TY  - PAT
AU  - Spasojević Brkić, Vesna
AU  - Veljković, Zorica
AU  - Dondur, Nikola
PY  - 2022
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4412
AB  - Предметни проналазак припада области столица у кранским кабинама. Конкретно,
ради се о ергономски прилагођеној столици у кранској кабини, која омогућава
руковаоцу да заузима различите положаје у периодима рада и одмора, чиме се
побољшавају продуктивност руковаоца дизалица као и индустријска безбедност.
T2  - Glasnik intelektualne svojine
T1  - Ergonomski prilagođene stolice u kranskim kabinama
IS  - 8
UR  - https://hdl.handle.net/21.15107/rcub_machinery_4412
ER  - 

@misc{
author = "Spasojević Brkić, Vesna and Veljković, Zorica and Dondur, Nikola",
year = "2022",
abstract = "Предметни проналазак припада области столица у кранским кабинама. Конкретно,
ради се о ергономски прилагођеној столици у кранској кабини, која омогућава
руковаоцу да заузима различите положаје у периодима рада и одмора, чиме се
побољшавају продуктивност руковаоца дизалица као и индустријска безбедност.",
journal = "Glasnik intelektualne svojine",
title = "Ergonomski prilagođene stolice u kranskim kabinama",
number = "8",
url = "https://hdl.handle.net/21.15107/rcub_machinery_4412"
}

Spasojević Brkić, V., Veljković, Z.,& Dondur, N.. (2022). Ergonomski prilagođene stolice u kranskim kabinama. in Glasnik intelektualne svojine(8).
https://hdl.handle.net/21.15107/rcub_machinery_4412

Spasojević Brkić V, Veljković Z, Dondur N. Ergonomski prilagođene stolice u kranskim kabinama. in Glasnik intelektualne svojine. 2022;(8).
https://hdl.handle.net/21.15107/rcub_machinery_4412 .

Spasojević Brkić, Vesna, Veljković, Zorica, Dondur, Nikola, "Ergonomski prilagođene stolice u kranskim kabinama" in Glasnik intelektualne svojine, no. 8 (2022),
https://hdl.handle.net/21.15107/rcub_machinery_4412 .

TY  - CONF
AU  - Spasojević Brkić, Vesna
AU  - Radojević, Slobodan
AU  - Dondur, Nikola
AU  - Veljković, Zorica
AU  - Macura, Miroslav
PY  - 2021
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/3632
AB  - This paper proposes innovation through “translation” of phonocardiogram signal obtained from electronic stethoscope into an algorithm, procedure and software that gives an opportunity to each primary-care physician either in town or hardly reachable countryside to reliably and cost effectively diagnose mitral valve prolapsed (MVP) without engagement of resources such as highly specialized diagnostic methods that are available only in modern clinical centers, expensive equipment and complex training of experienced cardiologists for interpretation of results together with high maintenance costs analysis its cost-effectiveness. Till now very few research address the cost-effectiveness of various approaches to the patient undergoing medical evaluation, so this paper analyses the economic feasibility of MVP software application through cost-benefit framework. The pay-back period of the invested funds is 4 years and it represents a good investment, while critical sales price is 159 euros per software license and switching number of installations is 429 units.
PB  - Springer Science and Business Media Deutschland GmbH
C3  - Lecture Notes in Networks and Systems
T1  - Software for Diagnostics of Mitral Valve Prolapse: Economic Implications
EP  - 115
SP  - 109
VL  - 265
DO  - 10.1007/978-3-030-79816-1_14
ER  - 

@conference{
author = "Spasojević Brkić, Vesna and Radojević, Slobodan and Dondur, Nikola and Veljković, Zorica and Macura, Miroslav",
year = "2021",
abstract = "This paper proposes innovation through “translation” of phonocardiogram signal obtained from electronic stethoscope into an algorithm, procedure and software that gives an opportunity to each primary-care physician either in town or hardly reachable countryside to reliably and cost effectively diagnose mitral valve prolapsed (MVP) without engagement of resources such as highly specialized diagnostic methods that are available only in modern clinical centers, expensive equipment and complex training of experienced cardiologists for interpretation of results together with high maintenance costs analysis its cost-effectiveness. Till now very few research address the cost-effectiveness of various approaches to the patient undergoing medical evaluation, so this paper analyses the economic feasibility of MVP software application through cost-benefit framework. The pay-back period of the invested funds is 4 years and it represents a good investment, while critical sales price is 159 euros per software license and switching number of installations is 429 units.",
publisher = "Springer Science and Business Media Deutschland GmbH",
journal = "Lecture Notes in Networks and Systems",
title = "Software for Diagnostics of Mitral Valve Prolapse: Economic Implications",
pages = "115-109",
volume = "265",
doi = "10.1007/978-3-030-79816-1_14"
}

Spasojević Brkić, V., Radojević, S., Dondur, N., Veljković, Z.,& Macura, M.. (2021). Software for Diagnostics of Mitral Valve Prolapse: Economic Implications. in Lecture Notes in Networks and Systems
Springer Science and Business Media Deutschland GmbH., 265, 109-115.
https://doi.org/10.1007/978-3-030-79816-1_14

Spasojević Brkić V, Radojević S, Dondur N, Veljković Z, Macura M. Software for Diagnostics of Mitral Valve Prolapse: Economic Implications. in Lecture Notes in Networks and Systems. 2021;265:109-115.
doi:10.1007/978-3-030-79816-1_14 .

Spasojević Brkić, Vesna, Radojević, Slobodan, Dondur, Nikola, Veljković, Zorica, Macura, Miroslav, "Software for Diagnostics of Mitral Valve Prolapse: Economic Implications" in Lecture Notes in Networks and Systems, 265 (2021):109-115,
https://doi.org/10.1007/978-3-030-79816-1_14 . .

TY  - CONF
AU  - Spasojević Brkić, Vesna
AU  - Dondur, Nikola
AU  - Brkić, Aleksandar
AU  - Perišić, Martina
PY  - 2020
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/3432
AB  - This paper proposes innovation through implementation of a real-time computer-aided visual guidance system (VGS) which prevents crane accidents, caused by crane operator’s obstructed view, which can be the cause of collisions between load and obstacles and/or intrusions in the workspace. Proposed VGS allows predicting whether a dangerous event is going to occur and promptly alerts the crane-operator in order to let her/him taking corrective actions during the execution of crane-assisted shifting duties. VGS is equipped with interface which is designed to be simple in terms of the number of commands and easy to use in order to reduce the operators’ stress. Analyses of the economic feasibility of VGS application through cost-benefit framework follows. The payback period of invested funds for the purchase and installation of VGS is 1.5 years and installing and usage of VGS represents a very low risk investment.
PB  - Springer
C3  - Advances in Intelligent Systems and Computing
T1  - Economic Implications of Innovative Visual Guidance System for Crane Cabins
EP  - 139
SP  - 133
VL  - 1207 AISC
DO  - 10.1007/978-3-030-51369-6_18
ER  - 

@conference{
author = "Spasojević Brkić, Vesna and Dondur, Nikola and Brkić, Aleksandar and Perišić, Martina",
year = "2020",
abstract = "This paper proposes innovation through implementation of a real-time computer-aided visual guidance system (VGS) which prevents crane accidents, caused by crane operator’s obstructed view, which can be the cause of collisions between load and obstacles and/or intrusions in the workspace. Proposed VGS allows predicting whether a dangerous event is going to occur and promptly alerts the crane-operator in order to let her/him taking corrective actions during the execution of crane-assisted shifting duties. VGS is equipped with interface which is designed to be simple in terms of the number of commands and easy to use in order to reduce the operators’ stress. Analyses of the economic feasibility of VGS application through cost-benefit framework follows. The payback period of invested funds for the purchase and installation of VGS is 1.5 years and installing and usage of VGS represents a very low risk investment.",
publisher = "Springer",
journal = "Advances in Intelligent Systems and Computing",
title = "Economic Implications of Innovative Visual Guidance System for Crane Cabins",
pages = "139-133",
volume = "1207 AISC",
doi = "10.1007/978-3-030-51369-6_18"
}

Spasojević Brkić, V., Dondur, N., Brkić, A.,& Perišić, M.. (2020). Economic Implications of Innovative Visual Guidance System for Crane Cabins. in Advances in Intelligent Systems and Computing
Springer., 1207 AISC, 133-139.
https://doi.org/10.1007/978-3-030-51369-6_18

Spasojević Brkić V, Dondur N, Brkić A, Perišić M. Economic Implications of Innovative Visual Guidance System for Crane Cabins. in Advances in Intelligent Systems and Computing. 2020;1207 AISC:133-139.
doi:10.1007/978-3-030-51369-6_18 .

Spasojević Brkić, Vesna, Dondur, Nikola, Brkić, Aleksandar, Perišić, Martina, "Economic Implications of Innovative Visual Guidance System for Crane Cabins" in Advances in Intelligent Systems and Computing, 1207 AISC (2020):133-139,
https://doi.org/10.1007/978-3-030-51369-6_18 . .

TY  - JOUR
AU  - Dondur, Nikola
AU  - Spasojević Brkić, Vesna
AU  - Brkić, Aleksandar
AU  - Perišić, Martina
PY  - 2020
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/3322
AB  - Brojna istraživanja u oblasti nesreća u kojima učestvuju dizalice ukazuju na činjenice da je rad rukovaoca/kraniste posao visokog rizika i da je uzrok nesreća i nezgoda najčešće ljudski faktor. Shodno tome, inovacije na polju unapređenja industrijske bezbednosti procesa u kojima učestvuju dizalice, u smislu pomoći kranisti da ne napravi grešku pri rukovanju, su preko potrebne. Projekat "SPRINCE" za rezultat ima inovativno rešenje sistema za vizuelno navođenje u realnom vremenu, u cilju rešavanja problema smanjene vidljivosti iz kranskih kabina. Ovaj rad analizira ekonomsku opravdanost sistema za vizuelno navođenje i na taj način povezuje ljudske, organizacione i tehničke faktore kroz pristup troškova i koristi. Analizirana su dva predložena scenarija: A) proizvodnja i prodaja kranskih kabina sa sistemom za vizuelno navođenje i B) upotreba (kupovina) kranske kabine sa sistemom za vizuelno navođenje. Tehno-ekonomska analiza pokazuje da su ekonomske koristi u oba scenarija tokom perioda korišćenja više puta veće od nabavne cene, dok je interna stopa prinosa više puta veća od prosečno ponderisane kamatne stope. Period povraćaja uloženih sredstava je manji od četiri godine. Takođe, oba projekta pripadaju kategoriji projekata niskog rizika.
AB  - Cranes' operations are extremely risky and hazardous tasks, as demonstrated in various surveys in the field of incidents' causes and effects. The most frequent cause of unsafe crane operation task execution is human error. Accordingly, innovation which enables cranes' safe operations, prevents "blind lifts" and helps crane operator to avoid potential error is urgent. Project SPRINCE has proposed computer-aided Visual Guidance System as a real time solution aimed to prevent crane accidents, caused by obstructed view. This paper analyses the economic feasibility of Visual Guidance System application in various scenarios in aim to connect human, technology and organization issues through cost-benefit framework. There are two proposed investment scenarios analysed: A) Producing and selling of crane cabins with real-time computer-aided Visual Guidance System and B) Usage (purchase) of crane cabins with real-time computer-aided Visual Guidance System. The economic appraisal has proved that the total economic benefit in both scenarios in the complete utilization period is several times higher than the buying price, while the internal rate of return is few times higher than the aggregate rate of interest paid. Also, the amount of time which takes to recover the cost of an investment is less than four years. Moreover, both scenarios belong to the category of innovation projects with very low risk.
PB  - Univerzitet u Beogradu - Tehnički fakultet u Boru, Beograd
T2  - Serbian Journal of Management
T1  - Ekonomska opravdanost kabina kranova opremljenih računarskim sistemom vizuelnog navođenja u realnom vremenu
T1  - The economic feasibility of crane cabins with real-time computer-aided visual guidance system
EP  - 43
IS  - 1
SP  - 33
VL  - 15
DO  - 10.5937/sjm15-24058
ER  - 

