1 micro-alloyed steel, which is typically used in manufacturing of pressure vessels, such as pipelines and storage tanks. Solid wire FILTUB 12M was used as additional material for the welded joints. Fatigue pre-cracking of threepoint bending specimens was done on the hydraulic testing machine 1332 INSTRON-100 kN by introducing fatigue crack in the weld metal region of the welded joint. 
After that specimens were analysed using digital image correlation software ARAMIS. This optical measuring system, in addition to the software also includes two cameras, which were used to record images of crack propagation in three dimensions, as well as the strain field.
C3  - 4 th INTERNATIONAL SCIENTIFIC CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING (ISCAME 2016
T1  - Non-contact monitoring of fatigue crack growth via digital image correlation method
EP  - 468
SP  - 463
UR  - https://hdl.handle.net/21.15107/rcub_machinery_6148
ER  - 

@conference{
author = "Sedmak, Simon and Milović, Ljubica and Jovičić, Radomir and Đorđević, Branislav and Džindo, Emina and Zrilić, Milorad and Maneski, Taško",
year = "2016",
abstract = "The aim of this paper is to present the possibilities of application of digital image correlation (DIC)
method in measuring crack propagation in a welded joint specimen with a notch. For this purpose, specimens were taken from butt welded plates, made of P460NL1 micro-alloyed steel, which is typically used in manufacturing of pressure vessels, such as pipelines and storage tanks. Solid wire FILTUB 12M was used as additional material for the welded joints. Fatigue pre-cracking of threepoint bending specimens was done on the hydraulic testing machine 1332 INSTRON-100 kN by introducing fatigue crack in the weld metal region of the welded joint. 
After that specimens were analysed using digital image correlation software ARAMIS. This optical measuring system, in addition to the software also includes two cameras, which were used to record images of crack propagation in three dimensions, as well as the strain field.",
journal = "4 th INTERNATIONAL SCIENTIFIC CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING (ISCAME 2016",
title = "Non-contact monitoring of fatigue crack growth via digital image correlation method",
pages = "468-463",
url = "https://hdl.handle.net/21.15107/rcub_machinery_6148"
}

Sedmak, S., Milović, L., Jovičić, R., Đorđević, B., Džindo, E., Zrilić, M.,& Maneski, T.. (2016). Non-contact monitoring of fatigue crack growth via digital image correlation method. in 4 th INTERNATIONAL SCIENTIFIC CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING (ISCAME 2016, 463-468.
https://hdl.handle.net/21.15107/rcub_machinery_6148

Sedmak S, Milović L, Jovičić R, Đorđević B, Džindo E, Zrilić M, Maneski T. Non-contact monitoring of fatigue crack growth via digital image correlation method. in 4 th INTERNATIONAL SCIENTIFIC CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING (ISCAME 2016. 2016;:463-468.
https://hdl.handle.net/21.15107/rcub_machinery_6148 .

Sedmak, Simon, Milović, Ljubica, Jovičić, Radomir, Đorđević, Branislav, Džindo, Emina, Zrilić, Milorad, Maneski, Taško, "Non-contact monitoring of fatigue crack growth via digital image correlation method" in 4 th INTERNATIONAL SCIENTIFIC CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING (ISCAME 2016 (2016):463-468,
https://hdl.handle.net/21.15107/rcub_machinery_6148 .

TY  - CONF
AU  - Sedmak, Simon
AU  - Algool, Mandi
AU  - Sedmak, Aleksandar
AU  - Tatić, Uroš
AU  - Džindo, Emina
PY  - 2016
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/2292
AB  - In this paper elastic-plastic behaviour of welded joints during loading and unloading of pressure vessel has been analysed. Two stage pressuring process has been applied in previous experimental investigation and simulated using the finite element method. The effect of residual stress and strain has been analysed.
PB  - Elsevier Science Bv, Amsterdam
C3  - Procedia Structural Integrity - 21st European Conference on Fracture, (Ecf21)
T1  - Elastic-plastic behaviour of welded joints during loading and unloading of pressure vessels
EP  - 3553
SP  - 3546
VL  - 2
DO  - 10.1016/j.prostr.2016.06.442
ER  - 

