TY  - JOUR
AU  - Lazić, Vukić
AU  - Sedmak, Aleksandar
AU  - Samardžić, I.
AU  - Aleksandrović, Srbislav
AU  - Milosavljević, Dragan I.
AU  - Arsić, D.
AU  - Đorđević, M.
PY  - 2016
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/2313
AB  - This paper points out complex working conditions of forging dies, which are the most frequent causes of their damage, and proposes suitable hard-facing repair procedures. The shear strength between the hard-faced layer and base metal has been measured using specially developed tool, and correlation between output results and the applied hard-facing technology is established.
PB  - Faculty of Metallurgy
T2  - Metalurgija
T1  - Determination of bond strength between the hard-faced (HF) layer and the base material (BM) of forging dies
EP  - 94
IS  - 1
SP  - 91
VL  - 55
UR  - https://hdl.handle.net/21.15107/rcub_machinery_2313
ER  - 

@article{
author = "Lazić, Vukić and Sedmak, Aleksandar and Samardžić, I. and Aleksandrović, Srbislav and Milosavljević, Dragan I. and Arsić, D. and Đorđević, M.",
year = "2016",
abstract = "This paper points out complex working conditions of forging dies, which are the most frequent causes of their damage, and proposes suitable hard-facing repair procedures. The shear strength between the hard-faced layer and base metal has been measured using specially developed tool, and correlation between output results and the applied hard-facing technology is established.",
publisher = "Faculty of Metallurgy",
journal = "Metalurgija",
title = "Determination of bond strength between the hard-faced (HF) layer and the base material (BM) of forging dies",
pages = "94-91",
number = "1",
volume = "55",
url = "https://hdl.handle.net/21.15107/rcub_machinery_2313"
}

Lazić, V., Sedmak, A., Samardžić, I., Aleksandrović, S., Milosavljević, D. I., Arsić, D.,& Đorđević, M.. (2016). Determination of bond strength between the hard-faced (HF) layer and the base material (BM) of forging dies. in Metalurgija
Faculty of Metallurgy., 55(1), 91-94.
https://hdl.handle.net/21.15107/rcub_machinery_2313

Lazić V, Sedmak A, Samardžić I, Aleksandrović S, Milosavljević DI, Arsić D, Đorđević M. Determination of bond strength between the hard-faced (HF) layer and the base material (BM) of forging dies. in Metalurgija. 2016;55(1):91-94.
https://hdl.handle.net/21.15107/rcub_machinery_2313 .

Lazić, Vukić, Sedmak, Aleksandar, Samardžić, I., Aleksandrović, Srbislav, Milosavljević, Dragan I., Arsić, D., Đorđević, M., "Determination of bond strength between the hard-faced (HF) layer and the base material (BM) of forging dies" in Metalurgija, 55, no. 1 (2016):91-94,
https://hdl.handle.net/21.15107/rcub_machinery_2313 .

TY  - JOUR
AU  - Essari, A.
AU  - Sariuglo, F.
AU  - Petrović, Z.
AU  - Sedmak, Aleksandar
AU  - Samardžić, I.
PY  - 2016
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/2376
AB  - In this study, Al-8Fe-8Si-1.4V/SiCp composites fabricated by squeeze casting process were age-hardened to Study the influence of heat treatment on mechanical properties, such as hardness, bending strength and modulus of elasticity. The cast samples were solid sоluted at 540 °C for one hour, then quenched in water to room temperature, and finally aged at 190 °C for 2, 4, 6, 8 and 10 hours for hardness test and at 195 °C for 2, 6 and 10 hours for bending strength determination.
PB  - Faculty of Metallurgy
T2  - Metalurgija
T1  - Effect of aging on mechanical properties of Al-8Si-8Fe-1.4v/SiCp composites
EP  - 192
IS  - 2
SP  - 189
VL  - 55
UR  - https://hdl.handle.net/21.15107/rcub_machinery_2376
ER  - 

@article{
author = "Essari, A. and Sariuglo, F. and Petrović, Z. and Sedmak, Aleksandar and Samardžić, I.",
year = "2016",
abstract = "In this study, Al-8Fe-8Si-1.4V/SiCp composites fabricated by squeeze casting process were age-hardened to Study the influence of heat treatment on mechanical properties, such as hardness, bending strength and modulus of elasticity. The cast samples were solid sоluted at 540 °C for one hour, then quenched in water to room temperature, and finally aged at 190 °C for 2, 4, 6, 8 and 10 hours for hardness test and at 195 °C for 2, 6 and 10 hours for bending strength determination.",
publisher = "Faculty of Metallurgy",
journal = "Metalurgija",
title = "Effect of aging on mechanical properties of Al-8Si-8Fe-1.4v/SiCp composites",
pages = "192-189",
number = "2",
volume = "55",
url = "https://hdl.handle.net/21.15107/rcub_machinery_2376"
}

Essari, A., Sariuglo, F., Petrović, Z., Sedmak, A.,& Samardžić, I.. (2016). Effect of aging on mechanical properties of Al-8Si-8Fe-1.4v/SiCp composites. in Metalurgija
Faculty of Metallurgy., 55(2), 189-192.
https://hdl.handle.net/21.15107/rcub_machinery_2376

Essari A, Sariuglo F, Petrović Z, Sedmak A, Samardžić I. Effect of aging on mechanical properties of Al-8Si-8Fe-1.4v/SiCp composites. in Metalurgija. 2016;55(2):189-192.
https://hdl.handle.net/21.15107/rcub_machinery_2376 .