@article{
author = "Dondur, Nikola and Spasojević Brkić, Vesna and Brkić, Aleksandar and Perišić, Martina",
year = "2020",
abstract = "Brojna istraživanja u oblasti nesreća u kojima učestvuju dizalice ukazuju na činjenice da je rad rukovaoca/kraniste posao visokog rizika i da je uzrok nesreća i nezgoda najčešće ljudski faktor. Shodno tome, inovacije na polju unapređenja industrijske bezbednosti procesa u kojima učestvuju dizalice, u smislu pomoći kranisti da ne napravi grešku pri rukovanju, su preko potrebne. Projekat "SPRINCE" za rezultat ima inovativno rešenje sistema za vizuelno navođenje u realnom vremenu, u cilju rešavanja problema smanjene vidljivosti iz kranskih kabina. Ovaj rad analizira ekonomsku opravdanost sistema za vizuelno navođenje i na taj način povezuje ljudske, organizacione i tehničke faktore kroz pristup troškova i koristi. Analizirana su dva predložena scenarija: A) proizvodnja i prodaja kranskih kabina sa sistemom za vizuelno navođenje i B) upotreba (kupovina) kranske kabine sa sistemom za vizuelno navođenje. Tehno-ekonomska analiza pokazuje da su ekonomske koristi u oba scenarija tokom perioda korišćenja više puta veće od nabavne cene, dok je interna stopa prinosa više puta veća od prosečno ponderisane kamatne stope. Period povraćaja uloženih sredstava je manji od četiri godine. Takođe, oba projekta pripadaju kategoriji projekata niskog rizika., Cranes' operations are extremely risky and hazardous tasks, as demonstrated in various surveys in the field of incidents' causes and effects. The most frequent cause of unsafe crane operation task execution is human error. Accordingly, innovation which enables cranes' safe operations, prevents "blind lifts" and helps crane operator to avoid potential error is urgent. Project SPRINCE has proposed computer-aided Visual Guidance System as a real time solution aimed to prevent crane accidents, caused by obstructed view. This paper analyses the economic feasibility of Visual Guidance System application in various scenarios in aim to connect human, technology and organization issues through cost-benefit framework. There are two proposed investment scenarios analysed: A) Producing and selling of crane cabins with real-time computer-aided Visual Guidance System and B) Usage (purchase) of crane cabins with real-time computer-aided Visual Guidance System. The economic appraisal has proved that the total economic benefit in both scenarios in the complete utilization period is several times higher than the buying price, while the internal rate of return is few times higher than the aggregate rate of interest paid. Also, the amount of time which takes to recover the cost of an investment is less than four years. Moreover, both scenarios belong to the category of innovation projects with very low risk.",
publisher = "Univerzitet u Beogradu - Tehnički fakultet u Boru, Beograd",
journal = "Serbian Journal of Management",
title = "Ekonomska opravdanost kabina kranova opremljenih računarskim sistemom vizuelnog navođenja u realnom vremenu, The economic feasibility of crane cabins with real-time computer-aided visual guidance system",
pages = "43-33",
number = "1",
volume = "15",
doi = "10.5937/sjm15-24058"
}

Dondur, N., Spasojević Brkić, V., Brkić, A.,& Perišić, M.. (2020). Ekonomska opravdanost kabina kranova opremljenih računarskim sistemom vizuelnog navođenja u realnom vremenu. in Serbian Journal of Management
Univerzitet u Beogradu - Tehnički fakultet u Boru, Beograd., 15(1), 33-43.
https://doi.org/10.5937/sjm15-24058

Dondur N, Spasojević Brkić V, Brkić A, Perišić M. Ekonomska opravdanost kabina kranova opremljenih računarskim sistemom vizuelnog navođenja u realnom vremenu. in Serbian Journal of Management. 2020;15(1):33-43.
doi:10.5937/sjm15-24058 .

Dondur, Nikola, Spasojević Brkić, Vesna, Brkić, Aleksandar, Perišić, Martina, "Ekonomska opravdanost kabina kranova opremljenih računarskim sistemom vizuelnog navođenja u realnom vremenu" in Serbian Journal of Management, 15, no. 1 (2020):33-43,
https://doi.org/10.5937/sjm15-24058 . .

TY  - PAT
AU  - Spasojević Brkić, Vesna
AU  - Veljković, Zorica
AU  - Dondur, Nikola
PY  - 2020
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4411
AB  - The crane cabin chair according to the present invention provides comfortable position for an operator both in operating and non-operating regimen. The chair is characterized by ergonomically designed seat and leg support system, suitable for wide range of crane operators (including tall operators, which are the most vulnerable). Ergonomically designed chair has short length seat, with forward slope of 10°, adjustable horizontally and fixed on telescopic mechanism that enable vertical adjustment and the backrest with mechanisms that enable its' inclination and tilting. Leg support systems, containing two carrying, sliding and one supporting transparent frame, during work period is folded under the seat, and during the rest period simultaneously with backrest inclination could be extended to desired length in manner that operator is in lower risk of MSDs and has good vision field.
T1  - Ergonomically adapted crane cabins` chairs
IS  - WO 2020/149757 A1
UR  - https://hdl.handle.net/21.15107/rcub_machinery_4411
ER  - 

@misc{
author = "Spasojević Brkić, Vesna and Veljković, Zorica and Dondur, Nikola",
year = "2020",
abstract = "The crane cabin chair according to the present invention provides comfortable position for an operator both in operating and non-operating regimen. The chair is characterized by ergonomically designed seat and leg support system, suitable for wide range of crane operators (including tall operators, which are the most vulnerable). Ergonomically designed chair has short length seat, with forward slope of 10°, adjustable horizontally and fixed on telescopic mechanism that enable vertical adjustment and the backrest with mechanisms that enable its' inclination and tilting. Leg support systems, containing two carrying, sliding and one supporting transparent frame, during work period is folded under the seat, and during the rest period simultaneously with backrest inclination could be extended to desired length in manner that operator is in lower risk of MSDs and has good vision field.",
title = "Ergonomically adapted crane cabins` chairs",
number = "WO 2020/149757 A1",
url = "https://hdl.handle.net/21.15107/rcub_machinery_4411"
}

Spasojević Brkić, V., Veljković, Z.,& Dondur, N.. (2020). Ergonomically adapted crane cabins` chairs. (WO 2020/149757 A1).
https://hdl.handle.net/21.15107/rcub_machinery_4411

Spasojević Brkić V, Veljković Z, Dondur N. Ergonomically adapted crane cabins` chairs. 2020;(WO 2020/149757 A1).
https://hdl.handle.net/21.15107/rcub_machinery_4411 .

Spasojević Brkić, Vesna, Veljković, Zorica, Dondur, Nikola, "Ergonomically adapted crane cabins` chairs", no. WO 2020/149757 A1 (2020),
https://hdl.handle.net/21.15107/rcub_machinery_4411 .

TY  - JOUR
AU  - Josipović, Sonja
AU  - Spasojević Brkić, Vesna
AU  - Dondur, Nikola
PY  - 2019
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/3003
AB  - Predmet ovoga rada je sagledavanje značaja preduzetništva kao jednog od instrumenata transformisanja i oporavka lokalne ekonomije. U radu je dat pregled rezultata empirijskih istraživanja u čijoj osnovi je testiranje hipoteze o značajnoj povezanosti između obima preduzetničkih aktivnosti sa jedne strane i unapređenja ekonomskih performansi sa druge. Takođe, u radu je ukazano na faktore koji utiču na odluku pojedinca da postane preduzetnik i koji doprinose unapređenju preduzetničkih aktivnosti na regionalnom i lokalnom nivou. Poseban osvrt je dat na sagledavanju uloge pogodnosti ambijenta u unapređenju preduzetničkih aktivnosti na lokalnom nivou, posebno u zemljama u razvoju kao što je Srbija.
AB  - The subject of this paper is to examine the importance of entrepreneurship as one of the instruments of transformation and recovery of the local economy. The paper gives an overview of the results of empirical studies that are based on testing the hypothesis of a significant correlation between the volume of entrepreneurial activity on the one hand and the improvement of economic performance on the other. Also, the paper highlights the factors that influence an individual's decision to become an entrepreneur and which contribute to the promotion of the entrepreneurial activities at regional and local level. Particular attention is given to the consideration of the role of outdoor amenities in improving entrepreneurial activities at the local level, especially in developing countries like Serbia.
PB  - Savez inženjera i tehničara Srbije, Beograd
T2  - Tehnika
T1  - Značaj preduzetništva i analiza faktora koji doprinose unapređenju preduzetničkih aktivnosti
T1  - The importance of entrepreneurship and the analysis of the factors that foster entrepreneurial activities
EP  - 876
IS  - 6
SP  - 868
VL  - 74
DO  - 10.5937/tehnika1906868J
ER  - 

@article{
author = "Josipović, Sonja and Spasojević Brkić, Vesna and Dondur, Nikola",
year = "2019",
abstract = "Predmet ovoga rada je sagledavanje značaja preduzetništva kao jednog od instrumenata transformisanja i oporavka lokalne ekonomije. U radu je dat pregled rezultata empirijskih istraživanja u čijoj osnovi je testiranje hipoteze o značajnoj povezanosti između obima preduzetničkih aktivnosti sa jedne strane i unapređenja ekonomskih performansi sa druge. Takođe, u radu je ukazano na faktore koji utiču na odluku pojedinca da postane preduzetnik i koji doprinose unapređenju preduzetničkih aktivnosti na regionalnom i lokalnom nivou. Poseban osvrt je dat na sagledavanju uloge pogodnosti ambijenta u unapređenju preduzetničkih aktivnosti na lokalnom nivou, posebno u zemljama u razvoju kao što je Srbija., The subject of this paper is to examine the importance of entrepreneurship as one of the instruments of transformation and recovery of the local economy. The paper gives an overview of the results of empirical studies that are based on testing the hypothesis of a significant correlation between the volume of entrepreneurial activity on the one hand and the improvement of economic performance on the other. Also, the paper highlights the factors that influence an individual's decision to become an entrepreneur and which contribute to the promotion of the entrepreneurial activities at regional and local level. Particular attention is given to the consideration of the role of outdoor amenities in improving entrepreneurial activities at the local level, especially in developing countries like Serbia.",
publisher = "Savez inženjera i tehničara Srbije, Beograd",
journal = "Tehnika",
title = "Značaj preduzetništva i analiza faktora koji doprinose unapređenju preduzetničkih aktivnosti, The importance of entrepreneurship and the analysis of the factors that foster entrepreneurial activities",
pages = "876-868",
number = "6",
volume = "74",
doi = "10.5937/tehnika1906868J"
}

Josipović, S., Spasojević Brkić, V.,& Dondur, N.. (2019). Značaj preduzetništva i analiza faktora koji doprinose unapređenju preduzetničkih aktivnosti. in Tehnika
Savez inženjera i tehničara Srbije, Beograd., 74(6), 868-876.
https://doi.org/10.5937/tehnika1906868J

Josipović S, Spasojević Brkić V, Dondur N. Značaj preduzetništva i analiza faktora koji doprinose unapređenju preduzetničkih aktivnosti. in Tehnika. 2019;74(6):868-876.
doi:10.5937/tehnika1906868J .

Josipović, Sonja, Spasojević Brkić, Vesna, Dondur, Nikola, "Značaj preduzetništva i analiza faktora koji doprinose unapređenju preduzetničkih aktivnosti" in Tehnika, 74, no. 6 (2019):868-876,
https://doi.org/10.5937/tehnika1906868J . .