@conference{
author = "Sedmak, Simon and Algool, Mandi and Sedmak, Aleksandar and Tatić, Uroš and Džindo, Emina",
year = "2016",
abstract = "In this paper elastic-plastic behaviour of welded joints during loading and unloading of pressure vessel has been analysed. Two stage pressuring process has been applied in previous experimental investigation and simulated using the finite element method. The effect of residual stress and strain has been analysed.",
publisher = "Elsevier Science Bv, Amsterdam",
journal = "Procedia Structural Integrity - 21st European Conference on Fracture, (Ecf21)",
title = "Elastic-plastic behaviour of welded joints during loading and unloading of pressure vessels",
pages = "3553-3546",
volume = "2",
doi = "10.1016/j.prostr.2016.06.442"
}

Sedmak, S., Algool, M., Sedmak, A., Tatić, U.,& Džindo, E.. (2016). Elastic-plastic behaviour of welded joints during loading and unloading of pressure vessels. in Procedia Structural Integrity - 21st European Conference on Fracture, (Ecf21)
Elsevier Science Bv, Amsterdam., 2, 3546-3553.
https://doi.org/10.1016/j.prostr.2016.06.442

Sedmak S, Algool M, Sedmak A, Tatić U, Džindo E. Elastic-plastic behaviour of welded joints during loading and unloading of pressure vessels. in Procedia Structural Integrity - 21st European Conference on Fracture, (Ecf21). 2016;2:3546-3553.
doi:10.1016/j.prostr.2016.06.442 .

Sedmak, Simon, Algool, Mandi, Sedmak, Aleksandar, Tatić, Uroš, Džindo, Emina, "Elastic-plastic behaviour of welded joints during loading and unloading of pressure vessels" in Procedia Structural Integrity - 21st European Conference on Fracture, (Ecf21), 2 (2016):3546-3553,
https://doi.org/10.1016/j.prostr.2016.06.442 . .

TY  - CONF
AU  - Sajić, J.L.
AU  - Tatić, Uroš
AU  - Petrović, S.
AU  - Džindo, Emina
PY  - 2014
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1939
PB  - VDI Verein Deutscher Ingenieure
C3  - 31st Danubia-Adria Symposium on Advances in Experimental Mechanics, DAS 2014 - Proceedings
T1  - Control algorithm applied on the diesel engine
EP  - 63
SP  - 60
UR  - https://hdl.handle.net/21.15107/rcub_machinery_1939
ER  - 

@conference{
author = "Sajić, J.L. and Tatić, Uroš and Petrović, S. and Džindo, Emina",
year = "2014",
publisher = "VDI Verein Deutscher Ingenieure",
journal = "31st Danubia-Adria Symposium on Advances in Experimental Mechanics, DAS 2014 - Proceedings",
title = "Control algorithm applied on the diesel engine",
pages = "63-60",
url = "https://hdl.handle.net/21.15107/rcub_machinery_1939"
}

Sajić, J.L., Tatić, U., Petrović, S.,& Džindo, E.. (2014). Control algorithm applied on the diesel engine. in 31st Danubia-Adria Symposium on Advances in Experimental Mechanics, DAS 2014 - Proceedings
VDI Verein Deutscher Ingenieure., 60-63.
https://hdl.handle.net/21.15107/rcub_machinery_1939

Sajić J, Tatić U, Petrović S, Džindo E. Control algorithm applied on the diesel engine. in 31st Danubia-Adria Symposium on Advances in Experimental Mechanics, DAS 2014 - Proceedings. 2014;:60-63.
https://hdl.handle.net/21.15107/rcub_machinery_1939 .

Sajić, J.L., Tatić, Uroš, Petrović, S., Džindo, Emina, "Control algorithm applied on the diesel engine" in 31st Danubia-Adria Symposium on Advances in Experimental Mechanics, DAS 2014 - Proceedings (2014):60-63,
https://hdl.handle.net/21.15107/rcub_machinery_1939 .

TY  - CONF
AU  - Smiljanić, P.
AU  - Sedmak, Aleksandar
AU  - Džindo, Emina
PY  - 2013
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1764
PB  - Croatian Society of Mechanics
C3  - 30th DANUBlA-ADRIA Symposium on Advances in Experimental Mechanics, DAS 2013 - Proceedings
T1  - Experimental stress-strain analysis of composite beams
EP  - 164
SP  - 163
UR  - https://hdl.handle.net/21.15107/rcub_machinery_1764
ER  - 

@conference{
author = "Smiljanić, P. and Sedmak, Aleksandar and Džindo, Emina",
year = "2013",
publisher = "Croatian Society of Mechanics",
journal = "30th DANUBlA-ADRIA Symposium on Advances in Experimental Mechanics, DAS 2013 - Proceedings",
title = "Experimental stress-strain analysis of composite beams",
pages = "164-163",
url = "https://hdl.handle.net/21.15107/rcub_machinery_1764"
}

