TY  - JOUR
AU  - Grujičić, Rade
AU  - Tica, Milan
AU  - Stojanović, Blaža
AU  - Ivanović, Lozica
AU  - Mitrović, Radivoje
AU  - Tomović, Radoslav
PY  - 2022
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/3794
AB  - Potrebno je odgovarajuće podmazivanje kotrljajućeg ležaja kako bi se smanjilo trenje između površina u međusobnom kontaktu i njihovo habanje. Mazivo bi trebalo da u potpunosti odvoji kotrljajuće elemente od staza. U radu su analizirane vrednosti koje utiču na efikasnost i režime podmazivanja, nakon čega se uvodi koeficijent režima podmazivanja. Ovaj koeficijent omogućava da se na jednostavan i brz način odabere optimalna kombinacija kotrljajućeg ležaja i maziva na osnovu poznate brzine osovine, spoljašnjeg opterećenja i radne temperature kotrljajućeg ležaja. Za pojedine ležajeve sa radijalnim kontaktom i određena maziva prikazana je zavisnost režima podmazivanja od brzine osovine i kontaktnog opterećenja.
AB  - Appropriate lubrication of the rolling bearing is needed to lower the friction between the surfaces in mutual contact and their wear. A lubricant should completely separate the rolling elements from the raceways. The values that affect the efficiency and regimes of lubrication are analyzed in the paper, after which it is introduced a lubrication regime coefficient. This coefficient makes it possible to choose in a simple and fast manner an optimum combination of rolling bearing and lubricant based on the known shaft speed, external load, and rolling bearing operating temperature. For certain bearings with radial contact and certain lubricants, the lubrication regime dependence on the shaft speed and contact load is shown.
PB  - Univerzitet u Beogradu - Mašinski fakultet, Beograd
T2  - FME Transactions
T1  - Analiza uticaja brzine vratila i spoljašnjeg opterećenja na režime podmazivanja radijalnih kugličnih ležajeva
T1  - Analysis of impact of shaft speed and external load on the radial ball bearing lubrication regimes
EP  - 120
IS  - 1
SP  - 109
VL  - 50
DO  - 10.5937/fme2201109G
ER  - 

@article{
author = "Grujičić, Rade and Tica, Milan and Stojanović, Blaža and Ivanović, Lozica and Mitrović, Radivoje and Tomović, Radoslav",
year = "2022",
abstract = "Potrebno je odgovarajuće podmazivanje kotrljajućeg ležaja kako bi se smanjilo trenje između površina u međusobnom kontaktu i njihovo habanje. Mazivo bi trebalo da u potpunosti odvoji kotrljajuće elemente od staza. U radu su analizirane vrednosti koje utiču na efikasnost i režime podmazivanja, nakon čega se uvodi koeficijent režima podmazivanja. Ovaj koeficijent omogućava da se na jednostavan i brz način odabere optimalna kombinacija kotrljajućeg ležaja i maziva na osnovu poznate brzine osovine, spoljašnjeg opterećenja i radne temperature kotrljajućeg ležaja. Za pojedine ležajeve sa radijalnim kontaktom i određena maziva prikazana je zavisnost režima podmazivanja od brzine osovine i kontaktnog opterećenja., Appropriate lubrication of the rolling bearing is needed to lower the friction between the surfaces in mutual contact and their wear. A lubricant should completely separate the rolling elements from the raceways. The values that affect the efficiency and regimes of lubrication are analyzed in the paper, after which it is introduced a lubrication regime coefficient. This coefficient makes it possible to choose in a simple and fast manner an optimum combination of rolling bearing and lubricant based on the known shaft speed, external load, and rolling bearing operating temperature. For certain bearings with radial contact and certain lubricants, the lubrication regime dependence on the shaft speed and contact load is shown.",
publisher = "Univerzitet u Beogradu - Mašinski fakultet, Beograd",
journal = "FME Transactions",
title = "Analiza uticaja brzine vratila i spoljašnjeg opterećenja na režime podmazivanja radijalnih kugličnih ležajeva, Analysis of impact of shaft speed and external load on the radial ball bearing lubrication regimes",
pages = "120-109",
number = "1",
volume = "50",
doi = "10.5937/fme2201109G"
}