TY  - JOUR
AU  - Spasojević Brkić, Vesna
AU  - Tomić, Branislav
AU  - Brkić, Aleksandar
AU  - Dondur, Nikola
AU  - Josipović, Sonja
PY  - 2019
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/3019
AB  - Organizaciona kultura je organizaciona paradigma nastala kao posledica ograničenosti racionalnih metoda u tumačenju organizacione stvarnosti. Predmet ovoga rada je sagledavanje različitih dimenzija organizacione kulture na primeru multinacionalnih preduzeća. Nakon detaljnog pregleda raspoložive literature, u radu su dimenzije organizacione kulture analizirane na uzorku 200 proizvodnih preduzeća koja su deo lanca snabdevanja velike multinacionalne kompanije. Prema rezultatima sprovedenog empirijskog istraživanja dominantne dimenzije organizacione kulture multinacionalnih preduzeća su: upravljanje rizikom, razvijena komunikacija u organizaciji, postavljanje merljivih ciljeva i zadataka, posedovanje razvijenog formalizovanog sistema procedura i njihova upotreba, primena sistema nagrađivanja, rešavanja konflikata u organizaciji, ulaganje u znanje i kompetentnost zaposlenih i njihovo redovno unapređivanje i razvitak.
AB  - Organizational culture is a consequence of the limitations of rational methods in interpreting organizational reality. The subject of this paper is to analyze different dimensions of organizational culture, with special emphasis on multinational companies. After a detailed overview of the available literature, the dimensions of the organizational culture were tested on a sample of 200 manufacturing companies that are part of the supply chain of a large multinational company. According to the results of the conducted empirical research, the dominant dimensions of organizational culture are risk management, developed communication in the organization, setting measurable objectives and tasks, possessing a developed formalized system of procedures and their use, applying reward system, solving conflicts in the organization, investing in knowledge and competence of employees and their regular improvement and development.
PB  - Savez inženjera i tehničara Srbije, Beograd
T2  - Tehnika
T1  - Dimenzije organizacione kulture u multinacionalnim preduzećima
T1  - Dimensions of organizational culture in multinational enterprises
EP  - 286
IS  - 2
SP  - 279
VL  - 74
DO  - 10.5937/tehnika1902279S
ER  - 

@article{
author = "Spasojević Brkić, Vesna and Tomić, Branislav and Brkić, Aleksandar and Dondur, Nikola and Josipović, Sonja",
year = "2019",
abstract = "Organizaciona kultura je organizaciona paradigma nastala kao posledica ograničenosti racionalnih metoda u tumačenju organizacione stvarnosti. Predmet ovoga rada je sagledavanje različitih dimenzija organizacione kulture na primeru multinacionalnih preduzeća. Nakon detaljnog pregleda raspoložive literature, u radu su dimenzije organizacione kulture analizirane na uzorku 200 proizvodnih preduzeća koja su deo lanca snabdevanja velike multinacionalne kompanije. Prema rezultatima sprovedenog empirijskog istraživanja dominantne dimenzije organizacione kulture multinacionalnih preduzeća su: upravljanje rizikom, razvijena komunikacija u organizaciji, postavljanje merljivih ciljeva i zadataka, posedovanje razvijenog formalizovanog sistema procedura i njihova upotreba, primena sistema nagrađivanja, rešavanja konflikata u organizaciji, ulaganje u znanje i kompetentnost zaposlenih i njihovo redovno unapređivanje i razvitak., Organizational culture is a consequence of the limitations of rational methods in interpreting organizational reality. The subject of this paper is to analyze different dimensions of organizational culture, with special emphasis on multinational companies. After a detailed overview of the available literature, the dimensions of the organizational culture were tested on a sample of 200 manufacturing companies that are part of the supply chain of a large multinational company. According to the results of the conducted empirical research, the dominant dimensions of organizational culture are risk management, developed communication in the organization, setting measurable objectives and tasks, possessing a developed formalized system of procedures and their use, applying reward system, solving conflicts in the organization, investing in knowledge and competence of employees and their regular improvement and development.",
publisher = "Savez inženjera i tehničara Srbije, Beograd",
journal = "Tehnika",
title = "Dimenzije organizacione kulture u multinacionalnim preduzećima, Dimensions of organizational culture in multinational enterprises",
pages = "286-279",
number = "2",
volume = "74",
doi = "10.5937/tehnika1902279S"
}

Spasojević Brkić, V., Tomić, B., Brkić, A., Dondur, N.,& Josipović, S.. (2019). Dimenzije organizacione kulture u multinacionalnim preduzećima. in Tehnika
Savez inženjera i tehničara Srbije, Beograd., 74(2), 279-286.
https://doi.org/10.5937/tehnika1902279S

Spasojević Brkić V, Tomić B, Brkić A, Dondur N, Josipović S. Dimenzije organizacione kulture u multinacionalnim preduzećima. in Tehnika. 2019;74(2):279-286.
doi:10.5937/tehnika1902279S .

Spasojević Brkić, Vesna, Tomić, Branislav, Brkić, Aleksandar, Dondur, Nikola, Josipović, Sonja, "Dimenzije organizacione kulture u multinacionalnim preduzećima" in Tehnika, 74, no. 2 (2019):279-286,
https://doi.org/10.5937/tehnika1902279S . .

TY  - JOUR
AU  - Spasojević Brkić, Vesna
AU  - Dondur, Nikola
AU  - Klarin, Milivoj
AU  - Golubović, Tamara
PY  - 2016
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/2373
AB  - Quality management (QM) programme often is not a measure of high organisational effectiveness and business performances, so it is of interest to explore the relation between QM critical factors and total factor productivity (TFP). In this study the data were collected in the period 2004-2009 from Serbian industrial firms certified according to ISO 9000 with a total number of 176 observations. In order to determine the total factor productivity through the production function variables describing the dependence of added value and labour and capital factors of production were used. For the QM data, the results underwent factor analysis and reliability calculations so as to be used as independent variables in multiple regressions. The key result of this study is the confirmation of the hypothesis, that firms having above average score for a certain QM factor register statistically significant positive and negative differences in TFP, against average productivity of all firms in the sample.
PB  - Inderscience Publishers
T2  - International Journal of Business Excellence
T1  - Effectiveness of quality management factors and differences in total factor productivity
EP  - 309
IS  - 3
SP  - 293
VL  - 9
DO  - 10.1504/IJBEX.2016.075593
ER  - 

@article{
author = "Spasojević Brkić, Vesna and Dondur, Nikola and Klarin, Milivoj and Golubović, Tamara",
year = "2016",
abstract = "Quality management (QM) programme often is not a measure of high organisational effectiveness and business performances, so it is of interest to explore the relation between QM critical factors and total factor productivity (TFP). In this study the data were collected in the period 2004-2009 from Serbian industrial firms certified according to ISO 9000 with a total number of 176 observations. In order to determine the total factor productivity through the production function variables describing the dependence of added value and labour and capital factors of production were used. For the QM data, the results underwent factor analysis and reliability calculations so as to be used as independent variables in multiple regressions. The key result of this study is the confirmation of the hypothesis, that firms having above average score for a certain QM factor register statistically significant positive and negative differences in TFP, against average productivity of all firms in the sample.",
publisher = "Inderscience Publishers",
journal = "International Journal of Business Excellence",
title = "Effectiveness of quality management factors and differences in total factor productivity",
pages = "309-293",
number = "3",
volume = "9",
doi = "10.1504/IJBEX.2016.075593"
}

Spasojević Brkić, V., Dondur, N., Klarin, M.,& Golubović, T.. (2016). Effectiveness of quality management factors and differences in total factor productivity. in International Journal of Business Excellence
Inderscience Publishers., 9(3), 293-309.
https://doi.org/10.1504/IJBEX.2016.075593

Spasojević Brkić V, Dondur N, Klarin M, Golubović T. Effectiveness of quality management factors and differences in total factor productivity. in International Journal of Business Excellence. 2016;9(3):293-309.
doi:10.1504/IJBEX.2016.075593 .

Spasojević Brkić, Vesna, Dondur, Nikola, Klarin, Milivoj, Golubović, Tamara, "Effectiveness of quality management factors and differences in total factor productivity" in International Journal of Business Excellence, 9, no. 3 (2016):293-309,
https://doi.org/10.1504/IJBEX.2016.075593 . .

TY  - JOUR
AU  - Dondur, Nikola
AU  - Jovović, Aleksandar
AU  - Spasojević Brkić, Vesna
AU  - Radić, Dejan
AU  - Obradović, Marko
AU  - Todorović, Dušan
AU  - Josipović, Sonja
AU  - Stanojević, Miroslav
PY  - 2015
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/2171
AB  - In the paper we have analysed whether and to what extent co-incineration of secondary fuels in cement manufacturing is cost-effective. Techno-economic assessment shows that combined combustion of solid recovered fuel and traditional fossil fuel (petroleum coke) is economically viable to the extent of 20:80 per cent. The paper also concluded that the impact of the plants on the quality of air would be negligible.
PB  - Institut za istraživanja i projektovanja u privredi, Beograd
T2  - Journal of Applied Engineering Science
T1  - Use of solid recovered fuel (SRF) in cement industry: Economic and environmental implications
EP  - 315
IS  - 4
SP  - 307
VL  - 13
DO  - 10.5937/jaes13-9574
ER  - 

@article{
author = "Dondur, Nikola and Jovović, Aleksandar and Spasojević Brkić, Vesna and Radić, Dejan and Obradović, Marko and Todorović, Dušan and Josipović, Sonja and Stanojević, Miroslav",
year = "2015",
abstract = "In the paper we have analysed whether and to what extent co-incineration of secondary fuels in cement manufacturing is cost-effective. Techno-economic assessment shows that combined combustion of solid recovered fuel and traditional fossil fuel (petroleum coke) is economically viable to the extent of 20:80 per cent. The paper also concluded that the impact of the plants on the quality of air would be negligible.",
publisher = "Institut za istraživanja i projektovanja u privredi, Beograd",
journal = "Journal of Applied Engineering Science",
title = "Use of solid recovered fuel (SRF) in cement industry: Economic and environmental implications",
pages = "315-307",
number = "4",
volume = "13",
doi = "10.5937/jaes13-9574"
}

Dondur, N., Jovović, A., Spasojević Brkić, V., Radić, D., Obradović, M., Todorović, D., Josipović, S.,& Stanojević, M.. (2015). Use of solid recovered fuel (SRF) in cement industry: Economic and environmental implications. in Journal of Applied Engineering Science
Institut za istraživanja i projektovanja u privredi, Beograd., 13(4), 307-315.
https://doi.org/10.5937/jaes13-9574

Dondur N, Jovović A, Spasojević Brkić V, Radić D, Obradović M, Todorović D, Josipović S, Stanojević M. Use of solid recovered fuel (SRF) in cement industry: Economic and environmental implications. in Journal of Applied Engineering Science. 2015;13(4):307-315.
doi:10.5937/jaes13-9574 .

Dondur, Nikola, Jovović, Aleksandar, Spasojević Brkić, Vesna, Radić, Dejan, Obradović, Marko, Todorović, Dušan, Josipović, Sonja, Stanojević, Miroslav, "Use of solid recovered fuel (SRF) in cement industry: Economic and environmental implications" in Journal of Applied Engineering Science, 13, no. 4 (2015):307-315,
https://doi.org/10.5937/jaes13-9574 . .