Smiljanić, P., Sedmak, A.,& Džindo, E.. (2013). Experimental stress-strain analysis of composite beams. in 30th DANUBlA-ADRIA Symposium on Advances in Experimental Mechanics, DAS 2013 - Proceedings
Croatian Society of Mechanics., 163-164.
https://hdl.handle.net/21.15107/rcub_machinery_1764

Smiljanić P, Sedmak A, Džindo E. Experimental stress-strain analysis of composite beams. in 30th DANUBlA-ADRIA Symposium on Advances in Experimental Mechanics, DAS 2013 - Proceedings. 2013;:163-164.
https://hdl.handle.net/21.15107/rcub_machinery_1764 .

Smiljanić, P., Sedmak, Aleksandar, Džindo, Emina, "Experimental stress-strain analysis of composite beams" in 30th DANUBlA-ADRIA Symposium on Advances in Experimental Mechanics, DAS 2013 - Proceedings (2013):163-164,
https://hdl.handle.net/21.15107/rcub_machinery_1764 .

TY  - CONF
AU  - Smiljanić, P.
AU  - Sedmak, Aleksandar
AU  - Džindo, Emina
AU  - Veg, Emil
PY  - 2012
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6398
AB  - A structural member composed of two or more dissimilar materials joined together to act as a unit. There are two main benefits of composite action in structural members. First, by rigidly joining the two parts together, the resulting system is stronger than the sum of its parts. Second, composite action can better utilize the properties of each constituent material. Composites consisting of resin matrices reinforced with discontinuous glass fibers and continuous glass-fiber mats are widely used in truck and automobile components bearing light loads.
C3  - Proceedings of the 2nd International Conference on manufacturing engineering & management - ICMEM 2012
T1  - Experimental and Numerical Stress-Strain Analysis of Composite Beams
EP  - 169
SP  - 167
UR  - https://hdl.handle.net/21.15107/rcub_machinery_6398
ER  - 

@conference{
author = "Smiljanić, P. and Sedmak, Aleksandar and Džindo, Emina and Veg, Emil",
year = "2012",
abstract = "A structural member composed of two or more dissimilar materials joined together to act as a unit. There are two main benefits of composite action in structural members. First, by rigidly joining the two parts together, the resulting system is stronger than the sum of its parts. Second, composite action can better utilize the properties of each constituent material. Composites consisting of resin matrices reinforced with discontinuous glass fibers and continuous glass-fiber mats are widely used in truck and automobile components bearing light loads.",
journal = "Proceedings of the 2nd International Conference on manufacturing engineering & management - ICMEM 2012",
title = "Experimental and Numerical Stress-Strain Analysis of Composite Beams",
pages = "169-167",
url = "https://hdl.handle.net/21.15107/rcub_machinery_6398"
}

Smiljanić, P., Sedmak, A., Džindo, E.,& Veg, E.. (2012). Experimental and Numerical Stress-Strain Analysis of Composite Beams. in Proceedings of the 2nd International Conference on manufacturing engineering & management - ICMEM 2012, 167-169.
https://hdl.handle.net/21.15107/rcub_machinery_6398

Smiljanić P, Sedmak A, Džindo E, Veg E. Experimental and Numerical Stress-Strain Analysis of Composite Beams. in Proceedings of the 2nd International Conference on manufacturing engineering & management - ICMEM 2012. 2012;:167-169.
https://hdl.handle.net/21.15107/rcub_machinery_6398 .

Smiljanić, P., Sedmak, Aleksandar, Džindo, Emina, Veg, Emil, "Experimental and Numerical Stress-Strain Analysis of Composite Beams" in Proceedings of the 2nd International Conference on manufacturing engineering & management - ICMEM 2012 (2012):167-169,
https://hdl.handle.net/21.15107/rcub_machinery_6398 .