Grujičić, R., Tica, M., Stojanović, B., Ivanović, L., Mitrović, R.,& Tomović, R.. (2022). Analiza uticaja brzine vratila i spoljašnjeg opterećenja na režime podmazivanja radijalnih kugličnih ležajeva. in FME Transactions
Univerzitet u Beogradu - Mašinski fakultet, Beograd., 50(1), 109-120.
https://doi.org/10.5937/fme2201109G

Grujičić R, Tica M, Stojanović B, Ivanović L, Mitrović R, Tomović R. Analiza uticaja brzine vratila i spoljašnjeg opterećenja na režime podmazivanja radijalnih kugličnih ležajeva. in FME Transactions. 2022;50(1):109-120.
doi:10.5937/fme2201109G .

Grujičić, Rade, Tica, Milan, Stojanović, Blaža, Ivanović, Lozica, Mitrović, Radivoje, Tomović, Radoslav, "Analiza uticaja brzine vratila i spoljašnjeg opterećenja na režime podmazivanja radijalnih kugličnih ležajeva" in FME Transactions, 50, no. 1 (2022):109-120,
https://doi.org/10.5937/fme2201109G . .

TY  - BOOK
AU  - Tica, Milan
AU  - Mitrović, Radivoje
AU  - Miltenović, Aleksandar
AU  - Mišković, Žarko
AU  - Banić, Milan
PY  - 2015
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7079
PB  - Banja Luka : Mašinski fakultet
T1  - Inovacije i patenti : teorija rješavanja pronalazačkih zadataka
EP  - 330
SP  - 1
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7079
ER  - 

@book{
author = "Tica, Milan and Mitrović, Radivoje and Miltenović, Aleksandar and Mišković, Žarko and Banić, Milan",
year = "2015",
publisher = "Banja Luka : Mašinski fakultet",
title = "Inovacije i patenti : teorija rješavanja pronalazačkih zadataka",
pages = "330-1",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7079"
}

Tica, M., Mitrović, R., Miltenović, A., Mišković, Ž.,& Banić, M.. (2015). Inovacije i patenti : teorija rješavanja pronalazačkih zadataka. 
Banja Luka : Mašinski fakultet., 1-330.
https://hdl.handle.net/21.15107/rcub_machinery_7079

Tica M, Mitrović R, Miltenović A, Mišković Ž, Banić M. Inovacije i patenti : teorija rješavanja pronalazačkih zadataka. 2015;:1-330.
https://hdl.handle.net/21.15107/rcub_machinery_7079 .

Tica, Milan, Mitrović, Radivoje, Miltenović, Aleksandar, Mišković, Žarko, Banić, Milan, "Inovacije i patenti : teorija rješavanja pronalazačkih zadataka" (2015):1-330,
https://hdl.handle.net/21.15107/rcub_machinery_7079 .

TY  - BOOK
AU  - Mitrović, Radivoje
AU  - Mišković, Žarko
AU  - Stamenić, Zoran
AU  - Marković, Biljana
AU  - Tica, Milan
PY  - 2015
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7078
PB  - Beograd : Mašinski fakultet
T1  - Osnove tehničkih propisa
EP  - 280
SP  - 1
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7078
ER  - 

@book{
author = "Mitrović, Radivoje and Mišković, Žarko and Stamenić, Zoran and Marković, Biljana and Tica, Milan",
year = "2015",
publisher = "Beograd : Mašinski fakultet",
title = "Osnove tehničkih propisa",
pages = "280-1",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7078"
}

Mitrović, R., Mišković, Ž., Stamenić, Z., Marković, B.,& Tica, M.. (2015). Osnove tehničkih propisa. 
Beograd : Mašinski fakultet., 1-280.
https://hdl.handle.net/21.15107/rcub_machinery_7078

Mitrović R, Mišković Ž, Stamenić Z, Marković B, Tica M. Osnove tehničkih propisa. 2015;:1-280.
https://hdl.handle.net/21.15107/rcub_machinery_7078 .