TY  - JOUR
AU  - Spasojević Brkić, Vesna
AU  - Djurdjević, T.
AU  - Dondur, Nikola
AU  - Klarin, Milivoj
AU  - Tomić, Branislav
PY  - 2013
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1683
AB  - This study empirically examines the impact of quality tools on business performance in a sample of 119 Serbian industrial firms. Quality tools are classified into three primary groups according to their usage pattern by means of factor analysis and reliability testing: quality tools for reviewing current conditions, for analysing current conditions and for production planning and control. The relationships between these groups of quality tools and business performance measures were tested using stepwise regression analysis. Quality tools for reviewing current conditions have a significantly positive impact on most business performance dimensions, which is to be expected due to the fact that Serbia is in the phase between quality assurance and total quality management. Quality tools for analysing current conditions significantly influence productivity, while those for improvement have a positive effect on capacity expansion as a development performance measure.
PB  - Routledge Journals, Taylor & Francis Ltd, Abingdon
T2  - Total Quality Management & Business Excellence
T1  - An empirical examination of the impact of quality tools application on business performance: Evidence from Serbia
EP  - 618
IS  - 5-6
SP  - 607
VL  - 24
DO  - 10.1080/14783363.2012.677306
ER  - 

@article{
author = "Spasojević Brkić, Vesna and Djurdjević, T. and Dondur, Nikola and Klarin, Milivoj and Tomić, Branislav",
year = "2013",
abstract = "This study empirically examines the impact of quality tools on business performance in a sample of 119 Serbian industrial firms. Quality tools are classified into three primary groups according to their usage pattern by means of factor analysis and reliability testing: quality tools for reviewing current conditions, for analysing current conditions and for production planning and control. The relationships between these groups of quality tools and business performance measures were tested using stepwise regression analysis. Quality tools for reviewing current conditions have a significantly positive impact on most business performance dimensions, which is to be expected due to the fact that Serbia is in the phase between quality assurance and total quality management. Quality tools for analysing current conditions significantly influence productivity, while those for improvement have a positive effect on capacity expansion as a development performance measure.",
publisher = "Routledge Journals, Taylor & Francis Ltd, Abingdon",
journal = "Total Quality Management & Business Excellence",
title = "An empirical examination of the impact of quality tools application on business performance: Evidence from Serbia",
pages = "618-607",
number = "5-6",
volume = "24",
doi = "10.1080/14783363.2012.677306"
}

Spasojević Brkić, V., Djurdjević, T., Dondur, N., Klarin, M.,& Tomić, B.. (2013). An empirical examination of the impact of quality tools application on business performance: Evidence from Serbia. in Total Quality Management & Business Excellence
Routledge Journals, Taylor & Francis Ltd, Abingdon., 24(5-6), 607-618.
https://doi.org/10.1080/14783363.2012.677306

Spasojević Brkić V, Djurdjević T, Dondur N, Klarin M, Tomić B. An empirical examination of the impact of quality tools application on business performance: Evidence from Serbia. in Total Quality Management & Business Excellence. 2013;24(5-6):607-618.
doi:10.1080/14783363.2012.677306 .

Spasojević Brkić, Vesna, Djurdjević, T., Dondur, Nikola, Klarin, Milivoj, Tomić, Branislav, "An empirical examination of the impact of quality tools application on business performance: Evidence from Serbia" in Total Quality Management & Business Excellence, 24, no. 5-6 (2013):607-618,
https://doi.org/10.1080/14783363.2012.677306 . .

TY  - JOUR
AU  - Dondur, Nikola
AU  - Spasojević Brkić, Vesna
AU  - Omić, Snežana
AU  - Milović, Ljubica
AU  - Sedmak, Tamara
PY  - 2012
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1607
AB  - Differences in total factor productivity of privatised and newly-founded private companies in Serbia are empirically estimated in this paper. On the panel data from a sample of 900 firms in three regions - Vojvodina, Central Serbia and Belgrade, it is found that majority foreign owned companies, as well as export-oriented and newly-founded businesses which did not undergo the process of ownership transformation recorded higher productivity than the average productivity in these regions. Regional inequality in companies' performance elasticity to foreign capital, exports and market concentration is also empirically proved.
T2  - Metalurgia International
T1  - Productivity after ownership transformation-Serbian case
EP  - 57
IS  - 6
SP  - 50
VL  - 17
UR  - https://hdl.handle.net/21.15107/rcub_technorep_1995
ER  - 

@article{
author = "Dondur, Nikola and Spasojević Brkić, Vesna and Omić, Snežana and Milović, Ljubica and Sedmak, Tamara",
year = "2012",
abstract = "Differences in total factor productivity of privatised and newly-founded private companies in Serbia are empirically estimated in this paper. On the panel data from a sample of 900 firms in three regions - Vojvodina, Central Serbia and Belgrade, it is found that majority foreign owned companies, as well as export-oriented and newly-founded businesses which did not undergo the process of ownership transformation recorded higher productivity than the average productivity in these regions. Regional inequality in companies' performance elasticity to foreign capital, exports and market concentration is also empirically proved.",
journal = "Metalurgia International",
title = "Productivity after ownership transformation-Serbian case",
pages = "57-50",
number = "6",
volume = "17",
url = "https://hdl.handle.net/21.15107/rcub_technorep_1995"
}

Dondur, N., Spasojević Brkić, V., Omić, S., Milović, L.,& Sedmak, T.. (2012). Productivity after ownership transformation-Serbian case. in Metalurgia International, 17(6), 50-57.
https://hdl.handle.net/21.15107/rcub_technorep_1995

Dondur N, Spasojević Brkić V, Omić S, Milović L, Sedmak T. Productivity after ownership transformation-Serbian case. in Metalurgia International. 2012;17(6):50-57.
https://hdl.handle.net/21.15107/rcub_technorep_1995 .

Dondur, Nikola, Spasojević Brkić, Vesna, Omić, Snežana, Milović, Ljubica, Sedmak, Tamara, "Productivity after ownership transformation-Serbian case" in Metalurgia International, 17, no. 6 (2012):50-57,
https://hdl.handle.net/21.15107/rcub_technorep_1995 .

TY  - JOUR
AU  - Spasojević Brkić, Vesna
AU  - Pokrajac, Slobodan
AU  - Dondur, Nikola
AU  - Josipović, Sonja
PY  - 2012
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1463
AB  - Trendovi alokativne efikasnosti i kovarijati veličine preduzeća i efikasnosti faktora menadžmenta kvalitetom u srpskoj industriji su testirani na nebalansiranom panel uzorku od 48 industrijskih preduzeća iz 12 industrijskih sektora u periodu 2004-2009. Dobijeni rezultati pokazuju da 10 od 12 sektora ima pozitivan kovarijat učešća u outputu tržišta i multi-faktorskoj produktivnosti. Kovarijat veličine preduzeća i efikasnosti svih faktora menadžmenta kvalitetom pokazuju isti smer u hemijskom sektoru (pozitivno) i sektoru motornih vozila (negativno), što znači da u ta dva sektora veće kompanije imaju natprosečnu i/ili ispodprosečnu efikasnost menadžmenta kvalitetom. Isti (pozitivan) trend alokativne efikasnosti i kovarijata svih faktora menadžmenta kvalitetom je zabeležen u hemijskoj industriji.
AB  - Trends of allocative efficiency and covariate of firm size and efficiency of quality management(QM) factors in the Serbian industry were tested on the unbalanced panel sample of 48 industrial firms from 12 industrial sectors in the period 2004-2009. The obtained results show that 10 of 12 sectors have a positive covariate of participation in the output market and multi-factor productivity. Covariates of firm size and efficiency of all QM factors record the same direction in the chemicals sector (positive) and motor vehicles (negative), which means that in those two sectors larger companies had above-average and/or below-average efficient TQM. The same (positive) trend of allocative efficiency and covariates of all QM factors was recorded in manufacture of chemical industry.
PB  - Institut za istraživanja i projektovanja u privredi, Beograd
T2  - Journal of Applied Engineering Science
T1  - Alokativna efikasnost i kovarijantni faktori menadžmenta kvalitetom u srpskoj industriji
T1  - Allocative efficiency and QM factors covariate in Serbian industry
EP  - 225
IS  - 4
SP  - 221
VL  - 10
DO  - 10.5937/jaes10-2517
ER  - 

@article{
author = "Spasojević Brkić, Vesna and Pokrajac, Slobodan and Dondur, Nikola and Josipović, Sonja",
year = "2012",
abstract = "Trendovi alokativne efikasnosti i kovarijati veličine preduzeća i efikasnosti faktora menadžmenta kvalitetom u srpskoj industriji su testirani na nebalansiranom panel uzorku od 48 industrijskih preduzeća iz 12 industrijskih sektora u periodu 2004-2009. Dobijeni rezultati pokazuju da 10 od 12 sektora ima pozitivan kovarijat učešća u outputu tržišta i multi-faktorskoj produktivnosti. Kovarijat veličine preduzeća i efikasnosti svih faktora menadžmenta kvalitetom pokazuju isti smer u hemijskom sektoru (pozitivno) i sektoru motornih vozila (negativno), što znači da u ta dva sektora veće kompanije imaju natprosečnu i/ili ispodprosečnu efikasnost menadžmenta kvalitetom. Isti (pozitivan) trend alokativne efikasnosti i kovarijata svih faktora menadžmenta kvalitetom je zabeležen u hemijskoj industriji., Trends of allocative efficiency and covariate of firm size and efficiency of quality management(QM) factors in the Serbian industry were tested on the unbalanced panel sample of 48 industrial firms from 12 industrial sectors in the period 2004-2009. The obtained results show that 10 of 12 sectors have a positive covariate of participation in the output market and multi-factor productivity. Covariates of firm size and efficiency of all QM factors record the same direction in the chemicals sector (positive) and motor vehicles (negative), which means that in those two sectors larger companies had above-average and/or below-average efficient TQM. The same (positive) trend of allocative efficiency and covariates of all QM factors was recorded in manufacture of chemical industry.",
publisher = "Institut za istraživanja i projektovanja u privredi, Beograd",
journal = "Journal of Applied Engineering Science",
title = "Alokativna efikasnost i kovarijantni faktori menadžmenta kvalitetom u srpskoj industriji, Allocative efficiency and QM factors covariate in Serbian industry",
pages = "225-221",
number = "4",
volume = "10",
doi = "10.5937/jaes10-2517"
}

Spasojević Brkić, V., Pokrajac, S., Dondur, N.,& Josipović, S.. (2012). Alokativna efikasnost i kovarijantni faktori menadžmenta kvalitetom u srpskoj industriji. in Journal of Applied Engineering Science
Institut za istraživanja i projektovanja u privredi, Beograd., 10(4), 221-225.
https://doi.org/10.5937/jaes10-2517

Spasojević Brkić V, Pokrajac S, Dondur N, Josipović S. Alokativna efikasnost i kovarijantni faktori menadžmenta kvalitetom u srpskoj industriji. in Journal of Applied Engineering Science. 2012;10(4):221-225.
doi:10.5937/jaes10-2517 .

Spasojević Brkić, Vesna, Pokrajac, Slobodan, Dondur, Nikola, Josipović, Sonja, "Alokativna efikasnost i kovarijantni faktori menadžmenta kvalitetom u srpskoj industriji" in Journal of Applied Engineering Science, 10, no. 4 (2012):221-225,
https://doi.org/10.5937/jaes10-2517 . .