TY  - CONF
AU  - Ńajić, J.L.
AU  - Mladenović, Saša
AU  - Džindo, Emina
PY  - 2012
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1558
PB  - University of Belgrade
C3  - 29th DANUBlA-ADRIA Symposium on Advances in Experimental Mechanics, DAS 2012
T1  - Modeling of welded steel X20 and X22
EP  - 257
SP  - 254
UR  - https://hdl.handle.net/21.15107/rcub_machinery_1558
ER  - 

@conference{
author = "Ńajić, J.L. and Mladenović, Saša and Džindo, Emina",
year = "2012",
publisher = "University of Belgrade",
journal = "29th DANUBlA-ADRIA Symposium on Advances in Experimental Mechanics, DAS 2012",
title = "Modeling of welded steel X20 and X22",
pages = "257-254",
url = "https://hdl.handle.net/21.15107/rcub_machinery_1558"
}

Ńajić, J.L., Mladenović, S.,& Džindo, E.. (2012). Modeling of welded steel X20 and X22. in 29th DANUBlA-ADRIA Symposium on Advances in Experimental Mechanics, DAS 2012
University of Belgrade., 254-257.
https://hdl.handle.net/21.15107/rcub_machinery_1558

Ńajić J, Mladenović S, Džindo E. Modeling of welded steel X20 and X22. in 29th DANUBlA-ADRIA Symposium on Advances in Experimental Mechanics, DAS 2012. 2012;:254-257.
https://hdl.handle.net/21.15107/rcub_machinery_1558 .

Ńajić, J.L., Mladenović, Saša, Džindo, Emina, "Modeling of welded steel X20 and X22" in 29th DANUBlA-ADRIA Symposium on Advances in Experimental Mechanics, DAS 2012 (2012):254-257,
https://hdl.handle.net/21.15107/rcub_machinery_1558 .

TY  - JOUR
AU  - Kirin, Snežana
AU  - Jovanović, Aleksandar
AU  - Stanojević, Petar
AU  - Sedmak, Aleksandar
AU  - Džindo, Emina
PY  - 2011
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1311
AB  - Prikazana je primena analize rizika integriteta konstrukcija na primeru velike, kompleksne kompanije, koja se sastoji iz nekoliko proizvodnih jedinica i kod koje su procesi i procesna oprema od suštinskog značaja za proizvodnju. Analiza je ukazala na 15% opreme sa povećanim rizikom.
AB  - The application of risk analysis in structural integrity assessment of large, complex company, comprising several production units, where processes and process equipment are the essence of production, has been presented. Analysis has indicted 15% of equipment with increased risk.
PB  - Institut za ispitivanje materijala, Beograd
T2  - Structural Integrity and Life
T1  - Analiza rizika integriteta konstrukcija - primena na veliku kompaniju
T1  - Risk analysis in structural integrity: Application to a large company
EP  - 212
IS  - 3
SP  - 209
VL  - 11
UR  - https://hdl.handle.net/21.15107/rcub_machinery_1311
ER  - 

@article{
author = "Kirin, Snežana and Jovanović, Aleksandar and Stanojević, Petar and Sedmak, Aleksandar and Džindo, Emina",
year = "2011",
abstract = "Prikazana je primena analize rizika integriteta konstrukcija na primeru velike, kompleksne kompanije, koja se sastoji iz nekoliko proizvodnih jedinica i kod koje su procesi i procesna oprema od suštinskog značaja za proizvodnju. Analiza je ukazala na 15% opreme sa povećanim rizikom., The application of risk analysis in structural integrity assessment of large, complex company, comprising several production units, where processes and process equipment are the essence of production, has been presented. Analysis has indicted 15% of equipment with increased risk.",
publisher = "Institut za ispitivanje materijala, Beograd",
journal = "Structural Integrity and Life",
title = "Analiza rizika integriteta konstrukcija - primena na veliku kompaniju, Risk analysis in structural integrity: Application to a large company",
pages = "212-209",
number = "3",
volume = "11",
url = "https://hdl.handle.net/21.15107/rcub_machinery_1311"
}

Kirin, S., Jovanović, A., Stanojević, P., Sedmak, A.,& Džindo, E.. (2011). Analiza rizika integriteta konstrukcija - primena na veliku kompaniju. in Structural Integrity and Life
Institut za ispitivanje materijala, Beograd., 11(3), 209-212.
https://hdl.handle.net/21.15107/rcub_machinery_1311

Kirin S, Jovanović A, Stanojević P, Sedmak A, Džindo E. Analiza rizika integriteta konstrukcija - primena na veliku kompaniju. in Structural Integrity and Life. 2011;11(3):209-212.
https://hdl.handle.net/21.15107/rcub_machinery_1311 .

Kirin, Snežana, Jovanović, Aleksandar, Stanojević, Petar, Sedmak, Aleksandar, Džindo, Emina, "Analiza rizika integriteta konstrukcija - primena na veliku kompaniju" in Structural Integrity and Life, 11, no. 3 (2011):209-212,
https://hdl.handle.net/21.15107/rcub_machinery_1311 .