Mitrović, Radivoje, Mišković, Žarko, Stamenić, Zoran, Marković, Biljana, Tica, Milan, "Osnove tehničkih propisa" (2015):1-280,
https://hdl.handle.net/21.15107/rcub_machinery_7078 .

TY  - JOUR
AU  - Miltenović, Đorđe
AU  - Tica, Milan
AU  - Miltenović, Aleksandar
AU  - Banić, Milan
AU  - Živković, Srđan D.
AU  - Mišković, Žarko
PY  - 2014
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1992
AB  - Crossed helical gears are used in cars and in many household appliances. The trend towards increased comfort in motor vehicles has led to the utilisation of more than a hundred servo-drives in luxury class automobiles. Important advantages of crossed helical gears are their easy and inexpensive design, low noise performance and high gear ratio that can be realised in one step. Sintered steel is a material with very favourable properties for the manufacture of crossed helical gears. High demands are set on gears made from sintered steel regarding wear and pitting load capacity. This report shows the results of the investigation into pitting resistance of crossed helical gears made of iron-based sintered material Fe1.5Cr0.2Mo that has undergone additional treatment.
PB  - Transactions of Famena
T2  - Transactions of Famena
T1  - Pitting of tooth flanks of crossed helical gears made of sintered steel
EP  - 88
IS  - 4
SP  - 77
VL  - 38
UR  - https://hdl.handle.net/21.15107/rcub_machinery_1992
ER  - 

@article{
author = "Miltenović, Đorđe and Tica, Milan and Miltenović, Aleksandar and Banić, Milan and Živković, Srđan D. and Mišković, Žarko",
year = "2014",
abstract = "Crossed helical gears are used in cars and in many household appliances. The trend towards increased comfort in motor vehicles has led to the utilisation of more than a hundred servo-drives in luxury class automobiles. Important advantages of crossed helical gears are their easy and inexpensive design, low noise performance and high gear ratio that can be realised in one step. Sintered steel is a material with very favourable properties for the manufacture of crossed helical gears. High demands are set on gears made from sintered steel regarding wear and pitting load capacity. This report shows the results of the investigation into pitting resistance of crossed helical gears made of iron-based sintered material Fe1.5Cr0.2Mo that has undergone additional treatment.",
publisher = "Transactions of Famena",
journal = "Transactions of Famena",
title = "Pitting of tooth flanks of crossed helical gears made of sintered steel",
pages = "88-77",
number = "4",
volume = "38",
url = "https://hdl.handle.net/21.15107/rcub_machinery_1992"
}

Miltenović, Đ., Tica, M., Miltenović, A., Banić, M., Živković, S. D.,& Mišković, Ž.. (2014). Pitting of tooth flanks of crossed helical gears made of sintered steel. in Transactions of Famena
Transactions of Famena., 38(4), 77-88.
https://hdl.handle.net/21.15107/rcub_machinery_1992

Miltenović Đ, Tica M, Miltenović A, Banić M, Živković SD, Mišković Ž. Pitting of tooth flanks of crossed helical gears made of sintered steel. in Transactions of Famena. 2014;38(4):77-88.
https://hdl.handle.net/21.15107/rcub_machinery_1992 .

Miltenović, Đorđe, Tica, Milan, Miltenović, Aleksandar, Banić, Milan, Živković, Srđan D., Mišković, Žarko, "Pitting of tooth flanks of crossed helical gears made of sintered steel" in Transactions of Famena, 38, no. 4 (2014):77-88,
https://hdl.handle.net/21.15107/rcub_machinery_1992 .