TY  - JOUR
AU  - Spasojević Brkić, Vesna
AU  - Đurđević, Tijana
AU  - Omić, Snežana
AU  - Klarin, Milivoj
AU  - Dondur, Nikola
PY  - 2012
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1417
AB  - Ova studija istražuje uticaj alata kvaliteta na finansijske pokazatelje, pri istraživanju na uzorku od 119 Srpskih industrijskih preduzeća. Faktorskom analizom i analizom pouzdanosti dokazano je da se alati kvaliteta mogu klasifikovati u tri primarne kategorije: alati kvaliteta za pregled trenutnih uslova (za odlučivanje), alati kvaliteta za analizu trenutnih uslova (za rešavanje problema) i alati kvaliteta za planiranje proizvodnje i kontrolu (za unapređenje). Odnosi između ove 3 grupe alata kvaliteta i finansijskih pokazatelja testirani su upotrebom 'stepwise' regresione analize. Zaključeno je da prva grupa alata kvaliteta (za odlučivanje) ima značajni uticaj na većinu dimenzija finansijskih performansi, dok druga i treća grupa nemaju statističku značajnost. Uticaj prve grupe alata kvaliteta na prihod od prodaje je sa nivoom statističke značajnosti p lt 0.01 dok je njen uticaj na profit kompanije i ukupne prihode po zaposlenom statističkog značaja p lt 0.05. Konzistencija modela je bila u rangu 4% do 7%.
AB  - This study examines the impact of quality tools on financial performances using a sample of 119 Serbian industrial firms. Factor and reliability analysis are used to show that quality tools may be classified into three primary categories: quality tools for reviewing current conditions (for decision making), quality tools for analyzing current conditions (for problems solving) and quality tools for production planning and control (for improvement). The relationships between these 3 groups of quality tools and financial performances were tested using the stepwise regression analysis. It was concluded that the first group of quality tools (quality tools for reviewing current condition, e.g. for decision making) has significant impact on most of the dimensions of financial performances, while for the second and third group there is no statistical support. Influence of the first group of quality tools on sales revenue is statistically significant at a p lt 0.01 significance level while it's influence on company profit and total revenue per employee are statistically significant at p lt 0.05 significance level. The model ranged from 4% to 7%.
PB  - Univerzitet u Beogradu - Tehnički fakultet u Boru, Beograd
T2  - Serbian Journal of Management
T1  - Empirijsko istraživanje uticaja alata kvaliteta na finansijske pokazatelje - primer iz Srbije
T1  - An empirical examination of quality tools impact on financial performances: Evidence from Serbia
EP  - 87
IS  - 1
SP  - 77
VL  - 7
DO  - 10.5937/sjm1201077S
ER  - 

@article{
author = "Spasojević Brkić, Vesna and Đurđević, Tijana and Omić, Snežana and Klarin, Milivoj and Dondur, Nikola",
year = "2012",
abstract = "Ova studija istražuje uticaj alata kvaliteta na finansijske pokazatelje, pri istraživanju na uzorku od 119 Srpskih industrijskih preduzeća. Faktorskom analizom i analizom pouzdanosti dokazano je da se alati kvaliteta mogu klasifikovati u tri primarne kategorije: alati kvaliteta za pregled trenutnih uslova (za odlučivanje), alati kvaliteta za analizu trenutnih uslova (za rešavanje problema) i alati kvaliteta za planiranje proizvodnje i kontrolu (za unapređenje). Odnosi između ove 3 grupe alata kvaliteta i finansijskih pokazatelja testirani su upotrebom 'stepwise' regresione analize. Zaključeno je da prva grupa alata kvaliteta (za odlučivanje) ima značajni uticaj na većinu dimenzija finansijskih performansi, dok druga i treća grupa nemaju statističku značajnost. Uticaj prve grupe alata kvaliteta na prihod od prodaje je sa nivoom statističke značajnosti p lt 0.01 dok je njen uticaj na profit kompanije i ukupne prihode po zaposlenom statističkog značaja p lt 0.05. Konzistencija modela je bila u rangu 4% do 7%., This study examines the impact of quality tools on financial performances using a sample of 119 Serbian industrial firms. Factor and reliability analysis are used to show that quality tools may be classified into three primary categories: quality tools for reviewing current conditions (for decision making), quality tools for analyzing current conditions (for problems solving) and quality tools for production planning and control (for improvement). The relationships between these 3 groups of quality tools and financial performances were tested using the stepwise regression analysis. It was concluded that the first group of quality tools (quality tools for reviewing current condition, e.g. for decision making) has significant impact on most of the dimensions of financial performances, while for the second and third group there is no statistical support. Influence of the first group of quality tools on sales revenue is statistically significant at a p lt 0.01 significance level while it's influence on company profit and total revenue per employee are statistically significant at p lt 0.05 significance level. The model ranged from 4% to 7%.",
publisher = "Univerzitet u Beogradu - Tehnički fakultet u Boru, Beograd",
journal = "Serbian Journal of Management",
title = "Empirijsko istraživanje uticaja alata kvaliteta na finansijske pokazatelje - primer iz Srbije, An empirical examination of quality tools impact on financial performances: Evidence from Serbia",
pages = "87-77",
number = "1",
volume = "7",
doi = "10.5937/sjm1201077S"
}

Spasojević Brkić, V., Đurđević, T., Omić, S., Klarin, M.,& Dondur, N.. (2012). Empirijsko istraživanje uticaja alata kvaliteta na finansijske pokazatelje - primer iz Srbije. in Serbian Journal of Management
Univerzitet u Beogradu - Tehnički fakultet u Boru, Beograd., 7(1), 77-87.
https://doi.org/10.5937/sjm1201077S

Spasojević Brkić V, Đurđević T, Omić S, Klarin M, Dondur N. Empirijsko istraživanje uticaja alata kvaliteta na finansijske pokazatelje - primer iz Srbije. in Serbian Journal of Management. 2012;7(1):77-87.
doi:10.5937/sjm1201077S .

Spasojević Brkić, Vesna, Đurđević, Tijana, Omić, Snežana, Klarin, Milivoj, Dondur, Nikola, "Empirijsko istraživanje uticaja alata kvaliteta na finansijske pokazatelje - primer iz Srbije" in Serbian Journal of Management, 7, no. 1 (2012):77-87,
https://doi.org/10.5937/sjm1201077S . .

TY  - JOUR
AU  - Dondur, Nikola
AU  - Spasojević Brkić, Vesna
AU  - Brkić, Aleksandar
PY  - 2012
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1462
AB  - Rad analizira ekonomsku opravdanost i upotrebu nove generacije kabina krana znatno manje težine i krutosti čiji će unutrašnji prostor neophodan za rukovaoca biti razvijen korišćenjem metode fizičkog, kognitivnog i ergonomskog organizovanja sa rešenim problemom vidljivosti i koji će omogućiti veću produktivnost, usled smanjenja fizičkog i psihičkog stresa rukovaoca, kao i veću bezbednost i sigurnost usled integrisanja vizuelnog sistema. Dokazano je da ukupna ekonomska prednost eksploatacije kabine u ukupnom eksploatacijskom period značajno veća, nego upotrebna cena kabine, kao i da je interna stopa prinosa iznad prosečne ponderisane kamatne stope i da je vreme povratka uloženog manje od 3 godine. Analizirani proizvodni projekat i upotreba kabine krana sa integrisanim vizuelnim sistemom za detekciju i interpretaciju sredine je projekat niskog ekonomskog rizika.
AB  - This paper analyses the economic feasibility of production and use of the new generation crane cabins of considerably lighter weight and stiff structure whose interior space necessary for the operator will be developed by using the methods of physical, cognitive and organizational ergonomics with the solved problem of visibility and which will allow higher productivity due to reduction of physical and psychological stress of the operator, as well as greater safety and security due to the integrated visual system. It is proved that the total economic benefit of the exploitation of the cabin in the overall exploitation period is significantly higher than the purchase price of the cabin, as well as that the internal rate of return is above the relevant average weighted interest rate and the payback period is less than three years. The analyzed project of production and use of crane cabins with integrated visual systems for the detection and interpretation of environment is the project with low economic risk.
PB  - Institut za istraživanja i projektovanja u privredi, Beograd
T2  - Journal of Applied Engineering Science
T1  - Kabine krana sa integrisanim vizuelnim sistemom za detekciju i interprentaciju ekonomske procene sredine
T1  - Crane cabins with integrated visual systems for the detection and interpretation of environment - economic appraisal
EP  - 196
IS  - 4
SP  - 191
VL  - 10
DO  - 10.5937/jaes10-2516
ER  - 

@article{
author = "Dondur, Nikola and Spasojević Brkić, Vesna and Brkić, Aleksandar",
year = "2012",
abstract = "Rad analizira ekonomsku opravdanost i upotrebu nove generacije kabina krana znatno manje težine i krutosti čiji će unutrašnji prostor neophodan za rukovaoca biti razvijen korišćenjem metode fizičkog, kognitivnog i ergonomskog organizovanja sa rešenim problemom vidljivosti i koji će omogućiti veću produktivnost, usled smanjenja fizičkog i psihičkog stresa rukovaoca, kao i veću bezbednost i sigurnost usled integrisanja vizuelnog sistema. Dokazano je da ukupna ekonomska prednost eksploatacije kabine u ukupnom eksploatacijskom period značajno veća, nego upotrebna cena kabine, kao i da je interna stopa prinosa iznad prosečne ponderisane kamatne stope i da je vreme povratka uloženog manje od 3 godine. Analizirani proizvodni projekat i upotreba kabine krana sa integrisanim vizuelnim sistemom za detekciju i interpretaciju sredine je projekat niskog ekonomskog rizika., This paper analyses the economic feasibility of production and use of the new generation crane cabins of considerably lighter weight and stiff structure whose interior space necessary for the operator will be developed by using the methods of physical, cognitive and organizational ergonomics with the solved problem of visibility and which will allow higher productivity due to reduction of physical and psychological stress of the operator, as well as greater safety and security due to the integrated visual system. It is proved that the total economic benefit of the exploitation of the cabin in the overall exploitation period is significantly higher than the purchase price of the cabin, as well as that the internal rate of return is above the relevant average weighted interest rate and the payback period is less than three years. The analyzed project of production and use of crane cabins with integrated visual systems for the detection and interpretation of environment is the project with low economic risk.",
publisher = "Institut za istraživanja i projektovanja u privredi, Beograd",
journal = "Journal of Applied Engineering Science",
title = "Kabine krana sa integrisanim vizuelnim sistemom za detekciju i interprentaciju ekonomske procene sredine, Crane cabins with integrated visual systems for the detection and interpretation of environment - economic appraisal",
pages = "196-191",
number = "4",
volume = "10",
doi = "10.5937/jaes10-2516"
}

Dondur, N., Spasojević Brkić, V.,& Brkić, A.. (2012). Kabine krana sa integrisanim vizuelnim sistemom za detekciju i interprentaciju ekonomske procene sredine. in Journal of Applied Engineering Science
Institut za istraživanja i projektovanja u privredi, Beograd., 10(4), 191-196.
https://doi.org/10.5937/jaes10-2516

Dondur N, Spasojević Brkić V, Brkić A. Kabine krana sa integrisanim vizuelnim sistemom za detekciju i interprentaciju ekonomske procene sredine. in Journal of Applied Engineering Science. 2012;10(4):191-196.
doi:10.5937/jaes10-2516 .

Dondur, Nikola, Spasojević Brkić, Vesna, Brkić, Aleksandar, "Kabine krana sa integrisanim vizuelnim sistemom za detekciju i interprentaciju ekonomske procene sredine" in Journal of Applied Engineering Science, 10, no. 4 (2012):191-196,
https://doi.org/10.5937/jaes10-2516 . .