TY  - JOUR
AU  - Đorđević, P.
AU  - Kirin, Snežana
AU  - Sedmak, Aleksandar
AU  - Džindo, Emina
PY  - 2011
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1145
AB  - Risk analysis has been presented, as the new approach for solving problems in structural integrity assessment. The inspection concepts have been described, based on risk (RBI) and reliability (RCM), focused on companies with processes and equipment being its production essence, where integrity risk is the core of risk management, as the crucial part of modern business performance.
PB  - Institut za ispitivanje materijala, Beograd
T2  - Structural Integrity and Life
T1  - Analiza rizika integriteta konstrukcija
T1  - Risk analysis in structural integrity
EP  - 138
IS  - 2
SP  - 135
VL  - 11
UR  - https://hdl.handle.net/21.15107/rcub_machinery_1145
ER  - 

@article{
author = "Đorđević, P. and Kirin, Snežana and Sedmak, Aleksandar and Džindo, Emina",
year = "2011",
abstract = "Risk analysis has been presented, as the new approach for solving problems in structural integrity assessment. The inspection concepts have been described, based on risk (RBI) and reliability (RCM), focused on companies with processes and equipment being its production essence, where integrity risk is the core of risk management, as the crucial part of modern business performance.",
publisher = "Institut za ispitivanje materijala, Beograd",
journal = "Structural Integrity and Life",
title = "Analiza rizika integriteta konstrukcija, Risk analysis in structural integrity",
pages = "138-135",
number = "2",
volume = "11",
url = "https://hdl.handle.net/21.15107/rcub_machinery_1145"
}

Đorđević, P., Kirin, S., Sedmak, A.,& Džindo, E.. (2011). Analiza rizika integriteta konstrukcija. in Structural Integrity and Life
Institut za ispitivanje materijala, Beograd., 11(2), 135-138.
https://hdl.handle.net/21.15107/rcub_machinery_1145

Đorđević P, Kirin S, Sedmak A, Džindo E. Analiza rizika integriteta konstrukcija. in Structural Integrity and Life. 2011;11(2):135-138.
https://hdl.handle.net/21.15107/rcub_machinery_1145 .

Đorđević, P., Kirin, Snežana, Sedmak, Aleksandar, Džindo, Emina, "Analiza rizika integriteta konstrukcija" in Structural Integrity and Life, 11, no. 2 (2011):135-138,
https://hdl.handle.net/21.15107/rcub_machinery_1145 .

TY  - JOUR
AU  - Djoković, Jelena M.
AU  - Nikolić, Ružica R.
AU  - Džindo, Emina
AU  - Ćatić, Dobrivoje M.
PY  - 2011
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1314
AB  - Dimensioning of pressure vessels can be done according to various criteria, the basic one being the safety against the fracture by splashing. In this paper two methods for this dimensioning procedure are presented. The first one is based on application of the classical mechanics while the second one uses the fracture mechanics principles. Both methods were applied for checking the exploitation properties and capability of a vapor distributor in a power plant. Based on the in-situ measured damages and calculations by both methods, it was concluded that the vapor distributor could be further used as a part of the boiler installation in the local power plant. The second criterion, based on the application of the fracture mechanics principles, provided more reliable results than the first one, based on the classical mechanics.
PB  - Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek
T2  - Tehnički vjesnik
T1  - Estimate of a power distributor life span based on the fracture mechanics criteria
EP  - 108
IS  - 1
SP  - 103
VL  - 18
UR  - https://hdl.handle.net/21.15107/rcub_machinery_1314
ER  - 

@article{
author = "Djoković, Jelena M. and Nikolić, Ružica R. and Džindo, Emina and Ćatić, Dobrivoje M.",
year = "2011",
abstract = "Dimensioning of pressure vessels can be done according to various criteria, the basic one being the safety against the fracture by splashing. In this paper two methods for this dimensioning procedure are presented. The first one is based on application of the classical mechanics while the second one uses the fracture mechanics principles. Both methods were applied for checking the exploitation properties and capability of a vapor distributor in a power plant. Based on the in-situ measured damages and calculations by both methods, it was concluded that the vapor distributor could be further used as a part of the boiler installation in the local power plant. The second criterion, based on the application of the fracture mechanics principles, provided more reliable results than the first one, based on the classical mechanics.",
publisher = "Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek",
journal = "Tehnički vjesnik",
title = "Estimate of a power distributor life span based on the fracture mechanics criteria",
pages = "108-103",
number = "1",
volume = "18",
url = "https://hdl.handle.net/21.15107/rcub_machinery_1314"
}