Essari, A., Sariuglo, F., Petrović, Z., Sedmak, Aleksandar, Samardžić, I., "Effect of aging on mechanical properties of Al-8Si-8Fe-1.4v/SiCp composites" in Metalurgija, 55, no. 2 (2016):189-192,
https://hdl.handle.net/21.15107/rcub_machinery_2376 .

TY  - JOUR
AU  - Lazić, Vukić
AU  - Sedmak, Aleksandar
AU  - Samardžić, I.
AU  - Aleksandrović, Srbislav
AU  - Arsić, D.
AU  - Milosavljević, Dragan I.
AU  - Đorđević, M.
PY  - 2015
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/2111
AB  - Complex working conditions of forging dies are the most frequent causes of their damage, requiring suitable hard facing repair procedures. The method of determining the bond strength between the hardfaced layer and the base material is explained in details, and the relation between hardfaced layer output results and the applied technology is established. Shear testing of materials has proven to be one of the most difficult areas of mechanical property testing. Shear modulus measurements are mainly accurate, but it is very difficult to measure shear strength. Edges, material coupling, non-pure shear loading, non-linear behaviour, imperfect stress distribution and coupling with normal stresses make shear strength determination difficult. None of the available test methods are without inaccuracies. Therefore, in structural applications, shear strength data should be used very carefully, on a case-by-case basis, appreciating the consequences of potential inaccuracies of the used values.
PB  - Institut za ispitivanje materijala, Beograd
T2  - Structural Integrity and Life
T1  - Shear strength testing of hardfaced samples using special tool on an universal testing machine
EP  - 18
IS  - 1
SP  - 15
VL  - 15
UR  - https://hdl.handle.net/21.15107/rcub_machinery_2111
ER  - 

@article{
author = "Lazić, Vukić and Sedmak, Aleksandar and Samardžić, I. and Aleksandrović, Srbislav and Arsić, D. and Milosavljević, Dragan I. and Đorđević, M.",
year = "2015",
abstract = "Complex working conditions of forging dies are the most frequent causes of their damage, requiring suitable hard facing repair procedures. The method of determining the bond strength between the hardfaced layer and the base material is explained in details, and the relation between hardfaced layer output results and the applied technology is established. Shear testing of materials has proven to be one of the most difficult areas of mechanical property testing. Shear modulus measurements are mainly accurate, but it is very difficult to measure shear strength. Edges, material coupling, non-pure shear loading, non-linear behaviour, imperfect stress distribution and coupling with normal stresses make shear strength determination difficult. None of the available test methods are without inaccuracies. Therefore, in structural applications, shear strength data should be used very carefully, on a case-by-case basis, appreciating the consequences of potential inaccuracies of the used values.",
publisher = "Institut za ispitivanje materijala, Beograd",
journal = "Structural Integrity and Life",
title = "Shear strength testing of hardfaced samples using special tool on an universal testing machine",
pages = "18-15",
number = "1",
volume = "15",
url = "https://hdl.handle.net/21.15107/rcub_machinery_2111"
}

Lazić, V., Sedmak, A., Samardžić, I., Aleksandrović, S., Arsić, D., Milosavljević, D. I.,& Đorđević, M.. (2015). Shear strength testing of hardfaced samples using special tool on an universal testing machine. in Structural Integrity and Life
Institut za ispitivanje materijala, Beograd., 15(1), 15-18.
https://hdl.handle.net/21.15107/rcub_machinery_2111

Lazić V, Sedmak A, Samardžić I, Aleksandrović S, Arsić D, Milosavljević DI, Đorđević M. Shear strength testing of hardfaced samples using special tool on an universal testing machine. in Structural Integrity and Life. 2015;15(1):15-18.
https://hdl.handle.net/21.15107/rcub_machinery_2111 .

Lazić, Vukić, Sedmak, Aleksandar, Samardžić, I., Aleksandrović, Srbislav, Arsić, D., Milosavljević, Dragan I., Đorđević, M., "Shear strength testing of hardfaced samples using special tool on an universal testing machine" in Structural Integrity and Life, 15, no. 1 (2015):15-18,
https://hdl.handle.net/21.15107/rcub_machinery_2111 .