TY  - CONF
AU  - Milović, Ljubica
AU  - Manjgo, Mersida
AU  - Anđelić, Nina
AU  - Milošević-Mitić, Vesna
AU  - Jeli, Zorana
AU  - Dondur, Nikola
PY  - 2011
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/5967
AB  - An investigation has been carried out into the behaviour of type IV cracks region in heat affected zone 
(HAZ) of P91 steel at 600°C. Microstructure zones where type IV failures may occur have been 
studied in details. Results are reported on the simulated specimens 11x11x70 mm tested at operating 
temperature. The results of comparison of mechanical characteristics and microstructure have been 
analysed using two types of specimens: with postweld heat treatment (PWHT) and without PWHT. It 
has been found the presence of precipitates at the grain boundaries in simulated type IV zone of HAZ 
exposed to subsequent PWHT.
C3  - Proceedings of the15th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology” TMT 2011, Prague Czech Republic
T1  - Behaviour of P91 Steel Simulated Haz at 600°C
EP  - 164
SP  - 161
UR  - https://hdl.handle.net/21.15107/rcub_machinery_5967
ER  - 

@conference{
author = "Milović, Ljubica and Manjgo, Mersida and Anđelić, Nina and Milošević-Mitić, Vesna and Jeli, Zorana and Dondur, Nikola",
year = "2011",
abstract = "An investigation has been carried out into the behaviour of type IV cracks region in heat affected zone 
(HAZ) of P91 steel at 600°C. Microstructure zones where type IV failures may occur have been 
studied in details. Results are reported on the simulated specimens 11x11x70 mm tested at operating 
temperature. The results of comparison of mechanical characteristics and microstructure have been 
analysed using two types of specimens: with postweld heat treatment (PWHT) and without PWHT. It 
has been found the presence of precipitates at the grain boundaries in simulated type IV zone of HAZ 
exposed to subsequent PWHT.",
journal = "Proceedings of the15th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology” TMT 2011, Prague Czech Republic",
title = "Behaviour of P91 Steel Simulated Haz at 600°C",
pages = "164-161",
url = "https://hdl.handle.net/21.15107/rcub_machinery_5967"
}

Milović, L., Manjgo, M., Anđelić, N., Milošević-Mitić, V., Jeli, Z.,& Dondur, N.. (2011). Behaviour of P91 Steel Simulated Haz at 600°C. in Proceedings of the15th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology” TMT 2011, Prague Czech Republic, 161-164.
https://hdl.handle.net/21.15107/rcub_machinery_5967

Milović L, Manjgo M, Anđelić N, Milošević-Mitić V, Jeli Z, Dondur N. Behaviour of P91 Steel Simulated Haz at 600°C. in Proceedings of the15th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology” TMT 2011, Prague Czech Republic. 2011;:161-164.
https://hdl.handle.net/21.15107/rcub_machinery_5967 .

Milović, Ljubica, Manjgo, Mersida, Anđelić, Nina, Milošević-Mitić, Vesna, Jeli, Zorana, Dondur, Nikola, "Behaviour of P91 Steel Simulated Haz at 600°C" in Proceedings of the15th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology” TMT 2011, Prague Czech Republic (2011):161-164,
https://hdl.handle.net/21.15107/rcub_machinery_5967 .

TY  - JOUR
AU  - Dondur, Nikola
AU  - Pokrajac, Slobodan
AU  - Spasojević Brkić, Vesna
AU  - Grbić, Sonja
PY  - 2011
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1296
AB  - Na uzorku od 567 preduzeća koristeći poluparametrijski LP pristup određivanja multifaktorske produktivnosti (MFP) u radu je OP dekompozicijom kvantifikovana alokativna efikasnost na nivou Srbije, izabranih regiona i industrijskih sektora. U posmatranom periodu 2005 - 2007 privatizovana i nova privatna preduzeća pokazala su pozitivnu alokativnu efikasnost odnosno pozitivnu kovarijaciju učešća na tržištu i faktorske produktivnosti. Preduzeća sa većom produktivnošću su imala i veća učešća na tržištu autputa. Najveća alokativna efikasnost je zabeležena na području Vojvodine, a od industrijskih sektora u industriji duvana, drvnoj industriji i industriji prerade metala. Negativna alokativna efikasnost odnosno veće učešće na tržištu autputa firmi sa niskom faktorskom produktivnošću utvrđena je u industriji motornih vozila i proizvodnji električnih mašina.
AB  - In this paper on the sample of 567 enterprises, using the semi-parametric LP approach for estimation of multifactor productivity (MFP), the allocative efficiency was quantified by OP decomposition at the level of Serbia, of the selected regions and industrial sectors. In the observed period from 2005 to 2007, the privatised and new private-owned enterprises showed positive allocative efficiency or positive covariance between the participation in the market and factor productivity. Companies with higher productivity also had larger participation in the output market. The highest degree of allocative efficiency was recorded on the territory of Vojvodina and in terms of industrial sectors, in the tobacco industry, wood industry and metal-processing industry. Negative allocative efficiency, i.e. larger participation of the firms with low factor productivity in the output market was seen in the motor vehicle industry and electrical machinery production.
PB  - Univerzitet u Beogradu - Mašinski fakultet, Beograd
T2  - FME Transactions
T1  - Dekompozicija produktivnosti i alokativna efikasnost u industriji Srbije
T1  - Decomposition of productivity and allocative efficiency in Serbian industry
EP  - 78
IS  - 2
SP  - 73
VL  - 39
UR  - https://hdl.handle.net/21.15107/rcub_machinery_1296
ER  - 

@article{
author = "Dondur, Nikola and Pokrajac, Slobodan and Spasojević Brkić, Vesna and Grbić, Sonja",
year = "2011",
abstract = "Na uzorku od 567 preduzeća koristeći poluparametrijski LP pristup određivanja multifaktorske produktivnosti (MFP) u radu je OP dekompozicijom kvantifikovana alokativna efikasnost na nivou Srbije, izabranih regiona i industrijskih sektora. U posmatranom periodu 2005 - 2007 privatizovana i nova privatna preduzeća pokazala su pozitivnu alokativnu efikasnost odnosno pozitivnu kovarijaciju učešća na tržištu i faktorske produktivnosti. Preduzeća sa većom produktivnošću su imala i veća učešća na tržištu autputa. Najveća alokativna efikasnost je zabeležena na području Vojvodine, a od industrijskih sektora u industriji duvana, drvnoj industriji i industriji prerade metala. Negativna alokativna efikasnost odnosno veće učešće na tržištu autputa firmi sa niskom faktorskom produktivnošću utvrđena je u industriji motornih vozila i proizvodnji električnih mašina., In this paper on the sample of 567 enterprises, using the semi-parametric LP approach for estimation of multifactor productivity (MFP), the allocative efficiency was quantified by OP decomposition at the level of Serbia, of the selected regions and industrial sectors. In the observed period from 2005 to 2007, the privatised and new private-owned enterprises showed positive allocative efficiency or positive covariance between the participation in the market and factor productivity. Companies with higher productivity also had larger participation in the output market. The highest degree of allocative efficiency was recorded on the territory of Vojvodina and in terms of industrial sectors, in the tobacco industry, wood industry and metal-processing industry. Negative allocative efficiency, i.e. larger participation of the firms with low factor productivity in the output market was seen in the motor vehicle industry and electrical machinery production.",
publisher = "Univerzitet u Beogradu - Mašinski fakultet, Beograd",
journal = "FME Transactions",
title = "Dekompozicija produktivnosti i alokativna efikasnost u industriji Srbije, Decomposition of productivity and allocative efficiency in Serbian industry",
pages = "78-73",
number = "2",
volume = "39",
url = "https://hdl.handle.net/21.15107/rcub_machinery_1296"
}

Dondur, N., Pokrajac, S., Spasojević Brkić, V.,& Grbić, S.. (2011). Dekompozicija produktivnosti i alokativna efikasnost u industriji Srbije. in FME Transactions
Univerzitet u Beogradu - Mašinski fakultet, Beograd., 39(2), 73-78.
https://hdl.handle.net/21.15107/rcub_machinery_1296

Dondur N, Pokrajac S, Spasojević Brkić V, Grbić S. Dekompozicija produktivnosti i alokativna efikasnost u industriji Srbije. in FME Transactions. 2011;39(2):73-78.
https://hdl.handle.net/21.15107/rcub_machinery_1296 .

Dondur, Nikola, Pokrajac, Slobodan, Spasojević Brkić, Vesna, Grbić, Sonja, "Dekompozicija produktivnosti i alokativna efikasnost u industriji Srbije" in FME Transactions, 39, no. 2 (2011):73-78,
https://hdl.handle.net/21.15107/rcub_machinery_1296 .

TY  - JOUR
AU  - Spasojević Brkić, Vesna
AU  - Dondur, Nikola
AU  - Komatina, Mirko
AU  - Curović, Dejan
AU  - Klarin, Milivoj
PY  - 2011
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1233
AB  - In a large number of companies, quality management (QM) programs and standardization in the field of quality have not led to higher organizational efficiency or better performances; therefore, the goal of this work is to conduct empirical research into whether quality management factors serve as reliable and valid predictors of total factor productivity (TFP) and if so, how they influence it. The data were collected in the period 2004 to 2009 from a stratified random sample drawn from Serbian industrial firms certified according to ISO 9000 with a total number of 176 observations from the research instruments. In order to determine the total factor productivity through the production function, those variables which describe the dependence of added value and labour and capital factors of production were used. For the QM data, the results underwent factor analysis and composite reliability calculations so as to be used later as independent variables in multiple regression. The central finding of this study is that QM factors provide a reliable and valid instrument for predicting total factor productivity. Two of the elements of QM, leadership and management support for quality programs and continuous quality improvement, proved to have a significantly positive effect on TFP, while the other categories in our study did not. The results of the research are directed at showing companies with limited resources which QM elements they should pay more attention to in the aim of achieving higher productivity.
PB  - Academic Journals, Victoria Island
T2  - African Journal of Business Management
T1  - The relationship between effectiveness of quality management and total factor productivity
EP  - 9213
IS  - 22
SP  - 9200
VL  - 5
UR  - https://hdl.handle.net/21.15107/rcub_machinery_1233
ER  - 

@article{
author = "Spasojević Brkić, Vesna and Dondur, Nikola and Komatina, Mirko and Curović, Dejan and Klarin, Milivoj",
year = "2011",
abstract = "In a large number of companies, quality management (QM) programs and standardization in the field of quality have not led to higher organizational efficiency or better performances; therefore, the goal of this work is to conduct empirical research into whether quality management factors serve as reliable and valid predictors of total factor productivity (TFP) and if so, how they influence it. The data were collected in the period 2004 to 2009 from a stratified random sample drawn from Serbian industrial firms certified according to ISO 9000 with a total number of 176 observations from the research instruments. In order to determine the total factor productivity through the production function, those variables which describe the dependence of added value and labour and capital factors of production were used. For the QM data, the results underwent factor analysis and composite reliability calculations so as to be used later as independent variables in multiple regression. The central finding of this study is that QM factors provide a reliable and valid instrument for predicting total factor productivity. Two of the elements of QM, leadership and management support for quality programs and continuous quality improvement, proved to have a significantly positive effect on TFP, while the other categories in our study did not. The results of the research are directed at showing companies with limited resources which QM elements they should pay more attention to in the aim of achieving higher productivity.",
publisher = "Academic Journals, Victoria Island",
journal = "African Journal of Business Management",
title = "The relationship between effectiveness of quality management and total factor productivity",
pages = "9213-9200",
number = "22",
volume = "5",
url = "https://hdl.handle.net/21.15107/rcub_machinery_1233"
}

Spasojević Brkić, V., Dondur, N., Komatina, M., Curović, D.,& Klarin, M.. (2011). The relationship between effectiveness of quality management and total factor productivity. in African Journal of Business Management
Academic Journals, Victoria Island., 5(22), 9200-9213.
https://hdl.handle.net/21.15107/rcub_machinery_1233

Spasojević Brkić V, Dondur N, Komatina M, Curović D, Klarin M. The relationship between effectiveness of quality management and total factor productivity. in African Journal of Business Management. 2011;5(22):9200-9213.
https://hdl.handle.net/21.15107/rcub_machinery_1233 .

Spasojević Brkić, Vesna, Dondur, Nikola, Komatina, Mirko, Curović, Dejan, Klarin, Milivoj, "The relationship between effectiveness of quality management and total factor productivity" in African Journal of Business Management, 5, no. 22 (2011):9200-9213,
https://hdl.handle.net/21.15107/rcub_machinery_1233 .