Djoković, J. M., Nikolić, R. R., Džindo, E.,& Ćatić, D. M.. (2011). Estimate of a power distributor life span based on the fracture mechanics criteria. in Tehnički vjesnik
Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek., 18(1), 103-108.
https://hdl.handle.net/21.15107/rcub_machinery_1314

Djoković JM, Nikolić RR, Džindo E, Ćatić DM. Estimate of a power distributor life span based on the fracture mechanics criteria. in Tehnički vjesnik. 2011;18(1):103-108.
https://hdl.handle.net/21.15107/rcub_machinery_1314 .

Djoković, Jelena M., Nikolić, Ružica R., Džindo, Emina, Ćatić, Dobrivoje M., "Estimate of a power distributor life span based on the fracture mechanics criteria" in Tehnički vjesnik, 18, no. 1 (2011):103-108,
https://hdl.handle.net/21.15107/rcub_machinery_1314 .

TY  - JOUR
AU  - Đorđević, Predrag
AU  - Kirin, Snežana
AU  - Sedmak, Aleksandar
AU  - Džindo, Emina
PY  - 2011
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1244
AB  - Prikazana je analiza rizika kao nov pristup rešavanju problema procene integriteta konstrukcija. Opisani su koncepti kontrole zasnovane na rizicima (RBI) i održavanja zasnovanog na pouzdanosti (RCM) sa posebnim osvrtom na kompanije gde su procesi i oprema od suštinskog značaja za proizvodnju i gde je rizik integriteta u centru upravljanja rizikom, kao savremenog načina poslovanja.
AB  - Risk analysis has been presented, as the new approach for solving problems in structural integrity assessment. The inspection concepts have been described, based on risk (RBI) and reliability (RCM), focused on companies with processes and equipment being its production essence, where integrity risk is the core of risk management, as the crucial part of modern business performance.
PB  - Institut za ispitivanje materijala, Beograd
T2  - Integritet i vek konstrukcija
T1  - Analiza rizika integriteta konstrukcija
T1  - Risk analysis in structural integrity
EP  - 138
IS  - 2
SP  - 134
VL  - 11
UR  - https://hdl.handle.net/21.15107/rcub_machinery_1244
ER  - 

@article{
author = "Đorđević, Predrag and Kirin, Snežana and Sedmak, Aleksandar and Džindo, Emina",
year = "2011",
abstract = "Prikazana je analiza rizika kao nov pristup rešavanju problema procene integriteta konstrukcija. Opisani su koncepti kontrole zasnovane na rizicima (RBI) i održavanja zasnovanog na pouzdanosti (RCM) sa posebnim osvrtom na kompanije gde su procesi i oprema od suštinskog značaja za proizvodnju i gde je rizik integriteta u centru upravljanja rizikom, kao savremenog načina poslovanja., Risk analysis has been presented, as the new approach for solving problems in structural integrity assessment. The inspection concepts have been described, based on risk (RBI) and reliability (RCM), focused on companies with processes and equipment being its production essence, where integrity risk is the core of risk management, as the crucial part of modern business performance.",
publisher = "Institut za ispitivanje materijala, Beograd",
journal = "Integritet i vek konstrukcija",
title = "Analiza rizika integriteta konstrukcija, Risk analysis in structural integrity",
pages = "138-134",
number = "2",
volume = "11",
url = "https://hdl.handle.net/21.15107/rcub_machinery_1244"
}

Đorđević, P., Kirin, S., Sedmak, A.,& Džindo, E.. (2011). Analiza rizika integriteta konstrukcija. in Integritet i vek konstrukcija
Institut za ispitivanje materijala, Beograd., 11(2), 134-138.
https://hdl.handle.net/21.15107/rcub_machinery_1244

Đorđević P, Kirin S, Sedmak A, Džindo E. Analiza rizika integriteta konstrukcija. in Integritet i vek konstrukcija. 2011;11(2):134-138.
https://hdl.handle.net/21.15107/rcub_machinery_1244 .

Đorđević, Predrag, Kirin, Snežana, Sedmak, Aleksandar, Džindo, Emina, "Analiza rizika integriteta konstrukcija" in Integritet i vek konstrukcija, 11, no. 2 (2011):134-138,
https://hdl.handle.net/21.15107/rcub_machinery_1244 .