TY  - GEN
AU  - Čolić Damjanović, Vesna Mila
AU  - Čantrak, Đorđe
AU  - Dondur, Nikola
AU  - Banjac, Miloš
AU  - Babačev, Nebojša
AU  - Ilić, Dejan
AU  - Branisavljević, Nemanja
AU  - Ilić, Bratislav
AU  - Janković, Milica
AU  - Petrović, Jovana
AU  - Stamenić, Mirjana
AU  - Mikulović, Jovan
AU  - Lečić, Milan
AU  - Janković, Novica
AU  - Đurišić, Željko
AU  - Kostić, Dušan
AU  - Kokotović, Branko
AU  - Ranđelović, Anja
AU  - Ćoćić, Aleksandar
AU  - Terzović, Jefto
AU  - Trifunović, Jovan
PY  - 2010
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6858
AB  - Опис: Приказано технико решење представља сублимацију модерних знања из архитектуре, машинства, електротехнике и грађевинарства, као и економије. Различити су концепти енергетски ефикасних објеката. Приказано техничко решење представља изузетно енергетски ефикасан, пасиван стамбени вишепородичан објекат, по први пут, на овај начин, повезујући значајан број области примењених наука у целину, која има свој научно-стручни, али и друштвено-економски значај.
T2  - Техничко решење прихваћено од стране Истраживачко-стручног већа Машинског факултета Универзитета у Београду
T1  - Развојни концепти вишепородичног пасивног стамбеног објекта са елементима аутоматизације
UR  - https://hdl.handle.net/21.15107/rcub_machinery_6858
ER  - 

@misc{
author = "Čolić Damjanović, Vesna Mila and Čantrak, Đorđe and Dondur, Nikola and Banjac, Miloš and Babačev, Nebojša and Ilić, Dejan and Branisavljević, Nemanja and Ilić, Bratislav and Janković, Milica and Petrović, Jovana and Stamenić, Mirjana and Mikulović, Jovan and Lečić, Milan and Janković, Novica and Đurišić, Željko and Kostić, Dušan and Kokotović, Branko and Ranđelović, Anja and Ćoćić, Aleksandar and Terzović, Jefto and Trifunović, Jovan",
year = "2010",
abstract = "Опис: Приказано технико решење представља сублимацију модерних знања из архитектуре, машинства, електротехнике и грађевинарства, као и економије. Различити су концепти енергетски ефикасних објеката. Приказано техничко решење представља изузетно енергетски ефикасан, пасиван стамбени вишепородичан објекат, по први пут, на овај начин, повезујући значајан број области примењених наука у целину, која има свој научно-стручни, али и друштвено-економски значај.",
journal = "Техничко решење прихваћено од стране Истраживачко-стручног већа Машинског факултета Универзитета у Београду",
title = "Развојни концепти вишепородичног пасивног стамбеног објекта са елементима аутоматизације",
url = "https://hdl.handle.net/21.15107/rcub_machinery_6858"
}

Čolić Damjanović, V. M., Čantrak, Đ., Dondur, N., Banjac, M., Babačev, N., Ilić, D., Branisavljević, N., Ilić, B., Janković, M., Petrović, J., Stamenić, M., Mikulović, J., Lečić, M., Janković, N., Đurišić, Ž., Kostić, D., Kokotović, B., Ranđelović, A., Ćoćić, A., Terzović, J.,& Trifunović, J.. (2010). Развојни концепти вишепородичног пасивног стамбеног објекта са елементима аутоматизације. in Техничко решење прихваћено од стране Истраживачко-стручног већа Машинског факултета Универзитета у Београду.
https://hdl.handle.net/21.15107/rcub_machinery_6858

Čolić Damjanović VM, Čantrak Đ, Dondur N, Banjac M, Babačev N, Ilić D, Branisavljević N, Ilić B, Janković M, Petrović J, Stamenić M, Mikulović J, Lečić M, Janković N, Đurišić Ž, Kostić D, Kokotović B, Ranđelović A, Ćoćić A, Terzović J, Trifunović J. Развојни концепти вишепородичног пасивног стамбеног објекта са елементима аутоматизације. in Техничко решење прихваћено од стране Истраживачко-стручног већа Машинског факултета Универзитета у Београду. 2010;.
https://hdl.handle.net/21.15107/rcub_machinery_6858 .

Čolić Damjanović, Vesna Mila, Čantrak, Đorđe, Dondur, Nikola, Banjac, Miloš, Babačev, Nebojša, Ilić, Dejan, Branisavljević, Nemanja, Ilić, Bratislav, Janković, Milica, Petrović, Jovana, Stamenić, Mirjana, Mikulović, Jovan, Lečić, Milan, Janković, Novica, Đurišić, Željko, Kostić, Dušan, Kokotović, Branko, Ranđelović, Anja, Ćoćić, Aleksandar, Terzović, Jefto, Trifunović, Jovan, "Развојни концепти вишепородичног пасивног стамбеног објекта са елементима аутоматизације" in Техничко решење прихваћено од стране Истраживачко-стручног већа Машинског факултета Универзитета у Београду (2010),
https://hdl.handle.net/21.15107/rcub_machinery_6858 .

TY  - JOUR
AU  - Dondur, Nikola
AU  - Komatina, Mirko
AU  - Spasojević Brkić, Vesna
PY  - 2010
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1061
AB  - Koristeći pristup kroz totalnu faktorsku produktivnost (TFP) u radu su empirijski određene razlike u ekonomskoj efikasnosti privatnih industrijskih preduzeća u Srbiji. Na panel uzorku od 567 firmi u periodu 2005-2007 utvrđeno je da su firme u većinskom stranom vlasništvu, izvozno orjentisane i novoformirane firme imale za 18%, 37% i 26% veću produktivnost od prosečne produktivnosti na teritoriji Srbije. Regionalno posmatrano najveće razlike u produktivnosti po osnovu stranog vlasništva utvrđene su na području Centralne Srbije dok su izvozno orjentisane i novoformirane firme bile najefikasnije na području Beograda. .
AB  - Using the total factor productivity (TFP) approach we empirically estimated the differences in economic efficiency of private industrial firms in Serbia. On the panel data from a sample of 567 companies in the period 2005-2007, it was found that majority-foreign owned companies, as well as export-oriented and newly-founded private firms recorded higher productivity than the average in Serbia by 18%, 37% and 26% respectively. From the regional aspect, the biggest differences in productivity resulting from foreign capital ownership are seen in the region of Central Serbia, whereas export-oriented and newly-founded firms were most efficient in the area of Belgrade. .
PB  - Ekonomski institut, Beograd
T2  - Industrija
T1  - Performance of industrial companies after ownership transformation
EP  - 39
IS  - 4
SP  - 29
VL  - 38
UR  - https://hdl.handle.net/21.15107/rcub_machinery_1061
ER  - 

@article{
author = "Dondur, Nikola and Komatina, Mirko and Spasojević Brkić, Vesna",
year = "2010",
abstract = "Koristeći pristup kroz totalnu faktorsku produktivnost (TFP) u radu su empirijski određene razlike u ekonomskoj efikasnosti privatnih industrijskih preduzeća u Srbiji. Na panel uzorku od 567 firmi u periodu 2005-2007 utvrđeno je da su firme u većinskom stranom vlasništvu, izvozno orjentisane i novoformirane firme imale za 18%, 37% i 26% veću produktivnost od prosečne produktivnosti na teritoriji Srbije. Regionalno posmatrano najveće razlike u produktivnosti po osnovu stranog vlasništva utvrđene su na području Centralne Srbije dok su izvozno orjentisane i novoformirane firme bile najefikasnije na području Beograda. ., Using the total factor productivity (TFP) approach we empirically estimated the differences in economic efficiency of private industrial firms in Serbia. On the panel data from a sample of 567 companies in the period 2005-2007, it was found that majority-foreign owned companies, as well as export-oriented and newly-founded private firms recorded higher productivity than the average in Serbia by 18%, 37% and 26% respectively. From the regional aspect, the biggest differences in productivity resulting from foreign capital ownership are seen in the region of Central Serbia, whereas export-oriented and newly-founded firms were most efficient in the area of Belgrade. .",
publisher = "Ekonomski institut, Beograd",
journal = "Industrija",
title = "Performance of industrial companies after ownership transformation",
pages = "39-29",
number = "4",
volume = "38",
url = "https://hdl.handle.net/21.15107/rcub_machinery_1061"
}

Dondur, N., Komatina, M.,& Spasojević Brkić, V.. (2010). Performance of industrial companies after ownership transformation. in Industrija
Ekonomski institut, Beograd., 38(4), 29-39.
https://hdl.handle.net/21.15107/rcub_machinery_1061

Dondur N, Komatina M, Spasojević Brkić V. Performance of industrial companies after ownership transformation. in Industrija. 2010;38(4):29-39.
https://hdl.handle.net/21.15107/rcub_machinery_1061 .

Dondur, Nikola, Komatina, Mirko, Spasojević Brkić, Vesna, "Performance of industrial companies after ownership transformation" in Industrija, 38, no. 4 (2010):29-39,
https://hdl.handle.net/21.15107/rcub_machinery_1061 .

TY  - JOUR
AU  - Dondur, Nikola
AU  - Antonijević, Dragi
AU  - Komatina, Mirko
PY  - 2010
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1052
AB  - Koristeći pristup kroz totalnu faktorsku produktivnost (TFP) na panel uzorku od 237 privatnih preduzeća iz 33 privredna sektora za period 2005-2007 utvrđeno je da su firme sa većinskim stranim vlasništvom imale za 43%, izvozna preduzeća za 63% a nova privatna preduzeća za 36% veći nivo produktivnosti od prosečne produktivnosti na području Beograda. Ukupni efekti izvoza i tržišne koncentracije na dodatu vrednost preduzeća su bili 0,511 i 0,11 respektivno.
AB  - By using Total Factor Productivity (TFP) approach on the panel sample of 237 private companies from 33 economic sectors for the 2005-2007 period, it was found that companies with majority foreign ownership had by 43%, export companies by 63% and new private companies by 36% higher level of productivity than the average productivity in the territory of Belgrade. Total effects of exports and market concentration on the companies' value added amounted to 0.511 and 0.11 respectively.
PB  - Društvo ekonomista Beograda, Beograd
T2  - Ekonomski vidici
T1  - Efikasnost privatizovanih preduzeća na području Beograda
EP  - 380
IS  - 3
SP  - 369
VL  - 15
UR  - https://hdl.handle.net/21.15107/rcub_machinery_1052
ER  - 

@article{
author = "Dondur, Nikola and Antonijević, Dragi and Komatina, Mirko",
year = "2010",
abstract = "Koristeći pristup kroz totalnu faktorsku produktivnost (TFP) na panel uzorku od 237 privatnih preduzeća iz 33 privredna sektora za period 2005-2007 utvrđeno je da su firme sa većinskim stranim vlasništvom imale za 43%, izvozna preduzeća za 63% a nova privatna preduzeća za 36% veći nivo produktivnosti od prosečne produktivnosti na području Beograda. Ukupni efekti izvoza i tržišne koncentracije na dodatu vrednost preduzeća su bili 0,511 i 0,11 respektivno., By using Total Factor Productivity (TFP) approach on the panel sample of 237 private companies from 33 economic sectors for the 2005-2007 period, it was found that companies with majority foreign ownership had by 43%, export companies by 63% and new private companies by 36% higher level of productivity than the average productivity in the territory of Belgrade. Total effects of exports and market concentration on the companies' value added amounted to 0.511 and 0.11 respectively.",
publisher = "Društvo ekonomista Beograda, Beograd",
journal = "Ekonomski vidici",
title = "Efikasnost privatizovanih preduzeća na području Beograda",
pages = "380-369",
number = "3",
volume = "15",
url = "https://hdl.handle.net/21.15107/rcub_machinery_1052"
}

Dondur, N., Antonijević, D.,& Komatina, M.. (2010). Efikasnost privatizovanih preduzeća na području Beograda. in Ekonomski vidici
Društvo ekonomista Beograda, Beograd., 15(3), 369-380.
https://hdl.handle.net/21.15107/rcub_machinery_1052

Dondur N, Antonijević D, Komatina M. Efikasnost privatizovanih preduzeća na području Beograda. in Ekonomski vidici. 2010;15(3):369-380.
https://hdl.handle.net/21.15107/rcub_machinery_1052 .

Dondur, Nikola, Antonijević, Dragi, Komatina, Mirko, "Efikasnost privatizovanih preduzeća na području Beograda" in Ekonomski vidici, 15, no. 3 (2010):369-380,
https://hdl.handle.net/21.15107/rcub_machinery_1052 .

TY  - CONF
AU  - Čantrak, Đorđe
AU  - Dondur, Nikola
AU  - Čolić Damjanović, Vesna Mila
AU  - Ilić, Bratislav
AU  - Banjac, Miloš
AU  - Babačev, Nataša
AU  - Ilić, Dejan
AU  - Kostić, Dušan
PY  - 2009
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/5006
AB  - This paper presents some technological and economic aspects of the project inspired by numerous initiatives in extremely low energy consumption energy efficient building in modern architecture. Project main aim was to present a new model of the integral application of science, education, enterprise and the public sector in the future transformation of cityscape, thus forming guidelines for urban residential development in Serbia.
PB  - Belgrade : Faculty of Mechanical Engineering,
C3  - Proceedings, 4th International Symposium of Industrial Engineering, SIE 2009., Industrial Engineering Department, Faculty of Mechanical Engineering, University of Belgrade and Steinbeis Advanced Risk Technologies, Stuttgart, Germany, Belgrade, December 10-11. 2009.
T1  - Economic Analysis of the Passive and Intelligent Multifamily Residential Building in Belgrade
EP  - 42
SP  - 40
UR  - https://hdl.handle.net/21.15107/rcub_machinery_5006
ER  - 

@conference{
author = "Čantrak, Đorđe and Dondur, Nikola and Čolić Damjanović, Vesna Mila and Ilić, Bratislav and Banjac, Miloš and Babačev, Nataša and Ilić, Dejan and Kostić, Dušan",
year = "2009",
abstract = "This paper presents some technological and economic aspects of the project inspired by numerous initiatives in extremely low energy consumption energy efficient building in modern architecture. Project main aim was to present a new model of the integral application of science, education, enterprise and the public sector in the future transformation of cityscape, thus forming guidelines for urban residential development in Serbia.",
publisher = "Belgrade : Faculty of Mechanical Engineering,",
journal = "Proceedings, 4th International Symposium of Industrial Engineering, SIE 2009., Industrial Engineering Department, Faculty of Mechanical Engineering, University of Belgrade and Steinbeis Advanced Risk Technologies, Stuttgart, Germany, Belgrade, December 10-11. 2009.",
title = "Economic Analysis of the Passive and Intelligent Multifamily Residential Building in Belgrade",
pages = "42-40",
url = "https://hdl.handle.net/21.15107/rcub_machinery_5006"
}

Čantrak, Đ., Dondur, N., Čolić Damjanović, V. M., Ilić, B., Banjac, M., Babačev, N., Ilić, D.,& Kostić, D.. (2009). Economic Analysis of the Passive and Intelligent Multifamily Residential Building in Belgrade. in Proceedings, 4th International Symposium of Industrial Engineering, SIE 2009., Industrial Engineering Department, Faculty of Mechanical Engineering, University of Belgrade and Steinbeis Advanced Risk Technologies, Stuttgart, Germany, Belgrade, December 10-11. 2009.
Belgrade : Faculty of Mechanical Engineering,., 40-42.
https://hdl.handle.net/21.15107/rcub_machinery_5006

Čantrak Đ, Dondur N, Čolić Damjanović VM, Ilić B, Banjac M, Babačev N, Ilić D, Kostić D. Economic Analysis of the Passive and Intelligent Multifamily Residential Building in Belgrade. in Proceedings, 4th International Symposium of Industrial Engineering, SIE 2009., Industrial Engineering Department, Faculty of Mechanical Engineering, University of Belgrade and Steinbeis Advanced Risk Technologies, Stuttgart, Germany, Belgrade, December 10-11. 2009.. 2009;:40-42.
https://hdl.handle.net/21.15107/rcub_machinery_5006 .

Čantrak, Đorđe, Dondur, Nikola, Čolić Damjanović, Vesna Mila, Ilić, Bratislav, Banjac, Miloš, Babačev, Nataša, Ilić, Dejan, Kostić, Dušan, "Economic Analysis of the Passive and Intelligent Multifamily Residential Building in Belgrade" in Proceedings, 4th International Symposium of Industrial Engineering, SIE 2009., Industrial Engineering Department, Faculty of Mechanical Engineering, University of Belgrade and Steinbeis Advanced Risk Technologies, Stuttgart, Germany, Belgrade, December 10-11. 2009. (2009):40-42,
https://hdl.handle.net/21.15107/rcub_machinery_5006 .

TY  - JOUR
AU  - Radojević, Slobodan
AU  - Veljković, Zorica
AU  - Dondur, Nikola
PY  - 2007
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/761
AB  - U ovom radu je prikazan subjektivni pristup i istraživanje obrazovanja statističkih metoda na mašinskim fakultetima zemalja Evropske unije, kao osnova za postizanje svetskog nivoa kvaliteta i konkurentnosti proizvoda i usluga na svetskom tržištu. Sugestije za poboljšanje statističkog obrazovanja su prikazane sa ciljem da se prevaziđe postojeći jaz između inženjera i naučnika koji se bave primenjenom naukom, sa jedne strane i matematičara sa druge.
AB  - This paper presents a subjective view and a research of the education of the statistical methods in Mechanical Engineering Faculties in EU countries, as a base for achieving world class quality in good and services. Suggestions for an improvement of the statistical education were presented in order to overcome the existing gap between engineers and scientists on one side and mathematicians on the other.
PB  - Ekonomski institut, Beograd
T2  - Industrija
T1  - Statistics in engineering education
EP  - 79
IS  - 4
SP  - 73
VL  - 35
UR  - https://hdl.handle.net/21.15107/rcub_machinery_761
ER  - 

@article{
author = "Radojević, Slobodan and Veljković, Zorica and Dondur, Nikola",
year = "2007",
abstract = "U ovom radu je prikazan subjektivni pristup i istraživanje obrazovanja statističkih metoda na mašinskim fakultetima zemalja Evropske unije, kao osnova za postizanje svetskog nivoa kvaliteta i konkurentnosti proizvoda i usluga na svetskom tržištu. Sugestije za poboljšanje statističkog obrazovanja su prikazane sa ciljem da se prevaziđe postojeći jaz između inženjera i naučnika koji se bave primenjenom naukom, sa jedne strane i matematičara sa druge., This paper presents a subjective view and a research of the education of the statistical methods in Mechanical Engineering Faculties in EU countries, as a base for achieving world class quality in good and services. Suggestions for an improvement of the statistical education were presented in order to overcome the existing gap between engineers and scientists on one side and mathematicians on the other.",
publisher = "Ekonomski institut, Beograd",
journal = "Industrija",
title = "Statistics in engineering education",
pages = "79-73",
number = "4",
volume = "35",
url = "https://hdl.handle.net/21.15107/rcub_machinery_761"
}

Radojević, S., Veljković, Z.,& Dondur, N.. (2007). Statistics in engineering education. in Industrija
Ekonomski institut, Beograd., 35(4), 73-79.
https://hdl.handle.net/21.15107/rcub_machinery_761

Radojević S, Veljković Z, Dondur N. Statistics in engineering education. in Industrija. 2007;35(4):73-79.
https://hdl.handle.net/21.15107/rcub_machinery_761 .

Radojević, Slobodan, Veljković, Zorica, Dondur, Nikola, "Statistics in engineering education" in Industrija, 35, no. 4 (2007):73-79,
https://hdl.handle.net/21.15107/rcub_machinery_761 .

TY  - JOUR
AU  - Dondur, Nikola
AU  - Radojević, Slobodan
AU  - Veljković, Zorica
PY  - 2007
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/757
AB  - Rad testira uticaj privatizacije i restrukturiranja na efikasnost poslovanja industrijskih preduzeća u Srbiji privatizovanih tokom 2002 i 2003 godine. Na uzorku od 45 izabranih preduzeća analiza pokazuje da se privatizacijom povećavaju prosečne vrednosti pokazatelja uspešnosti poslovanja. Nije dokazano da je to povećanje i statistički signifikantno osim u slučaju profitabilnosti ukupne ekonomije preduzeća. U radu je potvrđena hipoteza da uspešnost poslovanja privatizovanih preduzeća u postprivatizacionom periodu statistički značajno zavisi od tipa investitora i koncentracije vlasničkih prava ali ne i od dela kapitala u vlasništvu države.
AB  - This paper examine the impact of privatization and restructuring on the operating and financial performances of industrial enterprises privatized in Serbia during the period 2002-2003. The longitudinal study of 45 firms has empirically confirmed the significant increase in profitability of total assets (ROA). The impacts of buyer type and level of property rights concentration on increase of performances in postprivatization period were also confirmed.
PB  - Ekonomski institut, Beograd
T2  - Industrija
T1  - Efekti privatizacije i restrukturiranja u industrijskim preduzećima u Srbiji
EP  - 25
IS  - 3
SP  - 13
VL  - 35
UR  - https://hdl.handle.net/21.15107/rcub_machinery_757
ER  - 

@article{
author = "Dondur, Nikola and Radojević, Slobodan and Veljković, Zorica",
year = "2007",
abstract = "Rad testira uticaj privatizacije i restrukturiranja na efikasnost poslovanja industrijskih preduzeća u Srbiji privatizovanih tokom 2002 i 2003 godine. Na uzorku od 45 izabranih preduzeća analiza pokazuje da se privatizacijom povećavaju prosečne vrednosti pokazatelja uspešnosti poslovanja. Nije dokazano da je to povećanje i statistički signifikantno osim u slučaju profitabilnosti ukupne ekonomije preduzeća. U radu je potvrđena hipoteza da uspešnost poslovanja privatizovanih preduzeća u postprivatizacionom periodu statistički značajno zavisi od tipa investitora i koncentracije vlasničkih prava ali ne i od dela kapitala u vlasništvu države., This paper examine the impact of privatization and restructuring on the operating and financial performances of industrial enterprises privatized in Serbia during the period 2002-2003. The longitudinal study of 45 firms has empirically confirmed the significant increase in profitability of total assets (ROA). The impacts of buyer type and level of property rights concentration on increase of performances in postprivatization period were also confirmed.",
publisher = "Ekonomski institut, Beograd",
journal = "Industrija",
title = "Efekti privatizacije i restrukturiranja u industrijskim preduzećima u Srbiji",
pages = "25-13",
number = "3",
volume = "35",
url = "https://hdl.handle.net/21.15107/rcub_machinery_757"
}

Dondur, N., Radojević, S.,& Veljković, Z.. (2007). Efekti privatizacije i restrukturiranja u industrijskim preduzećima u Srbiji. in Industrija
Ekonomski institut, Beograd., 35(3), 13-25.
https://hdl.handle.net/21.15107/rcub_machinery_757

Dondur N, Radojević S, Veljković Z. Efekti privatizacije i restrukturiranja u industrijskim preduzećima u Srbiji. in Industrija. 2007;35(3):13-25.
https://hdl.handle.net/21.15107/rcub_machinery_757 .

Dondur, Nikola, Radojević, Slobodan, Veljković, Zorica, "Efekti privatizacije i restrukturiranja u industrijskim preduzećima u Srbiji" in Industrija, 35, no. 3 (2007):13-25,
https://hdl.handle.net/21.15107/rcub_machinery_757 .